updated 5/8/12



Several items are on backorder due to a backlog at YHM but more are on order and will hopefully be in soon.  Feel free to email us to get on the reserve/notify list.

Yankee Hill Machine Quick Deploy flip up front & rear low profile sights -



YHM-5010 dual aperture installed on a rifle (peep can be folded down but you'll have the small peep when first deployed) –– Picture

YHM-5030 installed on a rifle –– Picture

YHM's new Quick Deploy Sight System features an automatic deploy system that springs the sight up with the push of a button. Both front and rear sights lock positively in the folded and deployed positions and are made from aircraft quality aluminum and hardcoated to military specifications.

The rear sight is available with either a single large peep (5010-L), single small peep (5010-S), or dual peep aperture (YHM-5010). When folded the sight measures just .435 inches from the rail.

The front sight mounts on the same plane as the rear and uses standard hardware. It is available with either a hooded (5030-H) or standard stem (YHM-5030). When folded the sight measures just .435 inches from the rail.


YHM-5010 / 5010-L / 5010S –– $86.50 del.

YHM-5030 or 5030-H –– $73.00 del.

QDS set (front & rear) –– On Special –– $150.00 del.


Yankee Hill Machine flip rear sight assemblies in A1 or A2 format -

A2 - A1 -

YHM flip rear BUIS –– Features include: a rugged but lightweight design with a steel base, a quick release thumb screw, and aluminum stem. Locks in the deployed position with ease and takes up very little space on the upper receiver. When folded it only measures .840 inches from the highest point down to the top of the upper receiver. It has a 1/2 M.O.A. and comes with a standard rear peep aperture. Mounts to any picatinny rail. Designed to co-witness with the standard M16-M4 front sight and all of the YHM front sights.

YHM-9680 –– A2 style windage adjustment - ON SPECIAL –– $68.75 del.

YHM-9680 –– A1 style windage adjustment - ON SPECIAL –– $68.75 del.

You can also add the YHM-9627 (for railed forearms) or the YHM-9584 (for railed gas blocks) for only $60.00

Flip Front sights & Gas Block assemblies -



YHM-9394 - barrel mounted Gas block with Flip front sight - Price is $75.00 del.
YHM-9395 - barrel mounted Gas block with Flip front sight without bayonet lug - Price is $75.00 del.
YHM-9394-H - barrel mounted Gas block with hooded flip front sight –– Price is $77.00 del.
YHM-9395-H - barrel mounted Gas block with hooded flip front sight without bayonet lug –– Price is $77.00 del.

The railed flip fr. sight g.b. below are on backorder but more are due in soon.  Feel free to email us to get on the reserve/notify list.

YHM-9835 - barrel mounted Gas block with Flip front sight with lower picatinny rail - Price is $84.00 del.
YHM-9835-H - barrel mounted Gas block with Flip front sight with lower picatinny rail - Price is $86.00 del.


YHM-9627 - Flip front sight assemblies for same plane railed forearms & gas blocks - $63.00 del.


YHM-9584 - Flip front sight assemblies for most railed gas blocks - $63.00 del.

YHM-9830A - Solid/Fixed front sight assemblies for same plane railed forearms & gas blocks - $34.00 del.



YHM-9385A / 9386A -  Single rail gas blocks for std. .750" barrels or lightweight .625" (9386A) barrels - $52 del.


YHM-9378 - Specter lo-profile gas block - $32.50 del.

/
YHM-9383 - slim lined low profile gas block - $23.50 del.
YHM-9384 - slim lined low profile gas block - clamp-on - $32.50 del.


YHM-9390 - Two piece railed gas block - $46.00 del.


YHM-9380 - Four rail gas block - $58.00 del.


YHM-9381A - set screw mounted low profile gas block - $46.00 del.

Riser Mounts -


YHM-230 Gas block riser - This riser allows you to use a same plane front sight on any YHM railed gas block. - $34.00 delivered


YHM-234A Extended Rail Riser - This riser adds one half inch of height to your picatinny rail and allows for the forward mounting of scopes to your flat top upper receiver. - $21.00 delivered


NEW Revision –– YHM-220 EOTech Riser - This mount elevates your EOTech .30" to give you a better sight picture. Now the iron sights will no longer obscure the EOTech reticle. Made from aircraft quality aluminum and hardcoated to military specifications. - $34.00 delivered


YHM-227A Scope Riser - This scope mount is perfect for varmint rifles. Great for all types of scopes, red dot sights, and other optics. Raises the equipment one half inch. Mounts to any picatinny rail, made from aircraft quality aluminum and harcoated to military specifications. - $28.00 delivered

YHM Picatinny Risers - *New and Improved* These risers now meet mil. spec 1913 and use a larger screw for more clamping power. They fit any picatinny rail. Great for elevating scopes, sights, flashlights, etc. These risers elevate your accessories 1/2”. Made from aircraft quality aluminum and hardcoated to Mil. Specs.

/
YHM-9490A - one slot 1/2" riser block - $12.75 delivered
YHM-226 - three slot 1/2" riser block - $13.75 delivered


YHM-9474 - 5 inch rail extension & 1/2" riser - allows more forward (and/or elevated) mounting of optics, lights, lasers or other accessories - $33.00 del. // 6 inch 9473 is $34.50 del.


Other Accessories -

YHM-9553 - Lg. head EoTech replacement screws for allowing much easier & quicker installation or removal - $6.50 ea.

YHM-639K - Triple rail mount - allows the mounting of lights, lasers or other accessories at 3, 6 or 9 o'clock positions.  Fits barrel diameters of .730 & .750"
(required bushings included.) - $67.00 del. –– due in soon


YHM-638 - Bipod adapters -  ON SPECIAL –– $28.00 del.


YHM offset angle adapters (add lg. head thumbscrews for quicker detach - $4.25 each):



1 slot = $16.00 // 3 slot = $22.00 // 5 slot = $24.50


[span style='color: red;']More lights, lasers, mounts and AR-15 accessories can be found here - BrightFlashlights Industry Forum


Payment info:

Checks, money orders, VISA, M/C, Discover & American Express accepted.


Thank You for your time.

hey BF, love that rifle, I hate to kinda take this OT, but can you IM with a list of the parts/peices of that rifle and possible prices you paid for it?  Thanks a bunch, wanna get some estimations of prices so I can start dreaming

Parts breakdown:

YHM-9430A - Specter length (9.675") Customizable Free Float forearm (requires Specter lo-profile gas block which is included in the following price) - $102.00 + s/h

8 7/8" rail segment - $26.50 (Specter length)
3" rail segment - $17.00 ea.

YHM-9484A - vented FF tube end cap - $16.00

YHM-638 - Bipod adapters - $26.00 (can be bypassed with certain modification)

YHM-9469 - rotating sling swivel studs for the four rail, modular & replacement h.guard systems - $3.75 ea.

YHM 3 slot angle adapter - $22.00

=========

Optics setup: Burris Fullfield II with Ballistic Plex reticle; mounted in ARMS #22H & #37 ring inserts.

Thanks, I appreciate that a lot.

Mind telling me where you got the barrel, and uppper reciever?  Then my question asking will be over

I need a yhn 5c2 fkash suppressor and 2 if the eotech screws, how do I contact you for payment  thanks

Originally Posted By OKLA-LAWMAN: I need a yhn 5c2 fkash suppressor and 2 if the eotech screws, how do I contact you for payment  thanks

It's inbound.

CALVIN, once again you set the standard for service!

Ordered early Monday, everything (YHM angle adapter, Surefire batteries, Surefire tape switch, Tangodown rail covers, YHM Thumbscrews) arrived in the mail Wednesday.
Service just doesn't get any better than this.

Many thanks
Edwin

Here's a pic.

Hello,

Do you carry the Forearm Mounted Front Fixed Sight (YHM-9830A)?  And will you ship to an APO?  Thanks.  

==>john

Originally Posted By zunrj5: Hello, Do you carry the Forearm Mounted Front Fixed Sight (YHM-9830A)?  And will you ship to an APO?  Thanks.   ==>john

I don't have any of those in yet, sorry.

Yes, we will ship to an APO and we offer an LE & Military discount.

more being added

I'm interested in the EOTech riser.  When attached how soild is it?  Does it attach with hex screws or what?  Thanks for info.

It's a very solid mount, it has one hex head clamp screw at the rear and underneath where the EOTech will sit are two set screws that are tightened to expand two locking tabs resting in the receiver cross slot.  

Great info, thanks for the pics, I hope to make an order soon.  Thanks again.

Calvin,

Ordered  a YHM-220 EOTech Riser from you on Monday, it arrived in Thursday's mail.  Wow it was just what my Robinson Armament M-96 needed.  I was using a couple of three slot YHM 1/2 inch risers, but when you pulled the EOTech off the risers blocked the use of the iron sights.  The YMH-220 did the trick, is rock solid on the RA rail.  Now with the EoTech off I can use the iron sights.  

Great item, great price, great service!

I'll call today and order another for my BM Dissy.  I want to move it's EOTech up so the iron sights are in the bottom 1/2 of the window.  

Thanks Calvin

elh

E-mail sent !

What's the lenght of the YHM-227A Scope Riser ?

thx !

Originally Posted By Sniper918: What's the lenght of the YHM-227A Scope Riser ? thx !

5.25"

i just sent you an email
this is waht im looking for
yhm rear flip up - $74 del
YHM-9830A - Solid front sight assemblies for the FF tubes - $34.00 del.
tnx
Jonas

Should I use the above email address for paypal?  I would like to order YHM-227A Scope Riser.

need 5" rail extension, yhm-9474; and bipod adapter, yhm-638.  do you have these in stock?  paypal to gmail email address?  thanks.

Hey man, I have a couple questions on the YHM Eotech riser mount.

I have a Arms 40L that will be mounted behind it and I have DPMS Glacier Guards on my AR(which sit a little higher than most standard rails).

I would like to mount the Eotech on the riser but fear that I cannot mount it far enough back to stay behind the rails, or I fear that the riser will not bring the Eotech high enough to go over the rails....

Ive been asking around and cant seem to get an answer.  If I take a chance and buy one from you and it doesnt work, what is your return policy?

Thanks in advance

-Tim

Originally Posted By captainbarred: Hey man, I have a couple questions on the YHM Eotech riser mount. I have a Arms 40L that will be mounted behind it and I have DPMS Glacier Guards on my AR(which sit a little higher than most standard rails). I would like to mount the Eotech on the riser but fear that I cannot mount it far enough back to stay behind the rails, or I fear that the riser will not bring the Eotech high enough to go over the rails.... Ive been asking around and cant seem to get an answer.  If I take a chance and buy one from you and it doesnt work, what is your return policy? Thanks in advance -Tim

First off, the YHM EOTech riser is out of stock and is currently being revised for some improvements.  Not knowing what the new revision will be like makes it hard to answer your quesstions accurately but I honestly don't believe you'll run into any interference.

Second, if you do encounter a problem and see the combo won't work just send it back.  We have a no hassle return policy on most items provided it hasn't been used & abused.

Thanks,
Calvin

email: [email protected]

Phone: (352) 732-2156 from 11am-7:30pm EST (Mon. - Fri. & until 4pm Sat.)

Excelent, thanks man, Ill keep checking back to see when you get the revised ones in stock.

found my relevant info

"The NEW Yankee Hill Machine flip rear sight assembly in A1 or A2 format -"

I got a couple of dumb questions, are both the A1 & A2, .5 moa windage adjustments?
Are both the small & large apertures on the flip peep the same elevation or can I get it
that way (in stock)? I'm looking to order an A1 flip rear sight and four black Magpul XT
(carbine length) grip panels. That looks like $121.80 delivered to NYS?
I want to send you a USPS money order so I need your mailing address if you have
everthing in stock now and the check could get to you by Monday.

Lloyd

cc  email


From:brightflashlights, 09/22/06 12:23 PM

"Yes, they're both .5" MOA adjustment.  Yes, they're the same elevation.
The total for the 9680-A1 and four black Magpul XT's would be $118.50 delivered.   Everything is in stock.
Let me know if I can help."

M.O. on the way!
Lloyd

I have a lightweight barrel I'm building an upper around. The diameter at the FSB area is .625. What are my options for a combo gas block/flipup front sight? Will the YHM-9394 work?

Originally Posted By heavily_armed: I have a lightweight barrel I'm building an upper around. The diameter at the FSB area is .625. What are my options for a combo gas block/flipup front sight? Will the YHM-9394 work?

Sorry, all three (9394/9395/9835A) are .750 only.  The only possible YHM option is to use the 9386A single rail gas block and a 9584 flip front sight.  Otherwise the PRI flip fr./gas block assy. is your only choice.

Do you have any YHM9473 or YHM9474 rail extensions in stock?  If so what is the current delivered price?

hanks!Bree

Originally Posted By breeliz: Do you have any YHM9473 or YHM9474 rail extensions in stock?  If so what is the current delivered price? Thanks! Bree

The 9474's are in stock but I am out of the 9473's at the moment.

Let me know if I can help.

Thanks,
Kevin

email: [email protected]
www.BrightFlashlights.com
Phone: (352) 732-2156 from 11am-8:00pm EST (Mon. - Fri. & until 4pm Sat.)
====================

Do you have the 9395's in stock?

Calvin,

I've got a bushy flat top carbine with an Eotech 552, YHM railed handguards, and a YHM railed gas block. If I go with the A2 folding rear sight and the A2 fixed front sight, does this set-up co-witness with the Eotech or do you need the riser. I noticed the riser description says it keeps the irons from obscuring the recticle.

I'm not looking to co-witness with the recticle, I just want my BUIS to look through the center of the glass so I get a complete target picture if my optics go down. Any help you can provide would be outstanding.

Mike

Do you have and of the 6" YHM-9473 in stock? If so i would like to order one.

Do you have a pic of an A3 upper with the YHM-9590 & YHM-9595 are mounted on a YHM-5005 forearm?

I am trying to see if these would line up like an ARMS swan sleeve setup. (YHM is my preference)

I ordered the 227A riser on tuesday and received it on Thursday, great price, fast shipping just wanted to say thanks!

can the YHM swivel sling stud (YHM-9469)
or fixed sling stud (YHM-9476) be mounted directly to the bottom of the free float customizable forearm, and can a bipod then be attached to the stud?

-Paul

Originally Posted By pd: can the YHM swivel sling stud (YHM-9469) or fixed sling stud (YHM-9476) be mounted directly to the bottom of the free float customizable forearm, and can a bipod then be attached to the stud? -Paul

If you timed the forearm 45 degrees off you can use the 9476 stud, this is what was done on this rifle --

do you carry the low profile gas blocks, YHM-9383?

Originally Posted By pd: do you carry the low profile gas blocks, YHM-9383?

We're waiting on them to come in, I am hoping they'll arrive this week.

How much with shipping to APO AE 09173? Paypal?

Hello, I’m in need of an YHM-9680 Flip rear sight and one of the NEW Revision -- YHM-220 EOTech Risers. Would it be possible to shoot me the cost on both items and the stocking status. Also are you running any deals on any of the EOTech sights?

Thanks,
Bill

Do you stock and sell the YHM low profile gas block: YHM-9383?

I do not see it listed in this post or any others here.

Thanks in advance.

Yes, it's $19.75 delivered.

BF, I'd like to order the EoTech riser, I have the daniel defense Omega that I ordered from you, will I have to remove the HG to install this riser?  

Thanks.

Calvin:

I ordered a boatload of YHM and Magpul form you and just a few days later, I received it all inside one business week from East Coast to West Coast.

Thanks for spending the time to make sure my order was right!

Best service ever.

BTW - Do you have those Specter low profile gas blocks in yet?  I forgot to ask when I snagged that YHM LW Specter Forearm from you last week.

I want an YHM-9835 H or A.... any due date?

Do you have the YHM-9383's in stock now?

Yes sir, they're in stock.

Kevin,

Are you going to stock the new YHM QDS sites?  If so, what is the price (for both front and rear)?    

I know they are a little hard to come by right now but I can be patient for these.

We have them, they're $155 delivered for the set.  The only issue is we don't have any of the semi-hooded flip fronts yet only the YHM-5030 std. M4 profile front flips.

Bottom rifle has the QDS sights -



QDS M4 profile front sight ––

Do you have the YHM folding back up rear sight (YHM-9680) with A1 style windage adjustment and the folding front sight for railed gas block (YHM-9584 ) in stock?

Yes, both are in stock, it'd be $128.75 delivered for the pair.

Let me know if I can help.

Thanks,
Kevin

email: [email protected]
www.BrightFlashlights.com
Phone: (352) 732-2156 from 11am-8:00pm EST (Mon. - Fri. & until 4pm Sat.)
====================