We will update this post to contain links to any updates to the FLIR RS Series Firmware.



FLIR RS Firmware Upgrade 01.17.14

 
 

https://flir.app.box.com/s/el20k4b56qei4lqqob3z
 

A Software update to further improve the performance of ThermoSight RS is now available on the FLIR






Web site.






With this update, a significant improvement in image performance is made possible by an upgrade to the






latest Tau 2.7.2 software. This update allows for three new processing modes that dramatically improve on-



screen detail and contrast. These updated levels of detail and contrast are further improved by tuning of the






LCD display to optimize image performance with additional gamma correction.






Based on user feedback, FLIR has updated the default ThermoSight Automatic Gain Control (AGC)






settings to provide the user three varying choices for a variety of conditions. These unique AGC settings are






pre-programmed as Scene Presets S1, S2 and S3. The Scene Preset controls are accessed via the advanced






tab of the menu (Setup/Advanced/Scene Presets). Users can obtain optimal image performance in a wide






range of conditions by toggling through these presets while in their unique environments.






Scene Preset 1 will now dedicate more contrast to the foreground object (target) and the background will






have less contrast, appearing darker in WH mode.






Scene Preset 3 will now provide the algorithm with more flexibility to generate an image with high contrast






in both the foreground and background targets. In S3, the background will appear lighter in WH mode.






Scene Preset 2 offers a balance between Preset 1 & 3 and is recommended for general use. Preset 2 will be a






factory default setting on all new production.






In addition to the scene presets, the following updates have been made to the InstAlert ® and screen






brightness settings:






InstAlert ® values have been improved and will now minimize over saturation of the "red hot” target.






Display brightness adjustments will now allow for a wider range of settings. This will improve use during






daylight shooting such as setting zero.






This free update is installed with a revised User (V1.04.02) GUI (PC only) and can be found here:






http://www.flir.com/hunting-outdoor/display/?id=53129



 

Just picked up RS64 from Optics Planet, looks like it has a firmware issue. All the links to the GUI and latest firmware are dead, anyone have it to share?

Does anyone have a link to the Flir RS software / firmware?    My RS-64 has apparantly bricked itself and none of the links are working.   Thanks!

No but I do have a link to revived decades old post on arfcom.