User Panel
Posted: 11/26/2023 10:50:54 AM EDT
I lose about 10% of my brass at the range. 5.56, .300 Blackout, and 6.5mm Grendel. If it goes over the red line, we're not allowed to retrieve it. I've lost maybe 100 rounds worth of brass this year, which might cost me a whopping $15 to replace. When I start shooting on a tactical range though, I expect to lose all of my brass. They told me to expect to shoot 200 to 300 rounds during a training session and I'm planning to use it once a month. That would mean a couple hundred a year in lost brass.
I'm not reloading now but I will be in the next year or so. I'm looking at brass catchers and they're pretty cheap but I know nothing about actually using them, or even if I should. The fact that I don't see anyone here using them leads me to believe it's not a good idea. Help me out, please. |
|
"Call a magazine a clip again. I dare you, I double dare you mother******, call a magazine a clip one more ******* time!"
-- Jules Winnfield |
[#1]
I use them for 300 BLK and 458S.
Everything else I usually don't even bother picking up. 9mm and 5.56 brass is dirt cheap. |
|
|
[#2]
Originally Posted By Cascade-Dude: I lose about 10% of my brass at the range. 5.56, .300 Blackout, and 6.5mm Grendel. If it goes over the red line, we're not allowed to retrieve it. I've lost maybe 100 rounds worth of brass this year, which might cost me a whopping $15 to replace. When I start shooting on a tactical range though, I expect to lose all of my brass. They told me to expect to shoot 200 to 300 rounds during a training session and I'm planning to use it once a month. That would mean a couple hundred a year in lost brass. I'm not reloading now but I will be in the next year or so. I'm looking at brass catchers and they're pretty cheap but I know nothing about actually using them, or even if I should. The fact that I don't see anyone here using them leads me to believe it's not a good idea. Help me out, please. View Quote On a tactical training course it’ll likely aide you in malfunction drills. Occasionally on a stationary range the brass won’t fall down into the basket causing stovepipes. Not a big concern but it’s possible. |
|
RIP Joker1
Lilly, countless other pups along with their new families and myself are forever thankful for your dedication |
[#3]
|
|
|
[#4]
|
|
|
[#5]
Originally Posted By RottenPumpkin: Brass goat is amazing. I use it on all my ARs without any issues. https://i.postimg.cc/ncCQpvPD/20231019-152833.jpg View Quote |
|
|
[#6]
Originally Posted By Mr_Maim: Does the brass catcher "magazine" come off pretty easily? I've been looking at one of those for my 300BO rifle. View Quote View All Quotes View All Quotes Originally Posted By Mr_Maim: Originally Posted By RottenPumpkin: Brass goat is amazing. I use it on all my ARs without any issues. https://i.postimg.cc/ncCQpvPD/20231019-152833.jpg It doesn't come off by accident, have to push the plastic lever catch to get it to release and it comes off easy enough. I put the fuzzy side of self sticking velcro on the deflector to minimize denting the brass. The sponge rubber type works but sometimes you get stovepipes. Also Brassgoat is fine for mil-spec sized lowers, I have a couple that are not and it does not clip on as well so end up using a Caldwell brass catcher on those. |
|
|
[#7]
Originally Posted By maximumtorque: It doesn't come off by accident, have to push the plastic lever catch to get it to release and it comes off easy enough. I put the fuzzy side of self sticking velcro on the deflector to minimize denting the brass. The sponge rubber type works but sometimes you get stovepipes. Also Brassgoat is fine for mil-spec sized lowers, I have a couple that are not and it does not clip on as well so end up using a Caldwell brass catcher on those. View Quote View All Quotes View All Quotes Originally Posted By maximumtorque: Originally Posted By Mr_Maim: Originally Posted By RottenPumpkin: Brass goat is amazing. I use it on all my ARs without any issues. https://i.postimg.cc/ncCQpvPD/20231019-152833.jpg It doesn't come off by accident, have to push the plastic lever catch to get it to release and it comes off easy enough. I put the fuzzy side of self sticking velcro on the deflector to minimize denting the brass. The sponge rubber type works but sometimes you get stovepipes. Also Brassgoat is fine for mil-spec sized lowers, I have a couple that are not and it does not clip on as well so end up using a Caldwell brass catcher on those. Added to the Christmas list. |
|
|
[#8]
I have the Brass Goat. Brass catchers are a pain in the ass, but this one works well, is easy to put on and remove, easy to empty, and doesn't require any additional hardware on the rifle. It's about as good as it gets, I think.
|
|
|
[#9]
Originally Posted By Cascade-Dude: I lose about 10% of my brass at the range. 5.56, .300 Blackout, and 6.5mm Grendel. If it goes over the red line, we're not allowed to retrieve it. I've lost maybe 100 rounds worth of brass this year, which might cost me a whopping $15 to replace. When I start shooting on a tactical range though, I expect to lose all of my brass. They told me to expect to shoot 200 to 300 rounds during a training session and I'm planning to use it once a month. That would mean a couple hundred a year in lost brass. I'm not reloading now but I will be in the next year or so. I'm looking at brass catchers and they're pretty cheap but I know nothing about actually using them, or even if I should. The fact that I don't see anyone here using them leads me to believe it's not a good idea. Help me out, please. View Quote What is this an indoor range? If it's an outdoor range be you bet I'm going to get my brass during cease fire and checking targets |
|
|
[#10]
|
|
"Call a magazine a clip again. I dare you, I double dare you mother******, call a magazine a clip one more ******* time!"
-- Jules Winnfield |
[Last Edit: dmac7979]
[#12]
Originally Posted By Cascade-Dude: I picked up a Caldwell picatinny rail-mount brass catcher. I used it at the range yesterday and it works great. The zipper on the bottom empties it very quickly. It also put one brass nicely on the bench when I forgot to zip it up after emptying. I also learned not to set the rifle down on its left side, as this tends to dump the brass into the open bolt. I was amazed to discover that seven empty cases will fit into an AR-15 breech. Other than that, it never got in my way and didn't really complicate anything after I made those two mistakes. I'm going to get another mounting bracket for my AR pistol. Once the rail mount is installed, the basket assembly pulls right off and slides right back on. The adjustment rails allow the mount to be independent of the basket position, so I was able to use it on an empty rail section without having to move anything, and then position the basket where it needs to be; one end on the barrel nut and the other on the forward assist housing. I can't attest to its durability but I like the design, it works great, and it's easy to use. I'm going to get a Goat for my wife, though. She's a lefty using a right-hand AR and the Caldwell would never work for her. I think the Goat's slimness will make it more doable. Time will tell, though. Thanks for the help! https://www.caldwellshooting.com/dw/image/v2/BCNX_PRD/on/demandware.static/-/Sites-caldwell-master/default/dw647facf6/images/530143/original/530143-Caldwell-AR-15-Pic-Rail-Brass-Catcher-Full.jpeg?sw=2000&sh=1128 View Quote I've had the Caldwell pic mount one for some time, dollar for dollar its a great value. My only complaint is I wish they would figure out a way for stronger detents. On something that has low recoil (like an ar15) it works great, my AR10 shucks it off eventually though. Other than the occasional case sticking to the mesh from it not being too heat resistant, it just plain works. It also works great on my B&T 45 APC, I don't like losing 45 Auto brass. |
|
We have to protect our phoney baloney jobs here, gentlemen! We must do something about this immediately! Immediately! Immediately! Harrumph! Harrumph! Harrumph!
|
[#13]
Originally Posted By dmac7979: I've had the Caldwell pic mount one for some time, dollar for dollar its a great value. My only complaint is I wish they would figure out a way for stronger detents. On something that has low recoil (like an ar15) it works great, my AR10 shucks it off eventually though. Other than the occasional case sticking to the mesh from it not being too heat resistant, it just plain works. It also works great on my B&T 45 APC, I don't like losing 45 Auto brass. View Quote Thanks for the feedback. I'll be using it on a .300 BO pistol too. It has quite a bit more kick, so I'll keep an eye out. Good heads-up! Thanks! The guy two lanes down from me at the range yesterday rained down .45 ACP brass all over the place, then left without sweeping it up. There must have been a hundred of them. If that happens again, I'll snag them for you. |
|
"Call a magazine a clip again. I dare you, I double dare you mother******, call a magazine a clip one more ******* time!"
-- Jules Winnfield |
[#15]
I use the brass goat
|
|
|
[#16]
brass goat as well. Works great.
|
|
|
[#17]
Brass Goat for me.
Brass Goat AR Brass Catcher (BG15) I use it on on the range during load testing. I need to inspect that brass for pressure signs. I shoot one load at a time. And I rarely use the supplied plastic bottom brass receptacle to capture the brass. I mainly let them drop into a hat so I can inspect every round fired right away. |
|
|
[#18]
Originally Posted By TargetShooter2: I just made 3 of them , going on a PD hunt in June so wanted something to catch the brass instead of having to pick them up off of the ground . I used pvc pipe , 1/8 tig rod, inch od aluminum bar stock 1 inch scope rings to mount with . the bags was laundry bags from walmart for .99 ,, they all work out great https://i.imgur.com/AO2wnMh.jpg https://i.imgur.com/JQkvlsH.jpg https://i.imgur.com/I5L8X8i.jpg View Quote Nicely done! |
|
"Call a magazine a clip again. I dare you, I double dare you mother******, call a magazine a clip one more ******* time!"
-- Jules Winnfield |
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.