User Panel
User Panel
User Panel
TN, USA
|
Posted: 9/17/2022 12:38:50 PM EDT
[#1]
I picked mine up the other day and took it to the range to get it sighted in. I was using the Korean KCI 20-round metal AK mags that have been 100% in my SLR's. They did well with the KS47 aside from a couple of instances where the bolt would not pick up a round from the magazine. The bolt would simply slide right over the cartridge and not push it into battery. I could put rearward pressure on the magazine and it would work. After the round was loaded, the rest of the mag would fire normally without me putting pressure on the mag.
I did not try my Hungarian 20-round mags or the supplied Magpul 30 round mag. But if the Magpuls work well I may just get a bunch of their 20-rounders and use them exclusively with this gun.  
|
|
|
AZ, USA
|
Posted: 9/17/2022 1:23:29 PM EDT
[Last Edit: ihon]
[#2]
Quote HistoryOriginally Posted By JerDerv: Right on! I have an unmodified 16" faxon gunner in my KS47 that has been 100%. Zero issues with around1500 rounds through it. I remember when I was first putting it together I was debating dremeling out the feed ramps. I'm glad I left it alone, just figured I'd mention that. Thanks for the input. I'm going to try the Faxon barrel as is. I can always dremel the feed lips if there is a problem. Gibbs makes a side charger upper, but its almost $300. My complete PSA upper (w/ barrel, BCG, and hand guard) was $450 with tax and shipping. I do have a billet upper sitting around. So once my KS47 upper arrives, I can compare the two and see if it can be easily modified. |
|
|
MD, USA
|
Posted: 10/2/2022 11:01:17 AM EDT
[#3]
|
|
|
|
Posted: 11/19/2022 12:19:03 PM EDT
[Last Edit: themagikbullet]
[#4]
Finally fixed my vise set up and got angry enough to get my barrel nut off. Bare threads and had to have taken 200 ft/lb to break free
 With an adjustable gb and full time suppressed, what buffer weight and spring do you guys like for the platform? |
|
|
|
|
Posted: 11/24/2022 8:08:34 AM EDT
[#5]
I use a Sprinco Orange (Extra Extra Power Spring) and H3, and I’m still a little over gassed when shooting suppressed.
I’ve just learned to live with it. |
|
|
|
|
Posted: 11/24/2022 10:37:08 AM EDT
[#6]
Are you running adjustable gas? I have a variety of sprincos handy but I don't think I have an orange.
|
|
|
|
|
Posted: 1/23/2023 1:53:37 PM EDT
[#7]
Been using my secondhand KS-47 for a couple months now and loving it.
I'm sure it's been covered, but I'd rather not review 27pgs, will any ol' x39 AR bolt with the .125" bolt face depth work with the modified KS-47 carrier? I'm looking to grab a space .125" bolt for this and another x39 AR I have, but PSA only sells the bolt and carrier as a combo. I understand the carrier has been modified, but I'm not worried about the carrier so much as the bolt. Figure if the carrier is wrecked the entire gun is probably down, but I like to have a spare bolt and/or a bolt rebuild kit with me at matches or during a hunt. So, could I slap a Maxim .125" x39 bolt in the KS-47 carrier and be good to go? |
|
|
|
USA
|
Posted: 1/23/2023 1:55:06 PM EDT
[#8]
Quote HistoryOriginally Posted By towerofpower94: Been using my secondhand KS-47 for a couple months now and loving it. I'm sure it's been covered, but I'd rather not review 27pgs, will any ol' x39 AR bolt with the .125" bolt face depth work with the modified KS-47 carrier? I'm looking to grab a space .125" bolt for this and another x39 AR I have, but PSA only sells the bolt and carrier as a combo. I understand the carrier has been modified, but I'm not worried about the carrier so much as the bolt. Figure if the carrier is wrecked the entire gun is probably down, but I like to have a spare bolt and/or a bolt rebuild kit with me at matches or during a hunt. So, could I slap a Maxim .125" x39 bolt in the KS-47 carrier and be good to go? Not really, the psa bolt is cut for the ak mags. |
|
|
|
Posted: 1/23/2023 4:02:50 PM EDT
[#9]
Quote HistoryOriginally Posted By Dark_zero_x: Not really, the psa bolt is cut for the ak mags. Quote HistoryOriginally Posted By Dark_zero_x: Originally Posted By towerofpower94: Been using my secondhand KS-47 for a couple months now and loving it. I'm sure it's been covered, but I'd rather not review 27pgs, will any ol' x39 AR bolt with the .125" bolt face depth work with the modified KS-47 carrier? I'm looking to grab a space .125" bolt for this and another x39 AR I have, but PSA only sells the bolt and carrier as a combo. I understand the carrier has been modified, but I'm not worried about the carrier so much as the bolt. Figure if the carrier is wrecked the entire gun is probably down, but I like to have a spare bolt and/or a bolt rebuild kit with me at matches or during a hunt. So, could I slap a Maxim .125" x39 bolt in the KS-47 carrier and be good to go? Not really, the psa bolt is cut for the ak mags. Ah, thought it was just the carrier which had been worked on to clear the AK mag. Why doesn’t PSA just sell a bolt? The extractor is a standalone part you can purchase. |
|
|
|
AZ, USA
|
Posted: 1/23/2023 8:21:59 PM EDT
[#10]
I agree, a spare bolt covers the extractor and broken teeth problem. @PalmettoStateArmory any chance you can sell a complete bolt without the carrier? I would definitely be up for one.
|
|
|
UT, USA
|
Posted: 1/23/2023 8:31:27 PM EDT
[#11]
@palmettostatearmory
I put in a warranty claim on my KS-47. I had several light primer strikes on the first 50 rds fired. Its been a week and i have not heard from anyone. |
|
|
|
Posted: 1/24/2023 10:29:02 AM EDT
[#12]
Quote HistoryOriginally Posted By Dark_zero_x: Not really, the psa bolt is cut for the ak mags. Quote HistoryOriginally Posted By Dark_zero_x: Originally Posted By towerofpower94: Been using my secondhand KS-47 for a couple months now and loving it. I'm sure it's been covered, but I'd rather not review 27pgs, will any ol' x39 AR bolt with the .125" bolt face depth work with the modified KS-47 carrier? I'm looking to grab a space .125" bolt for this and another x39 AR I have, but PSA only sells the bolt and carrier as a combo. I understand the carrier has been modified, but I'm not worried about the carrier so much as the bolt. Figure if the carrier is wrecked the entire gun is probably down, but I like to have a spare bolt and/or a bolt rebuild kit with me at matches or during a hunt. So, could I slap a Maxim .125" x39 bolt in the KS-47 carrier and be good to go? Not really, the psa bolt is cut for the ak mags. Not sure if the discontinued LMT Enhanced bolt was also modified, but I swapped the LMT from my DI ARx39 into the KS-47 carrier and the KS-47 bolt into the standard DI AR carrier and both worked fine with stripping rounds from the AKM mag and the ARX39 mag. I didn't put a caliper to them, but the KS-47 bolt appears to be the same as a standard, .125" bolt face depth, 7.62x39 AR bolt. The standard DI AR carrier did not work with the KS-47, but that was expected as it does need to be cleared for the AKM mags. I picked up a Maxim .125" bolt face bolt as a spare along with a .136" face depth Grendel bolt. I'll be sure to test fire the .125" bolt in the KS-47 and DI ARx39 when it arrives. |
|
|
|
|
Posted: 1/24/2023 8:21:40 PM EDT
[#13]
Quote HistoryOriginally Posted By Copper_splicer: @palmettostatearmory I put in a warranty claim on my KS-47. I had several light primer strikes on the first 50 rds fired. Its been a week and i have not heard from anyone. Please PM me your order number and applicable info. I will get you taken care of. Thank you, Josiah |
|
|
|
|
Posted: 1/24/2023 8:22:44 PM EDT
[#14]
Quote HistoryOriginally Posted By ihon: I agree, a spare bolt covers the extractor and broken teeth problem. @PalmettoStateArmory any chance you can sell a complete bolt without the carrier? I would definitely be up for one. I will send the suggestion up the chain of command. Thank you, Josiah |
|
|
|
UT, USA
|
Posted: 1/24/2023 9:06:05 PM EDT
[#15]
Email sent. Thanks
|
|
|
|
Posted: 1/24/2023 9:07:25 PM EDT
[#16]
Quote HistoryOriginally Posted By PalmettoStateArmory: I will send the suggestion up the chain of command. Thank you, Josiah Quote HistoryOriginally Posted By PalmettoStateArmory: Originally Posted By ihon: I agree, a spare bolt covers the extractor and broken teeth problem. @PalmettoStateArmory any chance you can sell a complete bolt without the carrier? I would definitely be up for one. I will send the suggestion up the chain of command. Thank you, Josiah Seconded. Sensible spare part for the platform. |
|
|
|
|
Posted: 1/24/2023 9:52:28 PM EDT
[Last Edit: towerofpower94]
[#17]
Quote HistoryOriginally Posted By themagikbullet: Seconded. Sensible spare part for the platform. Quote HistoryOriginally Posted By themagikbullet: Originally Posted By PalmettoStateArmory: Originally Posted By ihon: I agree, a spare bolt covers the extractor and broken teeth problem. @PalmettoStateArmory any chance you can sell a complete bolt without the carrier? I would definitely be up for one. I will send the suggestion up the chain of command. Thank you, Josiah Seconded. Sensible spare part for the platform. Thirded. If the bolt carrier is busted the entire upper is probably toast and needs replaced, but even 5.56 shears bolt lugs from time to time. |
|
|
|
FL, USA
|
Posted: 2/3/2023 12:35:49 PM EDT
[#18]
@ PSA
When are you guys going to have the KS47 uppers back in stock again? I like to use them in many different builds! Thomas |
|
|
|
Posted: 2/4/2023 9:01:43 PM EDT
[#19]
Quote HistoryOriginally Posted By tawoodii: @ PSA When are you guys going to have the KS47 uppers back in stock again? I like to use them in many different builds! Thomas They are in stock now! https://palmettostatearmory.com/ks-47.html Thanks, Josiah |
|
|
|
|
Posted: 2/4/2023 9:31:19 PM EDT
[#20]
What about them KS47 bolts for sale as separate parts?
Thems available too? |
|
|
|
FL, USA
|
Posted: 2/4/2023 11:03:59 PM EDT
[#21]
I'm sorry Josiah/PSA I wasn't clear. I meant stripped KS47 uppers. I already have one of your built KS47 uppers and do not need another one. I like to use your KS47 stripped uppers in other builds with wider mag lowers.
Sorry for the confusion. Thomas. |
|
|
|
Posted: 2/18/2023 3:58:16 PM EDT
[#22]
Anyone swapped the enhanced FCG for a Geissele SSA or SSA-E?
Picked up another SSA during the G discounted sale and would like to swap it out, but wondering if anyone else has done it and had issues setting off primers in the steel cased ammo. |
|
|
|
USA
|
Posted: 2/19/2023 1:29:47 AM EDT
[#23]
I'm sure someone has addressed this already in 27 and counting pages of thread text, but without a search function it sure is hard as heck to parse quickly: can a KS47 upper receiver be used with a mil-spec bolt carrier for a custom build (i.e., NOT using AK magazines NOR AK-compatible 7.62 bolt)? It is my understanding that the PSA KS47 BCG simply has cuts along both sides' lower rail-riding areas, but I thought that was to accommodate the AK magazines. In a custom build for a different purpose that isn't using AK magazines, would the KS47 upper itself impede mobility of a mil-spec carrier in any other way? Is that why the PSA KS47 BCG has a weird trapezoidally shaped rear mass, or am I reading into this too much/missing something?
|
|
|
|
Posted: 2/23/2023 8:12:48 PM EDT
[#24]
Quote HistoryOriginally Posted By AKzgalore: I'm sure someone has addressed this already in 27 and counting pages of thread text, but without a search function it sure is hard as heck to parse quickly: can a KS47 upper receiver be used with a mil-spec bolt carrier for a custom build (i.e., NOT using AK magazines NOR AK-compatible 7.62 bolt)? It is my understanding that the PSA KS47 BCG simply has cuts along both sides' lower rail-riding areas, but I thought that was to accommodate the AK magazines. In a custom build for a different purpose that isn't using AK magazines, would the KS47 upper itself impede mobility of a mil-spec carrier in any other way? Is that why the PSA KS47 BCG has a weird trapezoidally shaped rear mass, or am I reading into this too much/missing something? Not sure I understood your question correctly, but I swapped my Gen 2 KS47 upper with bolt and carrier on to a standard AR lower and while the KS47 upper has a cut out for the standard BHO paddle, an ASC x39 mag wouldn’t lock into the magwell. Guessing the upper and/or carrier interferes with the STANAG mag feed lips. |
|
|
|
|
Posted: 3/2/2023 1:31:02 PM EDT
[#25]
Quote HistoryOriginally Posted By tawoodii: I'm sorry Josiah/PSA I wasn't clear. I meant stripped KS47 uppers. I already have one of your built KS47 uppers and do not need another one. I like to use your KS47 stripped uppers in other builds with wider mag lowers. Sorry for the confusion. Thomas. I have a request out for more KS47 stripped uppers. Thank you, Josiah |
|
|
|
|
Posted: 3/2/2023 10:49:33 PM EDT
[Last Edit: SIASL]
[#26]
@PalmettoStateArmory
Weird suggestion (I guess) - I would love to see a bolt-action upper that’ll pin onto KS47 lowers. I did a bolt-action a while back using a Uintah 300BO upper with one of your KS47 lowers with a Velocity trigger and liked it (a lot). This was back when shorty bolt-actions were just getting hot. My main negative was I had to modify AK 5.56 rocker mags to make it all work, which it did but made the feed lips a tad thin. Would love to see a no muss, no fuss option that could use readily available mags without modifications some day. Here’s a pic of that creation and my little girl at the range squeezing a round off.  Attached FileJust an idea… ETA: If by chance you might consider it a possibility, hit me up for a suggestion or two. There was one area concerning upper design I really (REALLY) felt needed attention. |
|
|
|
|
Posted: 3/3/2023 11:39:21 AM EDT
[#27]
Quote HistoryOriginally Posted By SIASL: @PalmettoStateArmory Weird suggestion (I guess) - I would love to see a bolt-action upper that’ll pin onto KS47 lowers. I did a bolt-action a while back using a Uintah 300BO upper with one of your KS47 lowers with a Velocity trigger and liked it (a lot). This was back when shorty bolt-actions were just getting hot. My main negative was I had to modify AK 5.56 rocker mags to make it all work, which it did but made the feed lips a tad thin. Would love to see a no muss, no fuss option that could use readily available mags without modifications some day. Here’s a pic of that creation and my little girl at the range squeezing a round off. https://www.ar15.com/media/mediaFiles/384478/C1F1E8F0-1364-442C-803E-29BAF8F7E60E_jpe-2731699.JPG Just an idea… ETA: If by chance you might consider it a possibility, hit me up for a suggestion or two. There was one area concerning upper design I really (REALLY) felt needed attention. Thank you for the suggestion. I will send it up the chain of command. Josiah |
|
|
|
GA, USA
|
Posted: 3/15/2023 9:56:39 PM EDT
[#28]
So I just got my form 1 approved on my 8.5” KS47, so I can step a stock on it and add a foregrip. So I went to add a magpul RVG with the little 1913 rail with mlok attachment screw pieces. I can’t mount the rail with the mlok screws because the screws hit the barrel. There isn’t enough gap between the mlok railed hand guard and the barrel. Is there any solution to this besides dremeling down the lengths of the magpul screws that came with the RVG?
|
|
|
|
Posted: 6/15/2023 12:23:37 PM EDT
[#29]
Quote HistoryOriginally Posted By themagikbullet: Seconded. Sensible spare part for the platform. Quote HistoryOriginally Posted By themagikbullet: Originally Posted By PalmettoStateArmory: Originally Posted By ihon: I agree, a spare bolt covers the extractor and broken teeth problem. @PalmettoStateArmory any chance you can sell a complete bolt without the carrier? I would definitely be up for one. I will send the suggestion up the chain of command. Thank you, Josiah Seconded. Sensible spare part for the platform. |
|
|
|
|
Posted: 6/16/2023 4:53:30 PM EDT
[#30]
Quote HistoryOriginally Posted By wayne1one: https://live.staticflickr.com/65535/52399702773_76a56f17e6_b.jpg IIIU5488 by 556 Channel (HD), on Flickr @wayne1one What barrel length is that? |
|
|
|
MD, USA
|
Posted: 6/19/2023 5:13:35 PM EDT
[#31]
Quote HistoryOriginally Posted By Lancelot: @wayne1one What barrel length is that? 10" |
|
|
NM, USA
|
Posted: 7/2/2023 12:25:40 AM EDT
[#32]
PSA, a couple of things:
1st, ditch the extractor o-ring. That's probably contributing to extractor breakage. It's a bad band-aid that came from treating a symptom rather than the disease in M4s. Think dropping a round into a pistol chamber then dropping the slide. I've seen ARs that malfunctioned due to excessive extractor tension. If the gas is right, one shouldn't even need the insert, only the spring. Along with the TC-E extractor, it should be much better. 2nd, look at the AR Performance 750XD and Titan bolts and extensions. I've wanted this in a KS-47 since day 1. Powerhouse PSA has done more extensive custom parts many times. This should be easy and could create lifetime bolts. Bonus points for incorporating dual ejectors like the new KAK bolt. Also, the lugs are already rounded, so might work fine with AK mags. Hell, if you really want the ultimate, go with Aermet alloy. These together could really cement the KS-47 as the ultimate 7.62x39 AR. Incorporate it all with the Jakl / KS-47 hybrid and BOOM! AWESOME!!! |
|
|
WA, USA
|
Posted: 7/5/2023 3:59:38 PM EDT
[#33]
I have a KS-47 pistol and stripped the top screw on my handguard and have been trying to get a simple screw for weeks now from PSA and there telling me I have to send my whole gun in for a tiny screw is there any way I can figure this out without sending it in for a simple screw? It’s been the run a round for weeks now.
|
|
|
|
Posted: 7/6/2023 2:13:19 PM EDT
[#34]
Quote HistoryOriginally Posted By Mdozer63: I have a KS-47 pistol and stripped the top screw on my handguard and have been trying to get a simple screw for weeks now from PSA and there telling me I have to send my whole gun in for a tiny screw is there any way I can figure this out without sending it in for a simple screw? It’s been the run a round for weeks now. I just replied to your PM. Thanks, Josiah |
|
|
|
WA, USA
|
Posted: 7/6/2023 2:59:48 PM EDT
[#35]
Thank you very much!
|
|
|
WA, USA
|
Posted: 9/16/2023 8:24:05 AM EDT
[Last Edit: JerDerv]
[#36]
Quote HistoryOriginally Posted By towerofpower94: What about them KS47 bolts for sale as separate parts? Thems available too? KAK has a solution now specifically for ks47 https://kakindustry.com/kak-enhanced-ks47-bolt-7-62x39-dual-ejectors-nitride/ Edit: that link is dead https://kakindustry.com/kak-industry-ks47-enhanced-dual-ejector-bolt-7-62x39-nitride/ |
|
|
|
Posted: 9/16/2023 2:29:06 PM EDT
[#37]
Quote HistoryOriginally Posted By JerDerv: KAK has a solution now specifically for ks47 https://kakindustry.com/kak-enhanced-ks47-bolt-7-62x39-dual-ejectors-nitride/ Pretty bizarre concept but if it works more power to them. 
|
|
|
|
|
Posted: 9/17/2023 8:31:51 AM EDT
[Last Edit: towerofpower94]
[#38]
Quote HistoryOriginally Posted By panzersergeant: Pretty bizarre concept but if it works more power to them. https://cdn11.bigcommerce.com/s-pompwzlgb8/images/stencil/1280x1280/products/2372/4858/BCG_15__97745.1694798961.png?c=1 Quote HistoryOriginally Posted By panzersergeant: Originally Posted By JerDerv: KAK has a solution now specifically for ks47 https://kakindustry.com/kak-enhanced-ks47-bolt-7-62x39-dual-ejectors-nitride/ Pretty bizarre concept but if it works more power to them. https://cdn11.bigcommerce.com/s-pompwzlgb8/images/stencil/1280x1280/products/2372/4858/BCG_15__97745.1694798961.png?c=1 There are a couple different dual ejector bolts out there, but I think they’re mostly in AR10/.308 sized bolts, no? What problem is the KAK bolt trying to solve? |
|
|
|
VA, USA
|
Posted: 11/20/2023 9:50:30 PM EDT
[Last Edit: dragpo]
[#39]
Hi all...Will take some time to dig through this thread as I'm sure this has been asked/answered
I'm running a Gen 2 KS-47, 16" barrel, suppressed. It functions just fine...however...when breaking it down to clean last night I heard rattling in the buffer tube and it appears the plastic bottom of the buffer had exploded into pieces back there. Any thoughts? Seems like it may be impacting the back of the tube violently. Would a heaver spring prevent it from smacking so hard? Apologies if this has been discussed already Thank you! |
|
|
|
Posted: 11/21/2023 9:28:19 AM EDT
[#40]
Quote HistoryOriginally Posted By dragpo: Hi all...Will take some time to dig through this thread as I'm sure this has been asked/answered I'm running a Gen 2 KS-47, 16" barrel, suppressed. It functions just fine...however...when breaking it down to clean last night I heard rattling in the buffer tube and it appears the plastic bottom of the buffer had exploded into pieces back there. Any thoughts? Seems like it may be impacting the back of the tube violently. Would a heaver spring prevent it from smacking so hard? Apologies if this has been discussed already Thank you! I had an adjustable gas block installed when I had my 51T suppressor mount pinned and welded on. Depending on the can you're using, you might need to increase the buffer weight and/or spring strength to slow down the bolt carrier. |
|
|
|
VA, USA
|
Posted: 11/21/2023 12:22:15 PM EDT
[#41]
Quote HistoryOriginally Posted By towerofpower94: I had an adjustable gas block installed when I had my 51T suppressor mount pinned and welded on. Depending on the can you're using, you might need to increase the buffer weight and/or spring strength to slow down the bolt carrier. Thanks I'll start with the spring to keep it simple. I think I have an H3 buffer in there. Assuming any AR10 heavy spring would work |
|
|
VA, USA
|
Posted: 11/26/2023 12:21:03 PM EDT
[#42]
I just noticed primer marks on unfired rounds after being loaded and ejected. Anyone else having this? Can upload a pic later, just looks like a light primer strike but from only being sent into chamber. Thankfully didn’t fire but still seems sketch
|
|
|
|
Posted: 11/26/2023 12:45:27 PM EDT
[Last Edit: towerofpower94]
[#43]
Quote HistoryOriginally Posted By dragpo: I just noticed primer marks on unfired rounds after being loaded and ejected. Anyone else having this? Can upload a pic later, just looks like a light primer strike but from only being sent into chamber. Thankfully didn’t fire but still seems sketch I’ve seen that in a number of different t firearms that don’t have a spring loaded firing pin, to include .223 ARs. Never been an issue since the firing pin doesn’t weigh much and doesn’t have enough energy to actually detonate a primer just by contacting it upon chambering. Could also be that PSA uses a slightly longer firing pin to ensure consistent ignition of the notoriously hard commbloc primers in steel cased ammo. I had to put one in my first x39 AR years ago to get reliable ignition. |
|
|
|
VA, USA
|
Posted: 11/26/2023 2:14:12 PM EDT
[#44]
Thank you!
|
|
|
WV, USA
|
Posted: 12/4/2023 11:14:01 PM EDT
[#45]
Wife just ordered a KS-47 today!! Email came in that it was back in stock, 16 inch barrel, 13.5 m-lok
Great wife. |
|
|
KS, USA
|
Posted: 1/5/2024 12:25:44 PM EDT
[#46]
Anyone tried BCM Mod3 pistol grip on the KS47? wondering if it will fill the slight gap between the grip and trigger guard.
|
|
|
AZ, USA
|
Posted: 1/18/2024 4:26:39 AM EDT
[Last Edit: AZ_Mike]
[#47]
Posted in wrong place
|
|
|
|
Posted: 1/23/2024 11:07:50 PM EDT
[#48]
I have a 16” KS-47 and love it and it’s mak8ng me want a shorter version. I now want to buy a pistol version in 8.5” upper or 10.5” upper. Which upper would you buy and why?
|
|
|
|
|
Posted: 1/24/2024 8:35:35 AM EDT
[#49]
Quote HistoryOriginally Posted By scottMO: I have a 16” KS-47 and love it and it’s mak8ng me want a shorter version. I now want to buy a pistol version in 8.5” upper or 10.5” upper. Which upper would you buy and why? 8.5" if going suppressed. |
|
|
|
LA, USA
|
Posted: 2/6/2024 1:00:57 PM EDT
[Last Edit: NOLAGT]
[#50]
Would anyone happen to know how much the PSA upper receiver weighs? I am wondering how it compares to the Gibbz side charger because im trying to shed some weight off my 10.5" sbr gen2 setup. I don't think I want to take my stock 10.5" upper apart in case the new upper didn't work out so I can keep the warranty on the PSA uper. So im looking at building one using a faxon 10" barrel with an adj gas block and lighter handguard setup.
What other uppers work other than Gibbz and billet rifle system? |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
