I just got my Explorr 300 Universal. I installed a Silencerco ASR adaptor and will be using their ASR flash hiders on all my rifles. I'm confused by the website on how to determine what the minimum barrel length should be.

Taper Mount

EXPLORR® suppressors do not have minimum barrel length restrictions or constraints for rifle calibers. While longer barrels promote longer service life, there are no barrel length restrictions with this suppressor!

A2

Minimum barrel length :

   16" .308

   12.5" 6.8SPC

   8" 7.62x39

   8" 300BLK (super or subsonic)

   10.5" 5.56mm

What would my set up be?

The people who write the website pages haven’t done the best job if they are putting that information together.

Cold the suppressor will have no restrictions, but if you are running it to 1200f it would make sense to use the rating table as a guide to keep yourself in good shape.

The idea there is that all metals have strength at temperature curves and temporarily lose strength and hardness at higher temperatures- this is why you see metal getting forged when it is glowing- it is more plastic when glowing then at room temperature. It is at those high temperatures that damage can occur on the impractically short barrels.

This is kind of a more in depth analysis of what is going on with suppressors.

Argh! 224 & 300 sitting in jail. Oh well. It’s snowing and freezing out… hopefully when it gets warm again, these 2 get out of jail.

I know how you feel- we lost the weather and it impacted the style of our release videos for a couple optics we are bringing to market.