User Panel
User Panel
User Panel
|
Posted: 1/28/2024 2:21:39 PM EDT
 Best Millimeter Stribog | Grand Power | Shot Show 2024 I am getting pretty excited for these. I've been lusting over the SMG45 for a while now, but could never justify the price of one, especially given the issues they have had. I think the Stribog will scratch that itch. I've never owned or even shot a Stribog, but reading reviews of the 9mm versions, they seem like pretty good guns. Do most people order these directly from Global Ordnance, or is it better to go through a different distributor? Also, I've read about getting a different roller (40 degree) for shooting suppressed. Does anyone know if the same roller work in the 10mm/.45 guns, or will it be caliber specific? As far as UMP mags go, where are some good places to get them? |
|
|
|
|
Posted: 1/28/2024 2:57:12 PM EDT
[#1]
I had planned to upgrade from the SP9A1 to the SP9A3G. Now I’m going to keep the SP9A1 and buy the SP45A3. I really like that they lengthened the hand guard, and the UMP magazine is a welcome improvement.
|
|
|
|
TX, USA
|
Posted: 1/28/2024 4:42:27 PM EDT
[#2]
It's good that they realize they make a fantastic gun - but can't seem to make a good magazine. Glad they went with a proven mag.
The 9MM Stribogs run 100% with a lower that takes Scorpion mags. The OEM mags are the guns only shortcoming. As for the roller block - not sure. For 9MM you can get 45 (standard for US models), 40, and 35 degree. I'm using the 40 degree in mine and it shoots incredibly soft. Far softer than any direct blowback or B&T with their hydraulic buffer system. Kind of curious to try the 35 degree, but not having any issues at all with the 40 so don't want to push my luck. |
|
|
|
Posted: 1/30/2024 9:08:07 AM EDT
[#3]
Do most people order Stribogs directly from Global Ordnance, or is it better to go through a different distributor?
|
|
|
|
TX, USA
|
Posted: 1/30/2024 10:33:55 AM EDT
[#4]
Quote HistoryOriginally Posted By Bravo_Six: Do most people order Stribogs directly from Global Ordnance, or is it better to go through a different distributor? Bought my 9mm from gun zone deals. They were the cheapest out of everyone. Global does have a nice industry discount though if you work in the industry. |
|
|
|
Posted: 1/30/2024 9:21:53 PM EDT
[#5]
Quote HistoryOriginally Posted By TactiCoolBro: Bought my 9mm from gun zone deals. They were the cheapest out of everyone. Global does have a nice industry discount though if you work in the industry. Quote HistoryOriginally Posted By TactiCoolBro: Originally Posted By Bravo_Six: Do most people order Stribogs directly from Global Ordnance, or is it better to go through a different distributor? Bought my 9mm from gun zone deals. They were the cheapest out of everyone. Global does have a nice industry discount though if you work in the industry. 
|
|
|
|
OR, USA
|
Posted: 1/30/2024 11:00:14 PM EDT
[#6]
Quote HistoryOriginally Posted By TactiCoolBro: Bought my 9mm from gun zone deals. They were the cheapest out of everyone. Global does have a nice industry discount though if you work in the industry. Weird. I can purchase the 10mm version but they won't ship the .22 version to Oregon.... |
|
|
CT, USA
|
Posted: 1/30/2024 11:14:32 PM EDT
[#7]
Ump 45 mag source
https://hkparts.net/rifle-parts/hk-ump-usc-series/hk-ump-usc-magazines-extensions/ |
|
|
|
Posted: 1/31/2024 1:02:33 AM EDT
[#8]
Quote HistoryOriginally Posted By jhoule: Ump 45 mag source https://hkparts.net/rifle-parts/hk-ump-usc-series/hk-ump-usc-magazines-extensions/ How well do those aftermarket mags work? |
|
|
|
CT, USA
|
Posted: 1/31/2024 8:04:38 AM EDT
[#9]
OEM manufacturer for smg45 lwrci mags. I haven’t had any issues with them or the ones that came with my smg45.
|
|
|
|
Posted: 1/31/2024 9:35:57 PM EDT
[#10]
Quote HistoryOriginally Posted By jhoule: OEM manufacturer for smg45 lwrci mags. I haven’t had any issues with them or the ones that came with my smg45. Nice. Thanks! |
|
|
|
|
Posted: 2/1/2024 10:33:36 PM EDT
[#11]
Quote HistoryOriginally Posted By Bravo_Six: Nice. Thanks! Quote HistoryOriginally Posted By Bravo_Six: Originally Posted By jhoule: OEM manufacturer for smg45 lwrci mags. I haven’t had any issues with them or the ones that came with my smg45. Nice. Thanks! I use them in my Omega UMP-clone without issue as well. Knowing the Stribog 45 uses UMP mags has very much increased my interest in it since I’m already setup for those. |
|
|
|
|
Posted: 2/3/2024 11:44:29 PM EDT
[#12]
Any word yet on when these might be hitting the shelves?
In the next 30 days, or more like "before the end of 2024"? |
|
|
|
|
Posted: 2/5/2024 10:37:41 AM EDT
[#13]
Quote HistoryOriginally Posted By Kent: Any word yet on when these might be hitting the shelves? In the next 30 days, or more like "before the end of 2024"? In the video in OP, GO said they are expecting them to come in end of February. |
|
|
|
VA, USA
|
Posted: 3/19/2024 12:54:48 PM EDT
[#14]
Any update on these?
|
|
|
|
Posted: 3/19/2024 7:46:21 PM EDT
[#15]
Quote HistoryOriginally Posted By flyer: Any update on these? There was a poster on Reddit who said end of April. Also, the price is now $1450 for the braced model and $1300 for t he neutered version. I'm still interested, but my enthusiasm is lessening by the week. |
|
|
|
|
Posted: 3/19/2024 8:07:04 PM EDT
[#16]
Quote HistoryOriginally Posted By Bravo_Six: There was a poster on Reddit who said end of April. Also, the price is now $1450 for the braced model and $1300 for t he neutered version. I'm still interested, but my enthusiasm is lessening by the week. Wow. Thanks for that info. $1300 is right up there. Perhaps I need to rethink. Could just wait for the LC Charger 45 -- those will probably be around $1k or less after the initial rush, and they'll take cheap and easy-to-find G21 mags. |
|
|
|
OR, USA
|
Posted: 3/19/2024 10:47:09 PM EDT
[#17]
Quote HistoryOriginally Posted By sparky923: Weird. I can purchase the 10mm version but they won't ship the .22 version to Oregon.... They said that about the sp9A3G. I emailed asking why and they removed OR from the list. |
|
|
VA, USA
|
Posted: 3/26/2024 4:52:24 AM EDT
[#18]
Any updates on when this will be out?
|
|
|
|
Posted: 3/26/2024 4:27:30 PM EDT
[#19]
Quote HistoryOriginally Posted By flyer: Any updates on when this will be out? There was a poster on Reddit who said end of April. |
|
|
|
VA, USA
|
Posted: 4/25/2024 1:25:08 PM EDT
[#20]
Getting to the end of April, anyone heard anything new about the SP45A3???
|
|
|
OR, USA
|
Posted: 5/1/2024 6:24:27 PM EDT
[#21]
|
|
|
TX, USA
|
Posted: 5/9/2024 2:23:38 PM EDT
[#22]
|
|
|
TX, USA
|
Posted: 5/10/2024 7:41:32 AM EDT
[#23]
Quote HistoryOriginally Posted By TactiCoolBro: It's good that they realize they make a fantastic gun - but can't seem to make a good magazine. Glad they went with a proven mag. The 9MM Stribogs run 100% with a lower that takes Scorpion mags. The OEM mags are the guns only shortcoming. As for the roller block - not sure. For 9MM you can get 45 (standard for US models), 40, and 35 degree. I'm using the 40 degree in mine and it shoots incredibly soft. Far softer than any direct blowback or B&T with their hydraulic buffer system. Kind of curious to try the 35 degree, but not having any issues at all with the 40 so don't want to push my luck. Where does one purchase a 35 degree Stribog block? Never even heard of this before. |
|
|
VA, USA
|
Posted: 5/15/2024 10:03:10 AM EDT
[#24]
Anyone seen these anywhere else yet?
|
|
|
|
Posted: Yesterday 3:36:55 PM EDT
[#25]
Quote HistoryOriginally Posted By flyer: Anyone seen these anywhere else yet? I have one. Is non-concentric with 3 different mounts and suppressors. Have contacted customer service. The rest of it seems pretty awesome, it's tight, smooth. The plastic box it comes in even has metal hinges. There are obvious efforts made for quality. The .578x28 thread pitch is a necessity on pistol barrels, but they have enough meat on the barrel that I wish they would have just done 5/8x24 with a shoulder (if they could). The push button mag release is a little hard if you use your pointer finger, but great if you use your thumb, but the little paddle release is great and not too big to snag. Factory UMP mags fit. Haven't shot it yet, stuff fell through, kinda bummed about the non-alignment with the suppressor issue, and that's the whole reason I bought it. |
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
.jpg)
Attached File