User Panel
[Last Edit: dmk0210]
[#1]
Originally Posted By FlyLeaf: Snagged a redwood krink from PSA yesterday. I'm guessing a Bulgarian 4.5 pin hole triangle stock will drop right in without any hassle? View Quote Keep in mind there are two set screws inside the rear trunnion. They can be tightened or loosened from inside the receiver with a hex key to adjust tension. Mine were too tight (I had to use a rubber mallet to unlock the latch!), and I was using a PSA triangle stock. I backed them all the way off and the stock fit tightly, but not too tight. The pin required a few light taps with a hammer, but I didn't have to file or sand on anything. |
|
|
[#2]
Originally Posted By dmk0210: Congrats! Keep in mind there are two set screws inside the rear trunnion. They can be tightened or loosened from inside the receiver with a hex key to adjust tension. Mine were too tight (I had to use a rubber mallet to unlock the latch!), and I was using a PSA triangle stock. I backed them all the way off and the stock fit tightly, but not too tight. The pin required a few light taps with a hammer, but I didn't have to file or sand on anything. View Quote Thanks,im excited to get it. Interesting wasn't aware of these set screws. Do these adjust the tension on the latch? So the triangle stock on psa website for $130 is good to go? |
|
|
[#3]
Railed version is in stock as of right now
|
|
|
[Last Edit: dmk0210]
[#4]
Originally Posted By FlyLeaf: Interesting wasn't aware of these set screws. Do these adjust the tension on the latch? View Quote View All Quotes View All Quotes Originally Posted By FlyLeaf: Interesting wasn't aware of these set screws. Do these adjust the tension on the latch? I looked at my PSA AK-102 and it has these set screws as well. I never noticed them before. Originally Posted By FlyLeaf: So the triangle stock on psa website for $130 is good to go? Plus if you ever have any trouble with it, you should be covered by PSA's warranty. |
|
|
[#5]
|
|
|
[#6]
^ Nice! What suppressor are you using?
|
|
|
[#7]
|
|
|
[#8]
Originally Posted By ak4784: https://www.ar15.com/media/mediaFiles/53193/IMG_5597_jpeg-3184921.JPG View Quote Alignment was all good ? I was just sitting here thinking about ordering a FAT CAT when they get back into stock for mine. |
|
|
[#9]
|
|
|
[#10]
|
|
|
[#11]
I haven’t checked alignment yet. Just threw it on real quick for a picture lol.
This being a 30cal can I hope there is some room for error. Although I don’t expect there to be any issues. |
|
|
[#12]
|
|
|
[#13]
Originally Posted By dmk0210: They actually push on the stock itself. Pushing it into the latch. I assume they are there to take up any slack and play as the latch or hinge wears. It's a good idea, but since mine is new and tight, I just put some Loctite on them them and adjusted them flush with the surface of the trunnion. You could remove the set screws completely, but they may come in handy someday if the stock ever loosens up and rattles. I looked at my PSA AK-102 and it has these set screws as well. I never noticed them before. Yeah, it seem nicely made to me. As far as I can tell from pictures of the Bulgarian and Russian stocks, the PSA is an identical copy. Plus if you ever have any trouble with it, you should be covered by PSA's warranty. View Quote View All Quotes View All Quotes Originally Posted By dmk0210: Originally Posted By FlyLeaf: Interesting wasn't aware of these set screws. Do these adjust the tension on the latch? I looked at my PSA AK-102 and it has these set screws as well. I never noticed them before. Originally Posted By FlyLeaf: So the triangle stock on psa website for $130 is good to go? Plus if you ever have any trouble with it, you should be covered by PSA's warranty. Awesome,thank you sir. This will help me out tremendously when I pick it up. I probably wouldn't have seen the set screws. I'll grab the psa stock since it's gtg,thanks again |
|
|
[#14]
Originally Posted By ak4784: https://www.ar15.com/media/mediaFiles/53193/IMG_5597_jpeg-3184921.JPG View Quote That looks amazing, congrats. |
|
|
[#15]
Plum is in stock on PSA
|
|
|
[#16]
|
|
|
[#17]
|
|
|
[#19]
Originally Posted By ak4784: https://www.ar15.com/media/mediaFiles/53193/IMG_5597_jpeg-3184921.JPG View Quote @ak4784 which furniture is this? |
|
"Some people have issues. Sounds like he signed up for an entire subscription." ~Brohawk
Proud member of Team Ranstad. Arfcom St Jude Mafia 3 years Arfcom callsign: trenchfoot |
[Last Edit: ak4784]
[#20]
|
|
|
[#21]
How are the triggers in these?
Haven't gotten mine yet,might grab an ALG fcg. |
|
|
[Last Edit: mak0]
[#22]
|
|
|
[#23]
The trigger is really light and there is hardly any wall/tension before the break. It just breaks. Very smooth trigger all the way through the press. It’s not bad at all, just not what I am used to.
I imagine this would bump fire like crazy lol. |
|
|
[#24]
Cool thanks. I'll hold off getting the fcg and see how I like it.
Used to the feel of a G2,if it's close to that I'll keep it. Ordered 10 of the Bulgy mags from gun mag warehouse and a mustard russian sling.along with a Bulgarian 4.5 triangle stock |
|
|
[Last Edit: dmk0210]
[#25]
The second Klayco47 video dropped this weekend.
TLDW: He did some long range shooting and got good hits out to 300 yards (possibly 400, it wasn't clear if he got hits there). That pretty much dispelled the inaccuracy myth. He shot brass cased ammo and had no malfunctions. Wear was negligible. In case you missed it: First 500 rounds here 1000 Rounds: PSA 556 KRINK: 1000 rounds, Long range, mods! |
|
|
[#26]
Originally Posted By dmk0210: The second Klayco47 video dropped this weekend. TLDW: He did some long range shooting and got good hits out to 300 yards (possibly 400, it wasn't clear if he got hits there). That pretty much dispelled the inaccuracy myth. He shot brass cased ammo and had no malfunctions. Wear was negligible. In case you missed it: First 500 rounds here 1000 Rounds: https://www.youtube.com/watch?v=JNa6NbF7Cvw View Quote Well that video looks promising Mine was just shipped,whoot |
|
|
[#27]
|
|
|
[#28]
Originally Posted By dmk0210: The second Klayco47 video dropped this weekend. TLDW: He did some long range shooting and got good hits out to 300 yards (possibly 400, it wasn't clear if he got hits there). That pretty much dispelled the inaccuracy myth. He shot brass cased ammo and had no malfunctions. Wear was negligible. In case you missed it: First 500 rounds here 1000 Rounds: https://www.youtube.com/watch?v=JNa6NbF7Cvw View Quote Anyone know what side mount and optic offset(not sure if that’s the proper term for his set up) mount he used here? |
|
|
[#29]
Originally Posted By ak4784: Anyone know what side mount and optic offset(not sure if that's the proper term for his set up) mount he used here? View Quote https://rsregulate.com/product/ak-302m/ https://rsregulate.com/product/akml/ |
|
|
[#30]
Originally Posted By D_Man: RS Regulate AK-302M modular mount with rear bias topped with their AKML for the micro dot. https://rsregulate.com/product/ak-302m/ https://rsregulate.com/product/akml/ View Quote Sweet! Gracias Amigo! |
|
|
[#31]
Originally Posted By ak4784: Nice. Congrats! What one did ya get? View Quote View All Quotes View All Quotes Originally Posted By ak4784: Originally Posted By FlyLeaf: Well that video looks promising Mine was just shipped,whoot Nice. Congrats! What one did ya get? Thank you sir I got the Redwood version Should have all my goodies ready for it when I pick it up at the Greenville store friday or Saturday |
|
|
[#32]
Originally Posted By D_Man: RS Regulate AK-302M modular mount with rear bias topped with their AKML for the micro dot. https://rsregulate.com/product/ak-302m/ https://rsregulate.com/product/akml/ View Quote I like these mounts very solid. I'm on the fence though putting one on a krink I may just not right away |
|
|
[#33]
I shot 150 rounds through mine yesterday. Zero problems.
Very loud and visible fireballs in bright midafternoon sun lol. I didn’t run the suppressor on it because I still haven’t confirmed alignment on it yet. |
|
|
[#34]
Originally Posted By ak4784: I shot 150 rounds through mine yesterday. Zero problems. Very loud and visible fireballs in bright midafternoon sun lol. I didn’t run the suppressor on it because I still haven’t confirmed alignment on it yet. View Quote Awesome,glad your experience was good Picked up my redwood krink Saturday. Everything looks great. Was bathed in lots of oil out of the box. Clerk at psa wiped her down for me. Handguards look really good,no wobble. Sights appear to be straight. Smooth safety, very nice trigger. Finish is slick very pleased. Button to fold stock is very tight as is the dust cover button. Should loosen up with use Gonna shoot it this week sometime, will report back on how it goes. So far very happy with this AK. |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#35]
I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon
|
|
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction"
|
[#36]
Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon View Quote They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#37]
Originally Posted By FlyLeaf: They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far View Quote View All Quotes View All Quotes Originally Posted By FlyLeaf: Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 |
|
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction"
|
[#38]
Originally Posted By cyclone: Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 View Quote View All Quotes View All Quotes Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 Your welcome. I think you will be pleased. Find right ammo it likes and your golden. I got 13 of these mags. They fit great,good deal too. Let us know if you get one https://gunmagwarehouse.com/bulgarian-ak-74-5-56x45mm-30-round-reinforced-steel-lug-polymer-magazine.html?avad=55963_a38cfc471 |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[Last Edit: cyclone]
[#39]
Originally Posted By FlyLeaf: Your welcome. I think you will be pleased. Find right ammo it likes and your golden. I got 13 of these mags. They fit great,good deal too. Let us know if you get one https://gunmagwarehouse.com/bulgarian-ak-74-5-56x45mm-30-round-reinforced-steel-lug-polymer-magazine.html?avad=55963_a38cfc471 View Quote View All Quotes View All Quotes Originally Posted By FlyLeaf: Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 Your welcome. I think you will be pleased. Find right ammo it likes and your golden. I got 13 of these mags. They fit great,good deal too. Let us know if you get one https://gunmagwarehouse.com/bulgarian-ak-74-5-56x45mm-30-round-reinforced-steel-lug-polymer-magazine.html?avad=55963_a38cfc471 I will check those out............I already have the Circle 10, AC Unity, Polish and other 5.56 mags that are cross compatible, so a few extra wont hurt Are all of the handguards wood or are some of them synthetic? |
|
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction"
|
[#40]
Originally Posted By Solo_: Jesus Christ I am going to revert mine to that - no matter what one does, that classic look is the shit (my Bulgarian SLR currently) https://live.staticflickr.com/65535/53180450202_bde75dab60_k.jpgkrink by Solo__, on Flickr View Quote |
|
|
[#41]
How has accuracy been with your Krinks? Mine is WAY off. I had a small target(about the size of a sheet of notebook paper) hung up at 25 yards. There was no grouping whatsoever. I couldn’t even tell approximately where my rounds were going.
That being said, I was mostly shooting just to check function and reliability. I was not shooting for accuracy at all. Just plinking at the target. I wasn’t very impressed with what I saw though. This was shooting Winchester M193. Next week I am going to focus on accuracy and try a couple different types of ammo. |
|
|
[#42]
Originally Posted By cyclone: I will check those out............I already have the Circle 10, AC Unity, Polish and other 5.56 mags that are cross compatible, so a few extra wont hurt Are all of the handguards wood or are some of them synthetic? View Quote View All Quotes View All Quotes Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 Your welcome. I think you will be pleased. Find right ammo it likes and your golden. I got 13 of these mags. They fit great,good deal too. Let us know if you get one https://gunmagwarehouse.com/bulgarian-ak-74-5-56x45mm-30-round-reinforced-steel-lug-polymer-magazine.html?avad=55963_a38cfc471 I will check those out............I already have the Circle 10, AC Unity, Polish and other 5.56 mags that are cross compatible, so a few extra wont hurt Are all of the handguards wood or are some of them synthetic? Mine are wood. Looks to be beech or birch |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#43]
4.5 pin to remove stock will not budge. Tapping it from the bottom up.
Any ideas? |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#44]
|
|
|
[Last Edit: FlyLeaf]
[#45]
Originally Posted By D_Man: You removed/opened the top cover? If it's not that, tap harder. View Quote View All Quotes View All Quotes Originally Posted By D_Man: Originally Posted By FlyLeaf: 4.5 pin to remove stock will not budge. Tapping it from the bottom up. Any ideas? If it's not that, tap harder. Yeah i had removed top cover,put some oil on pin. Still not coming out. Beating crap out of it. I'll take a break and try again |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#46]
Originally Posted By FlyLeaf: Yeah i had removed top cover,put some oil on pin. Still not coming out. Beating crap out of it. I'll take a break and try again View Quote |
|
|
[#47]
Originally Posted By D_Man: Also, try unlatching the hinge part from the receiver and letting it sort of swing freely. Sometimes having it locked into the folded open position puts more pressure on the pin. View Quote View All Quotes View All Quotes Originally Posted By D_Man: Originally Posted By FlyLeaf: Yeah i had removed top cover,put some oil on pin. Still not coming out. Beating crap out of it. I'll take a break and try again This |
|
Don't you tell me about galaxies! I walk them in the timeline.
|
[#48]
Originally Posted By D_Man: Also, try unlatching the hinge part from the receiver and letting it sort of swing freely. Sometimes having it locked into the folded open position puts more pressure on the pin. View Quote View All Quotes View All Quotes Originally Posted By D_Man: Originally Posted By FlyLeaf: Yeah i had removed top cover,put some oil on pin. Still not coming out. Beating crap out of it. I'll take a break and try again Got it out finally. Thanks for the tip. Had to move stock around unlocked in few different places to find the sweet spot. That pin was in there. |
|
Neotopiaman -"Communism could take over the Sahara and have a shortage of sand."
SI VIS PACEM PARA BELLUM |
[#49]
Originally Posted By FlyLeaf: Mine are wood. Looks to be beech or birch View Quote View All Quotes View All Quotes Originally Posted By FlyLeaf: Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: Originally Posted By FlyLeaf: Originally Posted By cyclone: I'm really interested in one of these, but have seen some reports of problems with PSA AK trunions and bolts............anyone experience any issues ? I plan on getting one of these soon They are forged trunnions ,bolts and carriers. I have had a lot of AKs in my day this one looks to be of high quality. I'm very happy so far Thanks for the reply..........I was going to get a Stribog, but I think you just convinced me to get a Krink............it will go nicely with my SAM-5 in 5.56 Your welcome. I think you will be pleased. Find right ammo it likes and your golden. I got 13 of these mags. They fit great,good deal too. Let us know if you get one https://gunmagwarehouse.com/bulgarian-ak-74-5-56x45mm-30-round-reinforced-steel-lug-polymer-magazine.html?avad=55963_a38cfc471 I will check those out............I already have the Circle 10, AC Unity, Polish and other 5.56 mags that are cross compatible, so a few extra wont hurt Are all of the handguards wood or are some of them synthetic? Mine are wood. Looks to be beech or birch Thanks..............might get some synthetic furniture from KVar to replace it..............if I can make my mind up between this and a Stribog A3 |
|
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction"
|
[#50]
Originally Posted By ak4784: How has accuracy been with your Krinks? Mine is WAY off. I had a small target(about the size of a sheet of notebook paper) hung up at 25 yards. There was no grouping whatsoever. I couldn’t even tell approximately where my rounds were going. That being said, I was mostly shooting just to check function and reliability. I was not shooting for accuracy at all. Just plinking at the target. I wasn’t very impressed with what I saw though. This was shooting Winchester M193. Next week I am going to focus on accuracy and try a couple different types of ammo. View Quote I'll be curious to see how your groups are next time you shoot..........I am pondering on one of these myself |
|
"The villainy you teach me, I will execute, and it shall go hard but I will better the instruction"
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.