AR15.Com Archives
 Looking for the best fake can/flash hider for my Draco
762x39nut  [Member]
6/26/2011 7:34:01 PM
I'm putting an underfolder on my Draco,and I'm looking for places that sell cans for the 762 with 14L.H. threads.To make up the balance of barrel length.
Seen alot of flash hiders, but like the can look better.
Any out there I missed?
Thanks in advance.
SeanK1ng  [Member]
6/26/2011 9:03:09 PM
Originally Posted By 762x39nut:
I'm putting an underfolder on my Draco,and I'm looking for places that sell cans for the 762 with 14L.H. threads.To make up the balance of barrel length.
Seen alot of flash hiders, but like the can look better.
Any out there I missed?
Thanks in advance.


Don't know if you've seen this one:

http://www.redstararms.com/index1.html?c1.html&1

***EDIT*** Site won't let me direct link....it's in the AK47 section....items 25-30 of 36 items total.

Sorry for any confusion.
Landoman  [Member]
6/27/2011 2:30:23 PM
http://www.tacticalaccessories.com/products/viewproduct.php?id_product=531
AEnemaBay  [Team Member]
6/27/2011 3:25:46 PM
Originally Posted By Landoman:
http://www.tacticalaccessories.com/products/viewproduct.php?id_product=531


$90?! Damn, screw that noise.
AEnemaBay  [Team Member]
6/27/2011 3:29:08 PM
This is probably the most I'd spend unless I was going for a 100% replica of an actual military arm:

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=238294284
Veeto  [Member]
7/9/2011 12:42:50 PM
not a vendor but these are available too fake cans vto
762x39nut  [Member]
7/10/2011 7:55:23 PM
Veeto, That's the one!!! Thank you!
BillythePoet  [Team Member]
7/13/2011 3:41:17 PM
Is there an easy way to attach an aluminum device to the muzzle for ATF length compliance for a rifle?
762x39nut  [Member]
7/13/2011 7:49:59 PM
Blind pinned/welded?
3500 degree solder?
BillythePoet  [Team Member]
7/13/2011 8:26:40 PM
Originally Posted By 762x39nut:
Blind pinned/welded?
3500 degree solder?


I didn't think I could use the solder on aluminum.
Thanks
762x39nut  [Member]
7/14/2011 7:04:16 PM
Originally Posted By BillythePoet:
Originally Posted By 762x39nut:
Blind pinned/welded?
3500 degree solder?


I didn't think I could use the solder on aluminum.
Thanks


I was just refering to steel cans, or steel flash hiders.Sorry,for the mix up.