Archived Posts » 59,789,155
M&P Extractorr pin size?
4/4/2012 11:06:48 PM
I started having double feed issues and replaced the extractor on my M&P 9.
While I was at it, I did the other one as both of them are over 15K.
One had the solid pin and one had the roll pin.
I managed to trash the solid pin, so does any one know what size the roll pin is?
And before you suggest taking the one with the roll pin back out to measure it, I managed to bend the crap out of my 1/16th punch trying to get the solid one out so while I'm at the hardware store buying a new punch I figured I'd grab a new roll pin
While I was at it, I did the other one as both of them are over 15K.
One had the solid pin and one had the roll pin.
I managed to trash the solid pin, so does any one know what size the roll pin is?
And before you suggest taking the one with the roll pin back out to measure it, I managed to bend the crap out of my 1/16th punch trying to get the solid one out so while I'm at the hardware store buying a new punch I figured I'd grab a new roll pin
4/4/2012 11:13:55 PM
Originally Posted By New4John:
I started having double feed issues and replaced the ejector on my M&P 9.
While I was at it, I did the other one as both of them are over 15K.
One had the solid pin and one had the roll pin.
I managed to trash the solid pin, so does any one know what size the roll pin is?
And before you suggest taking the one with the roll pin back out to measure it, I managed to bend the crap out of my 1/16th punch trying to get the solid one out so while I'm at the hardware store buying a new punch I figured I'd grab a new roll pin
I started having double feed issues and replaced the ejector on my M&P 9.
While I was at it, I did the other one as both of them are over 15K.
One had the solid pin and one had the roll pin.
I managed to trash the solid pin, so does any one know what size the roll pin is?
And before you suggest taking the one with the roll pin back out to measure it, I managed to bend the crap out of my 1/16th punch trying to get the solid one out so while I'm at the hardware store buying a new punch I figured I'd grab a new roll pin
Do you mean the extractor?
4/4/2012 11:18:46 PM
Yeah, sorry...little frustrated.
4/4/2012 11:24:54 PM
I believe it is a 3/32 sized roll pin.
4/5/2012 9:46:39 AM
Thanks, that's what I thought but wanted a sanity check.
