Equipment Exchange

Colt pre ban 9mm carbine. The front push pin hole is factory drilled.  The fire control is the larger 0.0169" stainless steel pins. I removed the steel sear block and had the receiver professionally relieved for use with a Lighting Link plus KNS LL protector. I also had the Colt 9mm bolt relieved to a semi auto configuration to work with a LL and ramped for a standard hammer. For pre ban use,  the pinned in factory 9mm magwell adapter can be removed and a drop in 9mm magwell adapter could be used. This would allow use of both 9mm and other standard rifle caliber uppers. I sold the LL after finding a DIAS. I can't find the original 9mm hammer or semi disconnector. I can set up the fire control the buyer needs. When I first bought it, not quite 10 years ago, I had a Massachusetts out of state LTC. I used to work in the Boston area and stop at the range on the way home. There is no way to get the Massachusetts Machinegun/NFA License as an out of state resident. So I gave up the LTC.

There are are some wear spots on the outside of the barrel and receivers. I don't know the round count as I bought it used just after the end of the AWB. The rifling is still sharp in the chrome lined barrel. The stock was staked on, but only two positions. I added two more intermediate positions with a drill. I can replace the stock with another Colt four position stock if that is what the buyer wants. The carbine includes one Colt 32 round pre ban 9mm mag. I have an additional 11 Colt pre ban 9mm mags that I will give first refusal to the buyer for $300.00. For Massachusetts residents, we can meet and go to Pelham F&G ranges for you to see and fire. The price does not include shipping to your FFL. First to  post "I'll take it " in this  thread is considered the buyer. If you have questions, please email me through the site. Thank you for your time and consideration.

Scott