Archived Posts » 59,789,155
Hornady Lock&Load AP with case feeder
4/29/2012 5:35:44 PM
Could any one with this setup give me the total height with the case feeder mounted
4/29/2012 6:32:08 PM
I'll give you the numbers once I get home, I dont have it with me.. 
If you are contemplating buying one keep in mind I have a bear of a time changing between 9,40 and ANYthing else. .38 hates it, I didn't buy the large pistol plate so I dunno how .45 works, but .357 doesnt feed nicely down the tube. It definitly speeds things but lots of head aches settign it up correctly.
Also loud as could be when you start it up, till it feeds the tube, shuts off, then you pull lever to do a round and it starts back up.
If you are contemplating buying one keep in mind I have a bear of a time changing between 9,40 and ANYthing else. .38 hates it, I didn't buy the large pistol plate so I dunno how .45 works, but .357 doesnt feed nicely down the tube. It definitly speeds things but lots of head aches settign it up correctly.
Also loud as could be when you start it up, till it feeds the tube, shuts off, then you pull lever to do a round and it starts back up.
4/29/2012 6:32:24 PM
38" from top of hopper to the station's base plate where it mounts to a table.
48" from top of hopper to bottom of the lever.
48" from top of hopper to bottom of the lever.
