User Panel
[#1]
This thread delivers. Damn.
|
|
Esstac’s Retarded Social Media Influencer
|
[#2]
Originally Posted By FlashMan-7k: Dana 60 or built ford 9? View Quote Dana. Always Dana. I have Dr. Diff putting together a replica Strange S60 deal with 4.10s right now, because I intend to drive this maniac a bit. Over winter, I'll add a gear vendors. That way, I can use the 4.88 + OD ro race locally.....and try to get into Drag Week with the 4.10s + OD. I've been wanting to to Drag Week for about 15 years. Even more since my buddy won Street Machine Small Block NA a few years ago with a 420" W8 deal on pump gas. |
|
Free LAV
|
[#3]
|
|
Free LAV
|
[#4]
Needs a 4 speed
|
|
RIP Jeff Reed. Tennessee Squire, Ga. Carry member, NRA,Non-puking 72 ounce drinker 2 of 6 Norcal call sign, Forgotten.
|
[Last Edit: usp4u]
[#5]
@HangfiresGhost
Sorry man, missed that post/request. These cars have sweet asses. *the fully intact backseat is currently holding a carpet kit that I haven't dug out since delivery. Attached File Attached File |
|
Free LAV
|
[Last Edit: usp4u]
[#6]
Originally Posted By GSAR426: Another great Mopar thread brought to you by usp4u! I love the car! View Quote @GSAR426 The fun part....there are the threads/articles that are, "Blown LS3 420ci makes 830hp on pump gas" "Junkyard 5.3 Turbo deal: 901hp for Eleven Dollars" It's why I love what I do. It's why I love NA engine building. If I'm gonna make over 750hp? It takes a lot of thought, planning, and yes more money. Why do I love NA engine building? Because all the power is always there. The blower and turbo motors "ramp" the power in. These big power NA engines? They'll fucking kill you. Maybe why I also prefer 2strokes. |
|
Free LAV
|
[Last Edit: Andrapos]
[#7]
|
|
LEGALIZE FREEDOM!
|
[#8]
I love these threads. A-body 'Cudas are underappreciated.
|
|
|
[#9]
Need that 660' to be 4.40 seconds
|
|
|
[#10]
Nice Cuda BTW
|
|
|
[#11]
Any plans for an LS swap, to make it a resto-mod or trade it for a 4runner?
|
|
Not a Tennessee Squire
|
[#12]
Originally Posted By usp4u: Coil is mounted on the top of the tunnel inside the car, wire going to a male-male bulkhead connector. The forward portion is a 20"+ coil wire to the belt driven distributor. View Quote At first I was like: how quaint - a distributor! ...then noticed it wasn't embedded in the block, WTF? I've never seen a setup like that, figured it must be indexed to a crank sensor or something until you mentioned it was belt driven. Pretty cool. |
|
|
[#13]
As an LS guy I still agree that NA engines is best engines. Something about the simplicity (yes they can be) and all of the attention to details at the same time. Plus the nice crispy exhaust note and throttle response. So this is awesome to me. Plus it’s been way too long since I smelled that sweet sweet race gas.
As a side note, given it was properly setup and tuned for it, would something like this run on e85? |
|
|
[#14]
Beautiful car!!
Count me in on wanting to hear a idle clip and a few hits of the throttle. Add some more pictures too! |
|
|
[#15]
Originally Posted By SlowTA: As a side note, given it was properly setup and tuned for it, would something like this run on e85? View Quote With that CR... You wouldn't be running pump "e85", you'd be going through barrels of something like One Ethanol R. Thank god a 5gal pail of VP C23 lasts me a long time, as I only need it for a dedicated nitrous fuel cell lmao |
|
|
[#16]
Originally Posted By usp4u: @sgtgrits Nice call-back to that other thread. That shit pisses me off. There is so much work involved. I hate when dummy minimize the effort and expense that others go through. Just like that comment. View Quote View All Quotes View All Quotes Originally Posted By usp4u: Originally Posted By sgtgrits: "Ah meh, blah …. A ‘72 or ‘73 Mustang Mach 1 beats any model year Barracuda all day long." Couldn't resist. Nice score. Love me a Big Mopar hood scoop. Beside the Roadrunner my first car was a '71 Barracuda Gran Coupe. A fiberglass Six pack lift off hood found it's way onto the car. @sgtgrits Nice call-back to that other thread. That shit pisses me off. There is so much work involved. I hate when dummy minimize the effort and expense that others go through. Just like that comment. @usp4u Yep, you know it. I was thinking about an additional flex about the car and what went into the very correct restoration done by me. Wouldn't want to do that. I figured the fact it had a full 3 page article in a national magazine, a display car for 2 years running in the PPG tent at the Nats and placed a lowly 2nd in it's class at the Nats might be a bit much. Love your threads! |
|
|
[Last Edit: gearjammer351]
[#17]
Originally Posted By usp4u: @sgtgrits Nice call-back to that other thread. That shit pisses me off. There is so much work involved. I hate when dummy minimize the effort and expense that others go through. Just like that comment. View Quote View All Quotes View All Quotes Originally Posted By usp4u: Originally Posted By sgtgrits: "Ah meh, blah …. A ‘72 or ‘73 Mustang Mach 1 beats any model year Barracuda all day long." Couldn't resist. Nice score. Love me a Big Mopar hood scoop. Beside the Roadrunner my first car was a '71 Barracuda Gran Coupe. A fiberglass Six pack lift off hood found it's way onto the car. @sgtgrits Nice call-back to that other thread. That shit pisses me off. There is so much work involved. I hate when dummy minimize the effort and expense that others go through. Just like that comment. Agreed. Even if you build something I wouldn't, I ain't gonna shit on it. I admire the effort and craftsmanship. My Mach1 is not a race car or show winner - just a hot rod that I built myself. It cost me a lot in money, time, and sweat. Every time I bring it into a car thread, some jackass (who probably has never built a car) has to tell me something like it's a secretary's car, they'd rather have an El Camino, or they make a "joke" about running into crowds. 🙄 They're sooo clever, those guys. I hope the transmission in their Silverado leaks. |
|
They want you disarmed, because they know they are guilty of things for which they should be shot.
|
[#18]
I honestly cannot even imagine what 980hp feels like.
I would: hit gas and crash. I think your car is awesome. |
|
|
[#19]
Thanks for the pics. Yeah that rear end was very distinctive and what made the car to *me*.
High school buddy had a 66, which I thought was ugly as hell with the rear window. Now I think they were ahead of their time, they look like rockets. Interesting how the 66 evolved to the 67 and 68. |
|
|
[Last Edit: usp4u]
[#20]
Originally Posted By Andrapos: Awesome! I love me some '68 Bcuda What is the steering setup on that beast? Dr Diff is the man! I've got his 4-wheel 13" Cobra disc brake kit on mine. https://www.ar15.com/media/mediaFiles/166952/2017051095184342-497528.jpg View Quote Noice! Steering is a manual rack. The complete front is tubular. |
|
Free LAV
|
[#21]
|
|
Free LAV
|
[#22]
Originally Posted By usp4u: Noice! Steering is a manual rack. The complete front is tubular. View Quote You must have forearms like Popeye! But then again, everything seems to get easier and faster with that much HP I went with a Firm Feel level 3 with a 90* adapter for the PS pump lines to clear the exhaust manifolds (it's a 383 6-pack 4spd). I also put in tubular upper control arms, boxed the lowers, and reinforced the original k-frame. I wasn't brave enough to try a whole tubular front end - maybe next time! |
|
LEGALIZE FREEDOM!
|
[Last Edit: FlashMan-7k]
[#23]
Originally Posted By slowkota1: With that CR... You wouldn't be running pump "e85", you'd be going through barrels of something like One Ethanol R. Thank god a 5gal pail of VP C23 lasts me a long time, as I only need it for a dedicated nitrous fuel cell lmao View Quote View All Quotes View All Quotes Originally Posted By slowkota1: Originally Posted By SlowTA: As a side note, given it was properly setup and tuned for it, would something like this run on e85? With that CR... You wouldn't be running pump "e85", you'd be going through barrels of something like One Ethanol R. Thank god a 5gal pail of VP C23 lasts me a long time, as I only need it for a dedicated nitrous fuel cell lmao Ahem. Maybe add some WW2 tech and a knock sensor. Good ole' water injection. High CR? Low octane? Good to go. |
|
|
[#24]
|
|
|
[#25]
Very nice.
|
|
|
[#26]
Oh that looks fun
|
|
|
[#27]
This thread is full of dollar signs and awesomeness.
|
|
|
[#28]
Mopar or no car!
|
|
|
[#29]
I'd take a 68 Cuda, but for some reason I've always wanted a nice, original 64-66 bubble back Cuda.
|
|
|
[#30]
|
|
Free LAV
|
[#31]
Originally Posted By FlashMan-7k: Ahem. Maybe add some WW2 tech and a knock sensor. Good ole' water injection. High CR? Low octane? Good to go. View Quote View All Quotes View All Quotes Originally Posted By FlashMan-7k: Originally Posted By slowkota1: Originally Posted By SlowTA: As a side note, given it was properly setup and tuned for it, would something like this run on e85? With that CR... You wouldn't be running pump "e85", you'd be going through barrels of something like One Ethanol R. Thank god a 5gal pail of VP C23 lasts me a long time, as I only need it for a dedicated nitrous fuel cell lmao Ahem. Maybe add some WW2 tech and a knock sensor. Good ole' water injection. High CR? Low octane? Good to go. You could totally run this thing on E85.....the problem is the VOLUME of E85 that would be required. Just not practical. *also, I have no interest in the pitfalls of E85, nor the lack of smelling really good race fuel exhaust......im still a 12y/o kid that way. |
|
Free LAV
|
[#32]
Cool car but sorry man Ethanol smells much better than race gas.
|
|
|
[#33]
|
|
Free LAV
|
[#34]
I think I got you all.
@RickFinsta @Snafu12 @32DOHC @gearjammer351 @GSAR426 @2sledgehammers April 28, 2024 |
|
Free LAV
|
[#35]
That thing sounds incredible. I see a lot of rubber on the 1/4s. How about a burnout video?
|
|
|
[#36]
Originally Posted By usp4u: I think I got you all. @RickFinsta @Snafu12 @32DOHC @gearjammer351 @GSAR426 @2sledgehammers https://www.youtube.com/watch?v=BEIn48V3JNQ View Quote |
|
|
[#37]
Damn, I'd love to take a spin in a NA ~1000HP car.
Awesome car, OP! |
|
|
[#38]
|
|
|
[#39]
That sounds awesome
|
|
|
[#40]
Nice ride and sounds good
|
|
|
[#41]
|
|
|
[#42]
Almost sounds like a Saturn V throttled back at max Q
|
|
For a people who are free, and who mean to remain so, a well-organized and armed militia is their best security.
Thomas Jefferson "He didnt punch anybody. He punched an idea." DrFrige |
[#43]
Originally Posted By usp4u: Shout out to @RickFinsta @Snafu12 As my W8 thread hit many roadblocks. It is still in play Thread here But something else happened lol. I drug home a 68 Barracuda Fastback, with a 434ci W9 deal that makes 976hp @ 8400. 14.5:1 deal running on Q16. At 3100lbs, on a 10.5 tire with 4.88s this thing is an animal. I love it. Tube K-frame, coilovers, Dana, spool, Mega awesome Weldon fuel system. And an uncut body. No tubs, no nothing. Just a cage that won't pass tech for the cars time. Car has gone 5.76@121 on footbrake, transbrake hasn't been used yet. Engine compartment, floors and trunk still with "EXCELLENT" factory paint. CA car with factory rustproofing. This thing is going to be a blast at the track, slow it down a bit and run 6.0 index. The fuel bill is going to suck though. https://www.ar15.com/media/mediaFiles/50735/20240426_200831_jpg-3198844.JPG View Quote Looks like a beast! That's a lot of power for a relatively small engine NA. Must spin it pretty hard. Wonder what valvespring life will be like? |
|
Don't worry scro...
|
[#44]
Originally Posted By dkm455: Looks like a beast! That's a lot of power for a relatively small engine NA. Must spin it pretty hard. Wonder what valvespring life will be like? View Quote Peak power @8400 These things routinely go about 5 years on valve springs, depending on how its driven/raced. PSI brand springs, about 740psi at full open. .800" lift |
|
Free LAV
|
[#45]
Originally Posted By usp4u: I think I got you all. @RickFinsta @Snafu12 @32DOHC @gearjammer351 @GSAR426 @2sledgehammers https://www.youtube.com/watch?v=BEIn48V3JNQ View Quote |
|
"Some people have issues. Sounds like he signed up for an entire subscription." ~Brohawk
Proud member of Team Ranstad. Arfcom St Jude Mafia 3 years Arfcom callsign: trenchfoot |
[Last Edit: fsjdw2]
[#46]
Is there "art" in building an engine that will do 700+ HP? or is it just "grown up Legos" with a bigger checkbook? (either this or private pilots license, ill fly one way or another...).
And what would I be looking at for a bill to build a 700+ HP v8, I'm partial to NA so "coyote and super charger with LOTS of boost" isnt ideal. |
|
|
[#47]
Originally Posted By usp4u: I think I got you all. @RickFinsta @Snafu12 @32DOHC @gearjammer351 @GSAR426 @2sledgehammers https://www.youtube.com/watch?v=BEIn48V3JNQ View Quote Fantastic! |
|
LEGALIZE FREEDOM!
|
[#48]
What’s the gas mileage like? Pass anything but a gas station?
|
|
|
[#49]
|
|
Everyone gets the main gun
|
[#50]
Originally Posted By usp4u: I think I got you all. @RickFinsta @Snafu12 @32DOHC @gearjammer351 @GSAR426 @2sledgehammers https://www.youtube.com/watch?v=BEIn48V3JNQ View Quote Attached File |
|
They want you disarmed, because they know they are guilty of things for which they should be shot.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.