I don't have one of the ones offered by cdnn but I do have a mk3 prototype and I have a geiselle sea in it and it works great.
My upper is the high profile dpms variety. I don't know if they changed at all. I believe they use dpms pattern barrels and barrel nuts.
I would love to answer your questions but have not laid hands on one. With any luck, I'll go back to work and have one soon.
Dave N
Originally Posted By BB:
Is it forged or billet; what alloy?
What gas system?
Is the barrel nut (or any other part, for that matter) proprietary?
What height receiver is it, what rails other than CMMG will mount up flush?
Will it work with aftermarket FCGs (unconfirmed rumor is geissele dont work)?
What pattern is the barrel extension/bolt, ArmaLite, SR25 or ?
Is the receiver extension milspec or commercial?
Billet 6061T6 is used for both upper and lower receivers.
Standard gas at the mid length.
The barrel nut/rail system is exclusive to us.
Most FCG should work, the Geissele triggers should work fine.
All the parts LR308 pattern, so primarily SR25 compatible, the uppers are the old DPMS height.
The receiver extension is the mil-spec diameter.
Thank you! So if I wanted to swap the rail out for a DD 7.62 rail/barrel nut that should work right? I would want a rifle-length rail system.
Originally Posted By BB:
Thank you! So if I wanted to swap the rail out for a DD 7.62 rail/barrel nut that should work right? I would want a rifle-length rail system.
I'm also curious about this. Wanted to do a LaRue setup.
