User Panel
User Panel
User Panel
OK, USA
|
Posted: 4/20/2005 11:19:29 PM EDT
[#1]
|
|
|
|
Posted: 4/21/2005 1:25:09 AM EDT
[Last Edit: No4MK1]
[#2]
O.K. stupid question time.
What is the long indentation between your FCG pin holes? I've seen that on other lowers, but never on a Bushy... Cheers, Chris [edited cause I are dumb] Oh... I see. It's some kind of pin anti-walk clip or something. Never seen those before. |
|
|
|
|
Posted: 4/21/2005 1:26:51 AM EDT
[#3]
KNS non-rotational trigger pins |
||
|
|
|
Posted: 4/21/2005 1:29:37 AM EDT
[#4]
Thanks, I went back and found a pic of another rifle with a better angle. Are they supposed to keep the pins from walking out, or are they supposed to clean up the trigger pull. I've never had a problem with walking FCG pins on a semi-auto, but I could see the utility on a worn lower I suppose. Cheers, Chris |
|
|
|
|
Posted: 4/21/2005 5:27:07 AM EDT
[#5]
The main purpose is to keep the pins from rotating and wearing out the holes in the receiver. They have the added benefit of never walking out and also tightening up the trigger pull to some extent. I think they are most useful on a full auto registered receiver since they'll protect the holes from wearing out in that high dollar receiver. YMMV... |
||
|
|
USA
|
Posted: 4/21/2005 12:23:21 PM EDT
[#6]
Here is another build of mine....
|
|
|
|
Posted: 4/21/2005 2:33:23 PM EDT
[#7]
Looks good to me, man! Seems like I've seen that rifle before somewhere.  Here's the "twins"  M4gery: Bushie lower RRA/Cav Arms furniture Bushie upper Bushie barrel 1/9 twist RRA 2 stage trigger DPMS small parts mostly 9mm: SNS lower RRA parts mostly RRA 9mm upper Same furniture Best part:  But I'm sure you all have seen THAT before. 
|
||
|
|
|
Posted: 4/21/2005 2:59:24 PM EDT
[#8]
I like the twins! I especially like the green furniture. I might have to look in to getting some. Cheers, Chris |
|
|
|
|
Posted: 4/21/2005 3:04:21 PM EDT
[#9]
Man, the telestock and the handguards are easy. I'm into the regular old A2 pistol grip, though, and had to wait for the fun show to get some since they cost about $5 and everyone wants $7 for shipping!
 Thanks! |
|
|
|
|
Posted: 4/21/2005 3:16:32 PM EDT
[#10]
Are they Cav Arms? Are those handguards double shielded? Are you getting good bbq in Texas? So many questions... 
|
|
|
|
|
Posted: 4/21/2005 3:22:27 PM EDT
[Last Edit: kk7sm]
[#11]
Yep, Cav Arms. Not double shielded! But the 9mm will get a rail one day (something cheap I can hang doodads on) and next time I find some double shielded green ones, I'll get them for the M4gery. But I don't shoot auto, so it's usually not that bad. No worse really than when we shot M16A1s auto on the range, in July, anyway!  I miss Dixie's! There's good BBQ here, but no Dixie's! ETA: Dude, we're so hijacking this thread! 
|
||
|
|
IL, USA
|
Posted: 4/21/2005 9:06:36 PM EDT
[#12]
Here's my DPMS Build....
 
|
|
|
|
Posted: 4/24/2005 3:29:58 PM EDT
[#13]
|
|
|
|
|
Posted: 4/25/2005 1:23:20 AM EDT
[#14]
Heres my first:
 16" SS Recon barrel from Denny w/flutes, Phantom fh and Duracoated 12" Larue ff tube (still needs the Larue Battlelight!) Magpul Buttstock/rail covers and trigger guard YHM sights Eotech Samco grip Bushmaster lower It shoots like a dream! |
|
|
|
|
Posted: 4/25/2005 10:16:54 PM EDT
[#15]
My first build:
 DD 12.0 Rail Magpul stock EOTech 512 Double Star lower CMT upper RRA 16" barrel 3-prong FH |
|
|
|
|
Posted: 4/25/2005 11:32:43 PM EDT
[#16]
I'm new to this but here's my first build. just finished tonite.
It ran great at the range!!    
|
|
|
|
UT, USA
|
Posted: 4/26/2005 9:16:21 PM EDT
[#17]
Here's another one of my builds that I managed to finish up last Friday
http://home.comcast.net/~canyonflyer/CAR15_1.jpg Anyway, got a stripped DPMS lower, attached a 4 position Bushmaster Telestock, an M16A1 pistolgrip and the standard parts for the lower. Stripped a used GI M16A1 upper of its barrel. (Got the barrel sitting next to my Colt Slickside upper waiting for assembly) Then removed the teardrop forward assist and replaced it with a standard forward assist assembly. I attached a Bushmaster superlight 16 inch barrel to this with an A1 flash suppressor and tapered Delta Ring, and put in an A1 tapered front sight post. The idea was to make a clone of a GAU-5 that the Airforce PJ's use. http://home.comcast.net/~canyonflyer/Shilling.jpg by the way, if you havent read the book this picture was from, "The Battle of Mogadishu", I would suggest that you do. A very good companion to Black Hawk Down. |
|
|
FL, USA
|
Posted: 4/26/2005 10:00:26 PM EDT
[Last Edit: Firediver62]
[#18]
|
|
|
CA, USA
|
Posted: 4/27/2005 7:00:56 PM EDT
[#19]
Just an observation... but are'nt the handguards on the wrong way?
|
|
|
UT, USA
|
Posted: 4/27/2005 7:10:40 PM EDT
[#20]
HAHA, I noticed that too, but thats just a picture from a book, and Im not going to write the author and tell him his handguards are sideways.....
|
|
|
|
Posted: 4/27/2005 9:12:29 PM EDT
[#21]
Here's a M4gery I threw together to show off the Mega lowers and uppers were selling.
 
|
|
|
|
USA
|
Posted: 4/28/2005 1:14:44 AM EDT
[#22]
I've known PJ and CCT guys, and if he is running his gear that way, its for a reason. |
|
|
|
UT, USA
|
Posted: 4/28/2005 1:27:03 AM EDT
[#23]
I absolutely agree
|
|
|
|
Posted: 4/28/2005 8:19:16 AM EDT
[#24]
Its an Airsoft!  I have never tried to put mine on sideways. Wouldn't you have to modify them to get them to fit that way? With the gas tube cut out? I agree, if a pro sets his rifle up that way, must work for him. |
||
|
|
PA, USA
|
Posted: 5/1/2005 3:28:15 PM EDT
[#25]
What type vest/chest carrier is that and where can I get one? |
|
|
|
WA, USA
|
Posted: 5/2/2005 6:56:58 PM EDT
[#26]
http://tinypic.com/4towua
dpms lower rra a3 upper rra bolt/carrier dpms rear sight cmmginc barrel phantom flash supressor cheap 4 position stock |
|
|
NC, USA
|
Posted: 5/3/2005 12:38:24 PM EDT
[Last Edit: entrefal]
[#27]
Here's my latest build.
After seeing a RRA's Government model I fell in love...so I built my own Started as a Model 1 kit and a Oly lower. Now if someone wants to donate an EOTech this one will be finished  ( I need some better pictures )  |
|
|
|
Posted: 5/3/2005 1:49:41 PM EDT
[#28]
entrefal, I am considering a set up like the one posted. What rear site is that? Did that come with the M1S kit?
|
|
|
NC, USA
|
Posted: 5/3/2005 2:55:16 PM EDT
[#29]
Glad you like it No the rear sight did not come with the M1S kit. It is an A.R.M.S.® #40 |
|
|
|
AZ, USA
|
Posted: 5/3/2005 5:06:27 PM EDT
[#30]
Finished my first build. No fancy CAR crap. Just the same style I shoot while deployed.
RRA lower, J&T 20in A2 flat top upper. http://i2.photobucket.com/albums/y8/oipaloi/newtoy.jpg |
|
|
OR, USA
|
Posted: 5/3/2005 6:06:00 PM EDT
[Last Edit: Commando_Guy]
[#31]
Well, here's a couple:
www.hunt101.com/img/281889.JPG Specs: Bushy lower CMT upper reciever Bushy 14.5" HBAR-former AK brake, now Phantom RRA BCG EOthingie 511 ARMS #40 Next one is kind of a concept, will eventually get a Recon barrel and FF front end (taller rings, too) www.hunt101.com/img/281890.JPG Specs: Stinger lower/ RRA LPK Cav Arms M4 stock CMT upper Unknown bull barrel, cut to 14" w/ FS (custom FS, I believe) CMT BCG (on the way) Gun show special 3-9x scope....we'll see how well it works Nick |
|
|
AZ, USA
|
Posted: 5/4/2005 11:21:52 AM EDT
[Last Edit: moosemcnally]
[#32]
|
|
|
|
Posted: 5/4/2005 2:25:57 PM EDT
[#33]
 Im glad thats you wife's LOL....nice choice in parts, the colors are just.....stunning. |
||
|
|
AK, USA
|
Posted: 5/4/2005 3:06:08 PM EDT
[Last Edit: BU2MuktukJoe]
[#34]
DSA type 2 upper receiver, DSA LW lower receiver, FSE HTS, Hythe sight, Tapco forward assist CH, sand cut BC, DSA 18" medium contour barrel, vortex FH.
 DSA (LMT) lower receiver, CMT LPK, CMT upper receiver, CMT bolt group, Bushmaster 16" fluted Hbar, A2 FH. |
|
|
NLD
|
Posted: 5/4/2005 3:37:31 PM EDT
[#35]
|
|
|
NLD
|
Posted: 5/4/2005 3:43:03 PM EDT
[#36]
|
|
|
|
Posted: 5/4/2005 8:02:36 PM EDT
[#37]
Just finished it today . I love the green , it may be my favorite so far .
|
|
|
|
ME, USA
|
Posted: 5/4/2005 8:40:01 PM EDT
[Last Edit: sapper326]
[#38]
some recent newcomers to the house.
http://img167.echo.cx/img167/9864/123954634bf2b2cfa69rw.jpg and for all those un American AW hating libs who are coming to Maine to try to take these away from me, heres a pic! Yaint gettin this one! http://img166.echo.cx/img166/288/0000035251pz.jpg Waiting on the ACOG! |
|
|
PA, USA
|
Posted: 5/5/2005 12:19:36 AM EDT
[#39]
I kinda cheated. . . I built it from a kit.
 Del-Ton 16" M4 Kit built on a Stag Arms lower receiver. |
|
|
PA, USA
|
Posted: 5/5/2005 12:25:52 AM EDT
[#40]
|
|
|
NLD
|
Posted: 5/5/2005 6:06:46 AM EDT
[#41]
a DPMS Panther bull rifle , JP free float handguard , ACE stock ARFX-E ,Docter 2 dot sight , RB Precision extended bolt release,ARREDONDO mag well
|
|
|
AZ, USA
|
Posted: 5/5/2005 9:13:38 AM EDT
[#42]
Does anybody have their rifle done it Duracoat woodland green I want to see what it really looks like. The Duracoat site sucks for looking at the colors.
|
|
|
AK, USA
|
Posted: 5/5/2005 12:03:08 PM EDT
[#43]
The green looks real good. Very nice. |
|
|
|
USA
|
Posted: 5/5/2005 11:11:21 PM EDT
[#44]
I like it, as it is unlike most others. Why not do the forward assist and the mag release as well?
|
|
|
GA, USA
|
Posted: 5/6/2005 3:40:30 PM EDT
[#45]
http://216.77.188.54/coDataImages/p/Groups/230/230414/folders/170771/1529108M4No1.jpg
Del-Ton M4 Kit on a STAG lower - this is my first 'build' (or should I say assembly?) 16in Del-Ton Govt.Profile 1/9 Chrome lined Phantom 5C2 Flattop with T- Markings OD Furniture (including RRA-marked M4 stock) DPMS BUIS |
|
|
FL, USA
|
Posted: 5/6/2005 9:18:03 PM EDT
[#46]
Here's some of my builds.
 Top to bottom: SP-1 clone: 1/12 barrel from the EE SP-1 upper from a local dealer BCG & CH from ADCO Superior lower & LPK from RB Precision Furniture from the EE SPR, SAM-R, or SDM Clone/inspired rifle: 1/7 Chrome lined HBAR barrel & BCG from local gun show CMT upper from G&R Tactical Superior lower & LPK from RB Precision YHM gas block flip sight, flip up A1 rear sight, light weight 4 rail ff forend, & Phantom from Brightflashlight M4gery: MOS complete upper from Bravo Co. LMT/Lauer lower from Denny's Guns RRA LPK, DD burned loop, M4 complete stock w/ heavy buffer from Eagle Firearms YHM flip up rear sight The M4gery, I completed earlier tonight. Thanks to all the Industry Partners for Great Parts, Service & Shipping! I have a few more builds in mind ..... |
|
|
NC, USA
|
Posted: 5/8/2005 4:27:46 PM EDT
[#47]
Some better photos of mine
  |
|
|
|
Posted: 5/9/2005 4:45:23 AM EDT
[#48]
|
|||
|
|
|
Posted: 5/9/2005 5:32:56 AM EDT
[Last Edit: NickDrak]
[#49]
Send mongo001 an IM or email and let him know what you want. Check out his thread:
ar15.com/forums/topic.html?b=3&f=12&t=199653 |
|
|
|
CO, USA
|
Posted: 5/9/2005 11:23:02 PM EDT
[#50]
heres my first build
started as a bushy stripped lower and del-ton m4 kit. i added some extras like a magpul trigger guard, G27 grip and YHM 2 piece handguard. it had a carry handle but i sold it to fund my A.R.M.S. #40 which will hopefully be here tomorrow, im pretty optimistic since i ordered it from eagle which is about 30 mins from here. next on the to-do list is add an eotech when i can afford it, and possibly a vfg. my digi cam is a pos so i didnt try to be artsy here http://thehackersclan.net/psyko/1112.jpg |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
