User Panel
User Panel
User Panel
|
Posted: 10/19/2006 12:37:56 PM EDT
[#1]
I'm guessing you don't care for it? |
|||
|
|
|
Posted: 10/19/2006 5:01:50 PM EDT
[#2]
Just giving you a hard time. It's not my thing but if it works....
|
|
|
|
AR, USA
|
Posted: 10/22/2006 9:11:17 PM EDT
[Last Edit: sarge38624]
[#3]
A few of my 1911's.
The first is my Kimber TLE/RL Pro  Next is my Kimber Ultra Carry II  And last is my favorite, this is my Colt that I had built in 1994. 
|
|
|
|
Posted: 10/23/2006 3:41:56 PM EDT
[Last Edit: ISED8U]
[#4]
I reshaped and refinished with a rougher finish in matte black. This was a much better finish. I've been playing around looking for the perfect finish and I believe this is it. It's much better than the glossy finish I had on it before.
   Maxx I hope you like it better. 
|
|
|
|
|
Posted: 10/29/2006 11:08:02 PM EDT
[#5]
Form 1 finally arrived...
 
|
|
|
|
|
Posted: 10/29/2006 11:23:20 PM EDT
[#6]
Took it long enough! Looks good! |
||
|
|
|
Posted: 10/31/2006 6:10:21 AM EDT
[#7]
Here are my 2 1911's. They are both Springfields. Top is a USGI that I have worked on for around 2 years. Finally got it where I want it. Second is a Loaded I picked up used for a steal.
|
|
|
|
USA
|
Posted: 11/7/2006 9:37:19 PM EDT
[#8]
can anyone tell me wher a goog range or place to shoot otr\rplink is aroind hamburg or crossett area--new to the area
|
|
|
|
Posted: 11/10/2006 8:35:59 AM EDT
[#9]
Who did you use for your engraving? |
||
|
|
AR, USA
|
Posted: 11/24/2006 6:21:54 PM EDT
[#10]
Well I guess its my turn again.
Here is my CZ 40P. One of only 1500 made. 
|
|
|
AR, USA
|
Posted: 11/28/2006 5:45:08 PM EDT
[Last Edit: CIB]
[#11]
I'm bored, wet miserable weather out today. I was messing around with my Saiga 12 and my new AGP Arms 10 rd. mags.
|
|
|
AR, USA
|
Posted: 12/4/2006 9:59:45 AM EDT
[Last Edit: YaMaMa]
[#12]
I've posted most of these photos, just not here.
     My AR-15 has a new G-27 grip and a 6 point stock. I also have a Rem 700 30-06. And a CZ85 that is for christmas that i picked out but mom and dad paid for. ETA: Pic info... 9mm AR ASA upper with Mega lower, Ruger MKIII 5 1/2", Kahr PM9, Norinco SKS. |
|
|
|
Posted: 1/4/2007 1:06:41 AM EDT
[Last Edit: cowboy7242001]
[#13]
Must be my turn
        
|
|
|
|
AR, USA
|
Posted: 1/22/2007 6:31:13 PM EDT
[Last Edit: CIB]
[#14]
Another project finished up, the BBT showed up today with a package from Gemtech.
|
|
|
VA, USA
|
Posted: 2/11/2007 3:00:29 PM EDT
[Last Edit: voodochild]
[#15]
So technically I am not living in Arkansas but own property there so I am going to post my stuff anyways.
  
|
|
|
|
Posted: 2/21/2007 4:37:32 PM EDT
[#16]
Not new, but I added about $500 in new parts:
Thanks to Decoy for the use of his wrench! |
|
|
|
|
Posted: 2/22/2007 8:11:36 PM EDT
[#17]
WTF, guess I should contribute.
Call me simple. Have a lot more, but I guess we're all about fighting weapons here. My main combat weapon. The finish held up well on all of my 4 trips to the sandbox and time back in the 'Nam   Ok Ok here's the real stuff. Glock22  mega receivers M4  I have a Shark brake from Tromix at home waiting to install on it, and a Buis on the way our lazy ass mod. Gratuitous shirt pic 
|
|
|
|
AR, USA
|
Posted: 2/24/2007 2:04:58 AM EDT
[#18]
My new family member....
|
|
|
|
Posted: 2/25/2007 4:26:30 PM EDT
[Last Edit: glock23c]
[#19]
CMP Garand, all Springfield Armory parts.
$295 + shipping from CMP - SN shows that it was made in June 1941 $110 Laminated Stock from Boyds Garand Clips 140 rounds of CMP 30/06 Total ~$500  Link to Larger Image |
|
|
|
|
Posted: 2/25/2007 4:36:46 PM EDT
[#20]
 OMG, you deserve to have it used on you
|
||
|
|
|
Posted: 2/25/2007 5:03:00 PM EDT
[Last Edit: glock23c]
[#21]
The $295 CMP Garands don't have stocks, they are just the metal. I ordered the stock separately. |
|||
|
|
|
Posted: 2/25/2007 5:48:30 PM EDT
[#22]
|
||||
|
|
VA, USA
|
Posted: 2/26/2007 8:20:47 PM EDT
[#23]
|
|
|
|
Posted: 2/26/2007 8:43:02 PM EDT
[#24]
Guess I will throw another one up.
Funny thing is I have even more mags laying around here. |
|
|
|
|
Posted: 3/8/2007 9:25:29 PM EDT
[Last Edit: cowboy7242001]
[#25]
More toys. Some are slighty the same.
   
|
|
|
|
|
Posted: 3/8/2007 10:31:33 PM EDT
[Last Edit: cowboy7242001]
[#26]
Well damm Cowboy, now I gotta get a Family pic of my AR's to go with my Glock Family pic. Great looking Rifles.
|
||
|
|
AR, USA
|
Posted: 3/10/2007 1:26:10 AM EDT
[#27]
Updated pic with Ghost Rings....
 
|
|
|
|
Posted: 3/12/2007 11:11:50 AM EDT
[#28]
Thanks to akubli for the reciever:
|
|
|
|
|
Posted: 3/12/2007 11:20:14 AM EDT
[#29]
Damn, thats a hell of a lot better than it would have looked if I had done anything with it. |
|
|
|
|
Posted: 3/12/2007 11:26:07 AM EDT
[#30]
That is awful purdy. 10/22s are in my top 5 favorite weapons...maybe even top 3.
|
|
|
|
|
Posted: 3/12/2007 11:43:34 AM EDT
[Last Edit: cajunboy]
[#31]
Thanks guys. Yea, I told Aaron I was gonna wait until the summer, but once I saw this stock, I could not wait that long.
I am packing up now and headed to the range.
|
|
|
|
|
Posted: 3/12/2007 12:35:53 PM EDT
[#32]
I have that problem....some lowers I bought a few months ago "just in case" turned into a Colt M4 and 70% of a SPR If the other 30% wasn't the expensive part It'd probably be done already
|
||
|
|
|
Posted: 3/12/2007 1:03:57 PM EDT
[#33]
What are ya missing from it, Im working on my fake SPR and have a barrel, gas tube, Magpul PRS stock and BCG so far(about 30% to your 70) |
|||
|
|
|
Posted: 3/12/2007 1:31:02 PM EDT
[#34]
I've got everything but the upper, rails and sights. That would make it 100% functional ....but I would still need glass and the Ops can for it to be 100% complete.
I'm looking for a Larue or Vltor upper receiver...but its hard to find them with rifle ramps instead of M4 ramps. Might have to settle for a Colt or LMT takeoff. Rails will be Larue or KAC and sights will hopefully be KAC, but probably Troy or Sampson. Don't have a clue about a scope yet...Nightforce if I can swing it, Leupy if I can't. |
|
|
|
|
Posted: 3/12/2007 1:32:40 PM EDT
[#35]
The cheap bastard in me says I should just go with iron sights , what lower did you use for it.
|
||
|
|
|
Posted: 3/12/2007 2:04:23 PM EDT
[#36]
RRA lower I buit and a A1 stock. I may replace it with a UBR when it comes out, but I doubt it. A1 fits me pretty good.
|
|
|
|
|
Posted: 3/14/2007 7:33:27 PM EDT
[#37]
I uess Im going to start adding some pictures of mine now. This is what Ive transfered in the last week. A 10/22 with a 16.25" threaded barrel, a 10/22 with a folding stock and cheap red dot, and a stripped lower which needs to be engraved for my SBR project. Upper and FF handgaurd are in the mail right now. The second picture is what few parts I have together for my SPR Project so far, unfortunatly not very many yet.
 
|
|
|
|
AR, USA
|
Posted: 3/21/2007 1:01:19 AM EDT
[#38]
|
|
|
|
Posted: 3/31/2007 2:13:32 PM EDT
[#39]
Here is last nights build. It is a Sundevil lower with a DPMS LPK in it and an olympic upper w/10.5" barrel and Specter length YHM FF on it. It has a Socom mag block and Sten mags that I refinished a few of. Overall it is a fun gun, as soon as the F1 goes throught it will get a magpul CTR and a VFG on it. I am also going to top it with either an eotech 512 or 552.
  
|
|
|
|
AR, USA
|
Posted: 4/7/2007 9:04:19 PM EDT
[#41]
|
|
|
AR, USA
|
Posted: 4/8/2007 1:08:15 AM EDT
[Last Edit: gixxer_sixxer]
[#42]
My latest two projects are DONE!!!!!! finially:
SW33 modded to take Ar15 magazines (100% reliable) ( and mags are 88% cheaper )and a 51 pistol (that needs to be SBR'ed as soon as possible lol.) 
|
|
|
|
Posted: 4/12/2007 7:07:47 PM EDT
[#43]
Well, my paperwork is back:
And I got a scope sighted in on my 10/22 |
|
|
|
|
Posted: 4/17/2007 12:40:57 AM EDT
[Last Edit: Dusty_C]
[#44]
  2 of my newest additions. Ok so the AR ain't new. It's just a moderate rework of an old one, stock, fh, buis, paint. Just bought a p-22 also but it's about to go on the sale/trade block. |
|
|
|
|
Posted: 5/19/2007 4:53:23 PM EDT
[#45]
Here are some of my latest toys:
Kel Tec P3-AT: 4 inch barrel for one of my Buckmarks Carver and Cmore for my G24 A completed pic of my 24" AR |
|
|
|
|
Posted: 5/30/2007 12:06:15 AM EDT
[#46]
Got a new to me Sig
|
|
|
|
AR, USA
|
Posted: 6/6/2007 10:39:29 AM EDT
[#47]
Hi guys and gals, heres a few of mine,
My 20'' "spare parts" build, built from leftover parts from the 2 below. http://i192.photobucket.com/albums/z68/eqmuffler/AR15004.jpg http://i192.photobucket.com/albums/z68/eqmuffler/AR15003.jpg My 16" build, http://i192.photobucket.com/albums/z68/eqmuffler/AR15002.jpg http://i192.photobucket.com/albums/z68/eqmuffler/AR15001.jpg My 20" build, http://i192.photobucket.com/albums/z68/eqmuffler/birthday002.jpg http://i192.photobucket.com/albums/z68/eqmuffler/birthday001.jpg and my cheap ol 1911, http://i192.photobucket.com/albums/z68/eqmuffler/1911-4.jpg http://i192.photobucket.com/albums/z68/eqmuffler/1911-2.jpg |
|
|
AR, USA
|
Posted: 6/6/2007 6:15:05 PM EDT
[Last Edit: LDAguy]
[#48]
|
|
|
|
Posted: 6/11/2007 11:28:51 PM EDT
[#49]
Picked up a new toy today at Gander for........$300.
  |
|
|
|
AR, USA
|
Posted: 6/12/2007 9:21:11 PM EDT
[#50]
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
