User Panel
[#1]
Been contemplating going with a more modern optic lately on this guy. Was thinking along the lines of the sniper comp mk12 but then came across the x50 Nightforce last night and that would probably be the way I went. Huge internal conflict on getting rid of the 36 s-ex, but I also hate the M1 turrets on my mk4.
Attached File |
|
|
[#2]
Originally Posted By revottuneda4: Been contemplating going with a more modern optic lately on this guy. Was thinking along the lines of the sniper comp mk12 but then came across the x50 Nightforce last night and that would probably be the way I went. Huge internal conflict on getting rid of the 36 s-ex, but I also hate the M1 turrets on my mk4. https://www.ar15.com/media/mediaFiles/181541/IMG_1129_jpeg-3166231.JPG View Quote @revottuneda4 shhhh... Just send the #36 my way |
|
|
[Last Edit: revottuneda4]
[#3]
Originally Posted By CMCctx: @revottuneda4 shhhh... Just send the #36 my way View Quote As they say…everything has a price. But this thing was a unicorn, so it’s a tough one to let go. Somehow got a 38 then a 36 in about the span of a year. I’d like opinions on the NXS 3.5-15 if anyone has experience with them. Optics Planet has the second focal plane version for sale right now. Or would I be better off with a Leupold set up? |
|
|
[Last Edit: teamjawbox]
[#4]
Originally Posted By revottuneda4: As they say…everything has a price. But this thing was a unicorn, so it’s a tough one to let go. Somehow got a 38 then a 36 in about the span of a year. I’d like opinions on the NXS 3.5-15 if anyone has experience with them. Optics Planet has the second focal plane version for sale right now. Or would I be better off with a Leupold set up? View Quote View All Quotes View All Quotes Originally Posted By revottuneda4: Originally Posted By CMCctx: @revottuneda4 shhhh... Just send the #36 my way As they say…everything has a price. But this thing was a unicorn, so it’s a tough one to let go. Somehow got a 38 then a 36 in about the span of a year. I’d like opinions on the NXS 3.5-15 if anyone has experience with them. Optics Planet has the second focal plane version for sale right now. Or would I be better off with a Leupold set up? A few have done the NF x50. Didn’t @Shlouf do one? |
|
|
[#5]
|
|
|
[Last Edit: revottuneda4]
[#6]
View Quote Yeahhhhhh that’s the look right there. Looks so good with the sopmod too. What other scopes did you run and how did it compare? ETA: @Shlouf, just saw your for sale thread of the 36. I wish you luck in selling that for every penny in case I go to sell mine too lol. |
|
|
[#7]
It’s #2 behind the 2.5-10x24 for me.
I hope no one buys it, that’s why I put such a high price . I mainly want to trade it for a 38 rail for a mod0 |
|
|
[#8]
Damn, I hope one day I can afford that scope!
|
|
|
[#9]
|
|
|
[#10]
Originally Posted By revottuneda4: As they say…everything has a price. But this thing was a unicorn, so it’s a tough one to let go. Somehow got a 38 then a 36 in about the span of a year. I’d like opinions on the NXS 3.5-15 if anyone has experience with them. Optics Planet has the second focal plane version for sale right now. Or would I be better off with a Leupold set up? View Quote Wish ARMS would make a run of them.. |
|
|
[#11]
|
|
|
[#12]
|
|
|
[#13]
I'll donate to the cause, S-EX rocks.
|
|
|
[Last Edit: Engineer5]
[#14]
|
|
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man. -Thousands and thousands of laws....All for just ten commandments. -"alot" is not a word. |
[#15]
What barrel would you guys recommend since CLE is out of business?
|
|
|
[#16]
|
|
-Things do not happen. Things are made to happen. -JFK
-Beware the fury of a patient man. -Thousands and thousands of laws....All for just ten commandments. -"alot" is not a word. |
[Last Edit: bmmc]
[#17]
Interestingly I had emailed CLE a week or so ago and they said they'd email me an invoice for a SAM-R barrel order. Today I get the generic reply that they aren't taking new orders.
|
|
|
[#18]
|
|
|
[#19]
Originally Posted By Engineer5: Lots of SEX talk going on here lately.... https://www.ar15.com/media/mediaFiles/84711/IMG_20200522_074840-2880185.jpg View Quote Oh, we like S-EX pictures, dirty us up like that. |
|
|
[#20]
Originally Posted By bmmc: Interestingly I had emailed CLE a week or so ago and they said they'd email me an invoice for a SAM-R barrel order. Today I get the generic reply that they aren't taking new orders. View Quote They've stopped doing civilian orders. You can find the post on their facebook page. |
|
|
[Last Edit: Yojimbo]
[#21]
View Quote What PRI handguard is the one in the middle using? |
|
|
[#22]
|
|
|
[Last Edit: JTM20]
[#24]
Originally Posted By Super_Trouper: So, I had a fine, clone correct MK12 Mod 1 years ago and sold it because I had no place to stretch its legs. Now I have plenty and have been itching for one but the cost of parts now have been prohibitive. Well, I picked this up from an older fella Saturday who wanted to buy a newer scope with higher magnification. For $375! It was painted, I stripped it down with citristrip and a toothbrush and to my surprise it cleaned up pretty nicely. Only a few blemishes in the anodizing that could be touched up. Not sure of the laser etching below the Leupold text, unless maybe this was a surplused optic. Suffix dates it to 2003. Then, Saturday evening one of the guys on here offered me a NIB KAC rail for a smoking deal, so here I am. I still had a front sight, scope caps, brake and collar and can sitting in a box in the closet. Ordered a barrel, rings, and gas buster so hopefully I'll get the upper slapped together by the weekend. https://imgur.com/525eGmU.jpg https://imgur.com/EJM6XbQ.jpg View Quote Nice pickup. That’s a surplus TS-30A2 that was refurbished by Leupold and updated with a new illumination housing. I can just make out the lasered out “TS-30 A2” text under the Leupold logo. Is it 2.5-8 or 3-9? |
|
|
[Last Edit: Super_Trouper]
[#25]
Originally Posted By JTM20: Nice pickup. That’s a surplus TS-30A2 that was refurbished by Leupold and updated with a new illumination housing. I can just make out the lasered out “TS-30 A2” text under the Leupold logo. Is it 2.5-8 or 3-9? View Quote 2.5-8 I can’t see it with my naked eye but now that you mention it I can see the remnants of the text in the photo. |
|
|
[Last Edit: Super_Trouper]
[#27]
Originally Posted By JTM20: Yep it’s hard to see but it’s there. Here’s a picture of a similar scope on an M38 when they were testing some alternative suppressors. Note the same box under the Leupold logo. https://i.imgur.com/uqfSIrw.jpeg View Quote That's cool. Any idea why they lasered off the TS-30 A2 markings? To identify them as a factory refurb or some other reason? |
|
|
[#28]
Originally Posted By Super_Trouper: So, I had a fine, clone correct MK12 Mod 1 years ago and sold it because I had no place to stretch its legs. Now I have plenty and have been itching for one but the cost of parts now have been prohibitive. Well, I picked this up from an older fella Saturday who wanted to buy a newer scope with higher magnification. For $375! It was painted, I stripped it down with citristrip and a toothbrush and to my surprise it cleaned up pretty nicely. Only a few blemishes in the anodizing that could be touched up. Not sure of the laser etching below the Leupold text, unless maybe this was a surplused optic. Suffix dates it to 2003. Then, Saturday evening one of the guys on here offered me a NIB KAC rail for a smoking deal, so here I am. I still had a front sight, scope caps, brake and collar and can sitting in a box in the closet. Ordered a barrel, rings, and gas buster so hopefully I'll get the upper slapped together by the weekend. https://imgur.com/525eGmU.jpg https://imgur.com/EJM6XbQ.jpg View Quote You should be reported for elder abuse. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
[#29]
Originally Posted By Super_Trouper: That's cool. Any idea why they lasered off the TS-30 A2 markings? To identify them as a factory refurb or some other reason? View Quote View All Quotes View All Quotes Originally Posted By Super_Trouper: Originally Posted By JTM20: Yep it’s hard to see but it’s there. Here’s a picture of a similar scope on an M38 when they were testing some alternative suppressors. Note the same box under the Leupold logo. https://i.imgur.com/uqfSIrw.jpeg That's cool. Any idea why they lasered off the TS-30 A2 markings? To identify them as a factory refurb or some other reason? Probably so they don't look like "lost" items from the .mil. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
[#30]
|
|
|
[#31]
Are there any cheaper scopes that at least look like they could live on a Mod 0? Unless I just get lucky, the way my work and finances are going it might be a minute before I can get an appropriate scope for my Mod ) project. It would be nice if I could shoot it this year.
|
|
Carpe diem - Seize the day
Carpe per diem - Seize the expense check |
[#32]
Originally Posted By Super_Trouper: So, I had a fine, clone correct MK12 Mod 1 years ago and sold it because I had no place to stretch its legs. Now I have plenty and have been itching for one but the cost of parts now have been prohibitive. Well, I picked this up from an older fella Saturday who wanted to buy a newer scope with higher magnification. For $375! View Quote I hate you! KD, congrats, that is a super find, very jelly! On another note, does anyone remember what page the MK262 ammo can stencil was on? |
|
|
[#33]
Originally Posted By Super_Trouper: So, I had a fine, clone correct MK12 Mod 1 years ago and sold it because I had no place to stretch its legs. Now I have plenty and have been itching for one but the cost of parts now have been prohibitive. Well, I picked this up from an older fella Saturday who wanted to buy a newer scope with higher magnification. For $375! It was painted, I stripped it down with citristrip and a toothbrush and to my surprise it cleaned up pretty nicely. Only a few blemishes in the anodizing that could be touched up. Not sure of the laser etching below the Leupold text, unless maybe this was a surplused optic. Suffix dates it to 2003. Then, Saturday evening one of the guys on here offered me a NIB KAC rail for a smoking deal, so here I am. I still had a front sight, scope caps, brake and collar and can sitting in a box in the closet. Ordered a barrel, rings, and gas buster so hopefully I'll get the upper slapped together by the weekend. https://imgur.com/525eGmU.jpg https://imgur.com/EJM6XbQ.jpg View Quote Attached File Last time I saw someone post a TS-30 near me, they wanted double the going rate at the time. |
|
|
[#34]
Who is currently making correct MK12 MOD1 "cutout-Foam" for Pelican-1700s cases (?).......and contact information if available.
TIA. |
|
|
[#35]
Modern Arm Resources is the only one doing it the correct way, bought one set from him, met the guy and he went to a lot of research and nailed it. Avoid at any cost Cobra foam.
|
|
|
[#36]
Originally Posted By Engineer5: Lots of SEX talk going on here lately.... https://www.ar15.com/media/mediaFiles/84711/IMG_20200522_074840-2880185.jpg View Quote So many cool parts in one cropped pic. Down to the last detail. |
|
|
[#37]
|
|
|
[#38]
With CLE gone, who else does MK12 Mod 1 barrels with Douglas blanks?
Would the PRI ones work even though they're, "designed and profiled for the Mark 12 Mod 0?" |
|
|
[Last Edit: hydrostatic_cling]
[#39]
Originally Posted By JimJardashian: With CLE gone, who else does MK12 Mod 1 barrels with Douglas blanks? Would the PRI ones work even though they're, "designed and profiled for the Mark 12 Mod 0?" View Quote HighCaliberSales has been doing them if you require very close to cloning requirements. The PRI does not mention cuts for the Mod 0 FSB sight, which would be the main difference, and even if it was present it would be perfectly fine with a real Mod 1 gas block. Granted I believe WOA to be a better value in general if you are spray painting to cover the stainless finish. They are even substantially marked down for the Talk Like a Pirate day sale every year. The new SOLGW precision barrels also seem to be excellent, however there is no mention of collar profiling beyond "SPR profile". Those have a very neat 5/8x24 muzzle thread, which is superior to 1/2x28 but so rarely used by anyone. The one company harping on it was the arperformancebarrels shop, but they seem to have been bought out and re-branded. |
|
|
[#40]
Leupold seems to have done this to a few legit scopes. Hurts my heart to see that.
|
|
Looking for all versions of gasbuster charging handles.
|
[#41]
Originally Posted By JimJardashian: With CLE gone, who else does MK12 Mod 1 barrels with Douglas blanks? Would the PRI ones work even though they're, "designed and profiled for the Mark 12 Mod 0?" View Quote contact douglas for the barrel and adco or d wilson can profile it. The whole CLE things sucks. SAM-R barrels are pretty much gone with them. They offered all the good quality barrels and Frank has done more than a few one off type barrels for me not to mention several SAM-R barrels. I would consider them the absolute best at AR type barrels. A true loss and huge hit to the clone community for sure. There were also a ton of douglas surplus barrels that got out a few years ago. I would bet someone has one laying around. I see them used in a lot of builds. |
|
Looking for all versions of gasbuster charging handles.
|
[Last Edit: JimJardashian]
[#42]
Originally Posted By hydrostatic_cling: HighCaliberSales has been doing them if you require very close to cloning requirements. The PRI does not mention cuts for the Mod 0 FSB sight, which would be the main difference, and even if it was present it would be perfectly fine with a real Mod 1 gas block. Granted I believe WOA to be a better value in general if you are spray painting to cover the stainless finish. They are even substantially marked down for the Talk Like a Pirate day sale every year. The new SOLGW precision barrels also seem to be excellent, however there is no mention of collar profiling beyond "SPR profile". Those have a very neat 5/8x24 muzzle thread, which is superior to 1/2x28 but so rarely used by anyone. The one company harping on it was the arperformancebarrels shop, but they seem to have been bought out and re-branded. View Quote I reached out to HCS this morning and they have theirs in stock. Way clone correct, to include the gunkote finish. I'm just seeing if there were other Douglas options. |
|
|
[#43]
Originally Posted By Samson-Dogg: contact douglas for the barrel and adco or d wilson can profile it. The whole CLE things sucks. SAM-R barrels are pretty much gone with them. They offered all the good quality barrels and Frank has done more than a few one off type barrels for me not to mention several SAM-R barrels. I would consider them the absolute best at AR type barrels. A true loss and huge hit to the clone community for sure. There were also a ton of douglas surplus barrels that got out a few years ago. I would bet someone has one laying around. I see them used in a lot of builds. View Quote Thanks! I'll take a look. HCS was my other option. |
|
|
[#44]
Originally Posted By JLAudio: Wow these went up in price. View Quote $765 from Thoroughbred Armament AEM5 Knurled |
|
|
[Last Edit: HotLead]
[#45]
Doubletapped on an old post.
Anyone have pics of a genuine MK262 ammo can? |
|
|
[#46]
View Quote View All Quotes View All Quotes Originally Posted By HotLead: Originally Posted By JLAudio: Wow these went up in price. $765 from Thoroughbred Armament AEM5 Knurled Yeah..but made in Utah |
|
|
[#47]
Originally Posted By Toothpicksandkatchup: Yeah..but made in Utah View Quote View All Quotes View All Quotes Originally Posted By Toothpicksandkatchup: Originally Posted By HotLead: Originally Posted By JLAudio: Wow these went up in price. $765 from Thoroughbred Armament AEM5 Knurled Yeah..but made in Utah Doesn't matter, its still not an Ops Inc. |
|
|
[#48]
|
|
|
[#49]
Originally Posted By HotLead: Doesn't matter, its still not an Ops Inc. View Quote Not to split hairs, but Ron has been the constant factor. From Ops to AE, and even the brains/support behind Trajectory taking these on. Sure the name on the cans is changing, but not really the cans themselves. At least not enough to matter. |
|
|
[#50]
Might be wrong but haven’t seen this ITW pic posted before. Figured I’d toss it in for discussion. PEQ16 and Gripod
Attached File |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.