I’ve done some searching and I can’t seem to find anything specifically for this optic. Does anybody know of something that will fit? Thanks!

https://onehundredconcepts.com/products/scopecap-pro

I’ve seen this and considered it an option. Unfortunately (or fortunately) I already have a set of Aadland Engineering caps on my scope. I was hoping there would be something that could screw or slide into the objective lens.

After searching around for a bit I found this one that's made by steiner for binos.
But 30mm is 30mm and it should fit.
They come in a two pack though.
Wanna split it?
BH photo ARD 30mm

Those are thread-on, not slip fit. Let me know if they work and I’ll order a couple myself.

I didn't even notice that they are thread on.
Luckily I didn't purchase it yet.
I might just go with the One Hundred Concepts one.
Hard to justify the price though.

Good find!!

If one of us decided to take the plunge with b&h and it works. I guarantee somebody would snatch up the other one on the EE.

@Blackbird97
Okay man.
I did some more digging and this is what I found.
These are a flip up cap that Aimpoint makes for 30mm optics so these should fit.
I have one for my T2 and it works good.
I'm going to buy one and it says there's 3 available before I purchase mine.
The one for my T2 is rubberized so there's some wiggle room if it's slightly too small.
Ebay 30mm flip cap
And if that's too spicy of a price there's some 3d printed press fit ones also.
3D printed press fit

If you want to wait to see if the Aimpoint one works before getting it, I'll post on this thread when I receive mine and let you know.