User Panel
Posted: 8/6/2022 11:26:12 PM EDT
I just ordered this from Atlantic and wondering what furniture works? I’m new to AK’s and it seems the md63 with dong lower handguard maybe? Thanks
Also what thread pitch would the barrel be? I like the AL74 style brake. " /> |
|
|
[#1]
The completed weapon needs to be 922(r) compliant to be legal, so you need to determine what parts already count for (or not against, technically) compliance and then use the correct number of compliant parts when you complete the weapon.
Chances are you will need US-made furniture and maybe even US-made mags. |
|
So fill to me, the parting glass, good night and joy be with you all.
|
[#2]
Originally Posted By KILLERB6: The completed weapon needs to be 922(r) compliant to be legal, so you need to determine what parts already count for (or not against, technically) compliance and then use the correct number of compliant parts when you complete the weapon. Chances are you will need US-made furniture and maybe even US-made mags. View Quote Lol! 922r police are here! Throw the shit you want on it. Nobody actually cares about 922r. Enjoy your rifle. Barrel threads are probably the standard M14x1LH. |
|
|
[#3]
If you want to discuss the merits of 922r, please do so in GD. This is a tech forum and we don't give advice that flaunts the GCA.
|
|
Preferred Pronoun: Space Lord Mutherfucker
|
[#4]
Nobody but the ATF…and anyone who wants to remain on the right side of the law.
|
|
So fill to me, the parting glass, good night and joy be with you all.
|
[#5]
Originally Posted By KILLERB6: The completed weapon needs to be 922(r) compliant to be legal, so you need to determine what parts already count for (or not against, technically) compliance and then use the correct number of compliant parts when you complete the weapon. Chances are you will need US-made furniture and maybe even US-made mags. View Quote I bet the barrel is US. I would ask Atlantic to be sure. |
|
Preferred Pronoun: Space Lord Mutherfucker
|
[#6]
They said the receiver is US-made and based on current law, I think the barrel has to be US.
|
|
So fill to me, the parting glass, good night and joy be with you all.
|
[#7]
|
|
NUTs
|
[#8]
Thanks for the replies, I’m aware of 922r. Plan is ALG trigger, might do a keymo brake since I have a Sandman-S. I like the look of the 74 brake. I just don’t want the dong lower forend lol
|
|
|
[#9]
It is a US barrel and a Morrisey receiver.
|
|
|
[Last Edit: lagavulin62]
[#10]
OP,
I bought the same one so as far as 922r compliance all you need is to switch out the barrel nut, which sounds like you are already doing. FCG is US. So you can put all foreign parts, including mag, on this and you are fine. I didn’t want the dong either. Just about any furniture, except Yugo, will fit. I can’t remember but last week one dealer had surplus palmswell handguards. Sold out though. AOA has the Romanian buttstocks. But I am going to guess you probably want the Nato length. As far as the handguards, AOA has the new WBP sets that will work with a little fitting. I know because that’s what I am using for now. Oh the muzzle thread 14/1 left hand. |
|
|
[#11]
Originally Posted By lagavulin62: OP, I bought the same one so as far as 922r compliance all you need is to switch out the barrel nut, which sounds like you are already doing. FCG is US. So you can put all foreign parts, including mag, on this and you are fine. I didn’t want the dong either. Just about any furniture, except Yugo, will fit. I can’t remember but last week one dealer had surplus palmswell handguards. Sold out though. AOA has the Romanian buttstocks. But I am going to guess you probably want the Nato length. As far as the handguards, AOA has the new WBP sets that will work with a little fitting. I know because that’s what I am using for now. Oh the muzzle thread 14/1 left hand. View Quote Thanks, I’d like to find original’ish furniture…the dong is growing on me. (Pun intended) |
|
|
[#12]
|
|
|
[#13]
Have you gotten an upper handguard yet?
|
|
Preferred Pronoun: Space Lord Mutherfucker
|
[#14]
Yes I was swapping the wood on it
|
|
|
[#15]
922r does not apply to made in the USA rifles
|
|
|
[#16]
|
|
|
[Last Edit: Nyle_AR15]
[#17]
Originally Posted By Newbombz: So any imported AK kit that is assembled in the US with a US receiver and barrel? View Quote No. Imported AKs aren't built on US receivers. Nor do they have US barrels. Your example was a kit without a receiver and barrel. It used to be a fully functional rifle with a Romanian made receiver and barrel. They demill the rifle and make it a non functioning gun. Once the kit arrives here someone has to rebuild it into a rifle. As long as the rifle is built on US soil then 922r isn't applicable. We use US receivers cause to my knowledge we can't buy receivers from other countries. Imported AKs come into the country as functioning rifles made on that country's receiver. Since it was Imported as a rifle and not a kit it's subject to 922r. Whoever imports the rifle is responsible for putting the compliance parts on it Edit: I read your response incorrectly. You are correct. I missed the word "kit" |
|
|
[#18]
|
|
|
[#19]
|
|
|
[#20]
Originally Posted By borderpatrol: 922r does not apply to made in the USA rifles View Quote Wrong. Parts count still applies (if you want to keep ATF happy, that is another debate). Where you built it means nothing, where the parts were made does. Which is why the receiver is on the list that ATF publishes. |
|
2021 can’t come soon enough!
Edit- well maybe 2020 wasn’t so bad after all..... |
[#21]
Originally Posted By Nyle_AR15: No. Imported AKs aren't built on US receivers. Nor do they have US barrels. Your example was a kit without a receiver and barrel. It used to be a fully functional rifle with a Romanian made receiver and barrel. They demill the rifle and make it a non functioning gun. Once the kit arrives here someone has to rebuild it into a rifle. As long as the rifle is built on US soil then 922r isn't applicable. We use US receivers cause to my knowledge we can't buy receivers from other countries. Imported AKs come into the country as functioning rifles made on that country's receiver. Since it was Imported as a rifle and not a kit it's subject to 922r. Whoever imports the rifle is responsible for putting the compliance parts on it Edit: I read your response incorrectly. You are correct. I missed the word "kit" View Quote Also totally wrong as far as how it works. If you don’t know a correct answer, maybe don’t post your wild guesses. 922 is stupid, but posting bad info and making someone think they are good in ATF’s eyes when they would not be is not actually helpful for anyone. |
|
2021 can’t come soon enough!
Edit- well maybe 2020 wasn’t so bad after all..... |
[#22]
Y'all are still going on with that 922r bullshit?
|
|
|
[#23]
Originally Posted By Deerhurst: Y'all are still going on with that 922r bullshit? View Quote Exactly. Us individual gun owners are not manufacturing anything! We’re simply modifying a gun we bought. 922R should not matter. And I personally don’t worry one bit about it. I I bought gun from a manufacturer or dealer it was in legal configuration. How I choose to dress it with furniture or muzzle break, trigger group should not matter. And I’d wager NO ONE has EVER been charged with this either. Unless they were add on charges after the fact |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.