Kel-Tec PF-9 Jam - AR15.Com Archive

Kel-Tec PF-9 Jam

dougjames [Member]

11/3/2009 12:28:40 AM

Hey I just got a new PF-9 a couple of days ago and
took it to the range. Out of sixty rounds three failed to
fire. I manual ejected the brass and saw the firing
pin did hit the primer but not as deep as the ones that fired.
Is this a problem with ammo (Blazer Brass) or the PF-9.
Thanks

ColourSgtBourne [Team Member]

11/3/2009 7:21:17 AM

You'll have better luck with this question here http://www.ktog.org/cgi-bin/yabb2/YaBB.pl

dougjames [Member]

11/3/2009 10:45:27 PM

thanks

Noaccount [Team Member]

11/11/2009 4:27:02 PM

I polished my firing pin with some 600grit sand paper and ran a 5/64" drill bit (BY HAND, no drill used) through the firing pin channel, haven't had a problem since.