AR15.Com Archives
 Heil furnace repair
ColdSteel223  [Team Member]
2/26/2012 4:59:31 PM
I have a Heil DC90 Model #NTGMO75 EGAZ SN# L973061227.

The bottom burner (it has 3) would not light. I pulled out the burner assy and the "flame end" was all rusted up. The pilot light gas was not making it to the lowest burner. I cleaned out the channel between the burners and reassembled the unit. Problem solved, all 3 burners now ignite.

My problem/question is the round metal burner "orifices" were also very rusty and had some cracks between the holes in them. I found this replacement part,

Link to replacement

This is a BRAND NEW OEM ICP/Heil/Tempstar Furnace 3 Burner Burner Assembly with part # 1173067. This assembly is 10" wide each burner is 5" long.

Manufacturer: N/A
SKU: MIS05 050
MPN: MIS05050


It looks like what I need, could any of you real deal furnace repair guys verify that is the part that I need?


Thanks in advance
Adirondack1  [Team Member]
2/26/2012 5:24:20 PM
<Please keep the General Discussion comments and posts in GD. ––tbk1>
ColdSteel223  [Team Member]
2/26/2012 7:08:44 PM
Dude, not very funny.
fxntime  [Team Member]
2/26/2012 7:11:48 PM
If you sourced it according to model number, you'll get the right part or assembly.

You have propane as your fuel?
ColdSteel223  [Team Member]
2/26/2012 8:08:34 PM
Yes on the propane.

I used the generic Heil DC90 model on the outside of the unit. I haven't had any luck looking up the actual model number. That is why I am asking for some help.
ColdSteel223  [Team Member]
4/13/2012 6:22:54 PM
Bump.
ZW17  [Moderator]
4/13/2012 11:11:15 PM
My Heil supplier is closed on weekends but I can call and verify on Monday for you.
ColdSteel223  [Team Member]
4/18/2012 6:15:02 PM
BTT for info.

Thanks