AR15.Com Archives
 DSA 30rd mags test
M35A2Driver  [Member]
10/3/2011 8:09:59 PM
picked up a few 30rd mags
used 2 and one worked the other didn't
the one that didnt work caused rounds not to be ejected every 3rd to 5th round
when I switched to 20 rd mags it worked fiine

what say you?


I think it just needs to be broken in since it might be having a hard time chambering the next round
Surly  [Member]
10/5/2011 7:27:25 PM
I tried mine last weekend in my FAL and it didn't want to feed from the left side. I still need to try it in my RFB.
JMosesB  [Member]
10/6/2011 8:33:59 PM
So was the bolt riding over the top of the round on the left side?
If so sounds like the mag is sitting too low or the feed lip is holding the left side round to far down.
The left side feed is more susceptible to this as the bolt doesn't have as much meat there to pick up the base of the cartridge.
M35A2Driver  [Member]
10/6/2011 11:39:31 PM
Im going to test out the other ones I have this weekend
I think the spring and inside arent worn down enough (to rough) and the bolt is having difficulty getting past the next bullet
Surly  [Member]
10/7/2011 9:11:45 AM
Originally Posted By JMosesB:
So was the bolt riding over the top of the round on the left side?
If so sounds like the mag is sitting too low or the feed lip is holding the left side round to far down.
The left side feed is more susceptible to this as the bolt doesn't have as much meat there to pick up the base of the cartridge.


It partially feeds and rides over the round. I checked the lip to see if it was smashed down. I'll see how the RFB likes it first before I do any bending.

M35A2Driver  [Member]
10/7/2011 2:55:41 PM
DSA told me that the would take tham back if they didnt work