User Panel
User Panel
User Panel
MI, USA
|
Posted: 4/16/2024 9:06:12 AM EDT
[#1]
|
|
|
USA
|
Posted: 4/17/2024 3:59:43 AM EDT
[Last Edit: Crye_Sum_Mo]
[#2]
Noveske/Slade's Irregular defense 11.5 mid-length upper.
I ran a GreenOps course this past weekend and it ran like a sewing machine. Very minimal recoil to the point that the instructors were joking that I was running a 22lr. 
|
|
|
TX, USA
|
Posted: 4/17/2024 2:30:34 PM EDT
[Last Edit: M4A1SOPMOD]
[#3]
Quote HistoryOriginally Posted By Crye_Sum_Mo: Noveske/Slade's Irregular defense 11.5 mid-length upper. I ran a GreenOps course this past weekend and it ran like a sewing machine. Very minimal recoil to the point that the instructors were joking that I was running a 22lr. https://scontent-lax3-2.xx.fbcdn.net/v/t39.30808-6/437938982_457832530105098_2567030973874061034_n.jpg?_nc_cat=111&ccb=1-7&_nc_sid=5f2048&_nc_ohc=eO1Cyvm0z4oAb6ogArJ&_nc_ht=scontent-lax3-2.xx&cb_e2o_trans=t&oh=00_AfBBs7TyHmKVKumC8xxP_vVHoPv0dkvdm01dhsN8Bc0PJA&oe=66256127 Looks good! What can you running? If you ever have that thing apart, I'm curious what the gas port size is. |
|
|
USA
|
Posted: 4/17/2024 5:26:21 PM EDT
[#4]
Quote HistoryOriginally Posted By M4A1SOPMOD: Looks good! What can you running? If you ever have that thing apart, I'm curious what the gas port size is. I am running the CGS Helios Titanium. I havent tried their open cap yet, but with the closed cap there is barely any GTF so I think i shall just keep that on. |
|
|
USA
|
Posted: 4/25/2024 8:32:22 PM EDT
[#5]
Was able to get a "B-Line" gen 3 upper, so it begins. Now to get a gen 4 lower... Is direct from Noveske the only source for "B-Line" stuff?
|
|
|
|
Posted: 4/25/2024 8:38:14 PM EDT
[#6]
|
|
|
|
|
Posted: 4/27/2024 4:48:21 PM EDT
[Last Edit: AWHAILYEAH]
[#7]
Time for the Rival V2 to rise up!! Have all parts except the CMC trigger and Noveske TTI Mag base plates which I'm searching high and low for...................Trigger I'm about to order.................
  Also this Chainsaw Match Set, Rail, Barrel 14.5" Afgahn and Receiver extension are a bout to go to the Cerakote shop........................Still debating the color ATM.......     Fucking late night and internet make for some shit.......................................Just waiting on my Gen 4 NSR 15" then these are off to Cerakote!!! That damn 17" Rival V2 Barrel is high as Giraffe pussy so it better be a damn shooter! I assume this Rifle is a competition setup like 3 gun style or some sort??? Would you go with the CMC cassette trigger Noveske puts in these factory rifles or stay the course and G all the things????  Also since Noveske only really offers 3 versions of a rail decided to Zev Wedge the 2013 Gen 1 with the 12.625" and 13.7" Infidel.............. |
|
|
|
|
Posted: 4/28/2024 11:33:24 PM EDT
[#8]
|
|
|
|
|
Posted: 4/29/2024 12:21:34 AM EDT
[#9]
Very nice OfficerX bazooka?
BTW if anyone has a lead on 1 or 2 Black, Bronze or Titanium Noveske TTI base pads please let me know!! As of now looks like I’ll buy couple of the red Taran marked ones and have them get cerakoted |
|
|
|
|
Posted: 4/29/2024 12:53:43 AM EDT
[#10]
Quote HistoryOriginally Posted By AWHAILYEAH: Very nice OfficerX bazooka? BTW if anyone has a lead on 1 or 2 Black, Bronze or Titanium Noveske TTI base pads please let me know!! As of now looks like I’ll buy couple of the red Taran marked ones and have them get cerakoted Yes, Bazooka Green. |
|
|
|
MI, USA
|
Posted: 4/29/2024 8:12:49 AM EDT
[#11]
Gotta love local gen 2 finds.
|
|
|
MI, USA
|
Posted: 4/29/2024 8:16:34 AM EDT
[#12]
Quote HistoryOriginally Posted By officerX: Yes, Bazooka Green. DC killed the cerekote work. Looks killer. |
|
|
|
Posted: 4/29/2024 8:58:07 AM EDT
[#13]
Quote HistoryOriginally Posted By jsxtreme: DC killed the cerekote work. Looks killer. Quote HistoryOriginally Posted By jsxtreme: Originally Posted By officerX: Yes, Bazooka Green. DC killed the cerekote work. Looks killer. Is this a shop or just somebody you guys use? I ask because as bad as I want to do a Bazooka Build all the pictures I see except yours and OX's look so dark and bland! You guys have a pearl like luster to it.............. |
|
|
|
NC, USA
|
Posted: 4/29/2024 9:26:30 AM EDT
[#14]
 
|
|
|
|
Posted: 4/29/2024 9:57:01 AM EDT
[#15]
Quote HistoryOriginally Posted By AWHAILYEAH: Is this a shop or just somebody you guys use? I ask because as bad as I want to do a Bazooka Build all the pictures I see except yours and OX's look so dark and bland! You guys have a pearl like luster to it.............. DC is the owner of SWS https://www.instagram.com/superior_weapons_systems_llc/ |
|
|
|
|
Posted: 4/29/2024 5:46:21 PM EDT
[#16]
Quote HistoryOriginally Posted By AWHAILYEAH: Time for the Rival V2 to rise up!! Have all parts except the CMC trigger and Noveske TTI Mag base plates which I'm searching high and low for...................Trigger I'm about to order................. https://i.imgur.com/VVLWxu6.jpg https://i.imgur.com/nYlD3u7.jpg Also this Chainsaw Match Set, Rail, Barrel 14.5" Afgahn and Receiver extension are a bout to go to the Cerakote shop........................Still debating the color ATM....... https://i.imgur.com/ov5MFzH.jpg https://i.imgur.com/QqmV9gO.jpg?1 https://i.imgur.com/NoWfAGy.jpg?1 https://i.imgur.com/wePG2Zg.jpg Fucking late night and internet make for some shit.......................................Just waiting on my Gen 4 NSR 15" then these are off to Cerakote!!! That damn 17" Rival V2 Barrel is high as Giraffe pussy so it better be a damn shooter! I assume this Rifle is a competition setup like 3 gun style or some sort??? Would you go with the CMC cassette trigger Noveske puts in these factory rifles or stay the course and G all the things???? https://i.imgur.com/vV9x6j7.jpg Also since Noveske only really offers 3 versions of a rail decided to Zev Wedge the 2013 Gen 1 with the 12.625" and 13.7" Infidel.............. I have a CMC cassette and a G SDC. Get the G. The CMC is good, on par with my Timney, but I prefer the G. |
|
|
|
|
Posted: 5/1/2024 12:12:54 AM EDT
[#17]
|
|
|
|
|
Posted: 5/1/2024 12:25:13 AM EDT
[#18]
Quote HistoryOriginally Posted By CJ47: I have a CMC cassette and a G SDC. Get the G. The CMC is good, on par with my Timney, but I prefer the G. Quote HistoryOriginally Posted By CJ47: Originally Posted By AWHAILYEAH: Time for the Rival V2 to rise up!! Have all parts except the CMC trigger and Noveske TTI Mag base plates which I'm searching high and low for...................Trigger I'm about to order................. https://i.imgur.com/VVLWxu6.jpg https://i.imgur.com/nYlD3u7.jpg Also this Chainsaw Match Set, Rail, Barrel 14.5" Afgahn and Receiver extension are a bout to go to the Cerakote shop........................Still debating the color ATM....... https://i.imgur.com/ov5MFzH.jpg https://i.imgur.com/QqmV9gO.jpg?1 https://i.imgur.com/NoWfAGy.jpg?1 https://i.imgur.com/wePG2Zg.jpg Fucking late night and internet make for some shit.......................................Just waiting on my Gen 4 NSR 15" then these are off to Cerakote!!! That damn 17" Rival V2 Barrel is high as Giraffe pussy so it better be a damn shooter! I assume this Rifle is a competition setup like 3 gun style or some sort??? Would you go with the CMC cassette trigger Noveske puts in these factory rifles or stay the course and G all the things???? https://i.imgur.com/vV9x6j7.jpg Also since Noveske only really offers 3 versions of a rail decided to Zev Wedge the 2013 Gen 1 with the 12.625" and 13.7" Infidel.............. I have a CMC cassette and a G SDC. Get the G. The CMC is good, on par with my Timney, but I prefer the G. I have a CMC in my Noveske, but I'm switching it out for a G SSAE. I've had some issues with it not resetting, and the SSAE is far nicer, anyway. Pretty much everything else is a disappointment after the G SSAE. G2S is lame. MBT, lame. The one exception I've seen is the trigger than comes in a Ruger SFAR, feels remarkably similar to a SSAE. |
|
|
|
|
Posted: 5/1/2024 12:26:26 PM EDT
[#19]
Quote HistoryOriginally Posted By Missilegeek: I have a CMC in my Noveske, but I'm switching it out for a G SSAE. I've had some issues with it not resetting, and the SSAE is far nicer, anyway. Pretty much everything else is a disappointment after the G SSAE. G2S is lame. MBT, lame. The one exception I've seen is the trigger than comes in a Ruger SFAR, feels remarkably similar to a SSAE. Quote HistoryOriginally Posted By Missilegeek: Originally Posted By CJ47: Originally Posted By AWHAILYEAH: Time for the Rival V2 to rise up!! Have all parts except the CMC trigger and Noveske TTI Mag base plates which I'm searching high and low for...................Trigger I'm about to order................. https://i.imgur.com/VVLWxu6.jpg https://i.imgur.com/nYlD3u7.jpg Also this Chainsaw Match Set, Rail, Barrel 14.5" Afgahn and Receiver extension are a bout to go to the Cerakote shop........................Still debating the color ATM....... https://i.imgur.com/ov5MFzH.jpg https://i.imgur.com/QqmV9gO.jpg?1 https://i.imgur.com/NoWfAGy.jpg?1 https://i.imgur.com/wePG2Zg.jpg Fucking late night and internet make for some shit.......................................Just waiting on my Gen 4 NSR 15" then these are off to Cerakote!!! That damn 17" Rival V2 Barrel is high as Giraffe pussy so it better be a damn shooter! I assume this Rifle is a competition setup like 3 gun style or some sort??? Would you go with the CMC cassette trigger Noveske puts in these factory rifles or stay the course and G all the things???? https://i.imgur.com/vV9x6j7.jpg Also since Noveske only really offers 3 versions of a rail decided to Zev Wedge the 2013 Gen 1 with the 12.625" and 13.7" Infidel.............. I have a CMC cassette and a G SDC. Get the G. The CMC is good, on par with my Timney, but I prefer the G. I have a CMC in my Noveske, but I'm switching it out for a G SSAE. I've had some issues with it not resetting, and the SSAE is far nicer, anyway. Pretty much everything else is a disappointment after the G SSAE. G2S is lame. MBT, lame. The one exception I've seen is the trigger than comes in a Ruger SFAR, feels remarkably similar to a SSAE. Yeah I was attempting to clone build a factory rifle but I've never had a cassete trigger but I do have 5 SSAE-X Lightning Bows, 3 SDC LB, 4 NM and 2 SD3G Straight G triggers and it's all I know lol..............Except the two Larue's they're not bad but not as fast either |
|
|
|
|
Posted: 5/1/2024 2:13:23 PM EDT
[#20]
Does anyone know what kind of barrels Model # 02000305 have? My COA says "N/A," and I'm pretty sure Noveske themselves (customer service) are just guessing since their copied screenshot from Compliance didn't include barrel type, only length.
|
|
|
|
TX, USA
|
Posted: 5/3/2024 9:47:51 AM EDT
[#21]
Have a gen 3 upper and mlok nsr. Is it normal for the anti rotation pin to fit so sloppy?
Pin measures .118 hole in the rail is ~.124 hole in the upper is ~ .130 Didn't want to set up the split ball mics to get exact, so just used some gage pins. Suffice to say, it's more of a "limited" rotation pin at this point. As useless as the tabs on most handguards. Yeah it won't let it spin 90 degrees, but it will rotate enough to lose iron/laser zero. |
|
|
MO, USA
|
Posted: 5/3/2024 10:11:22 AM EDT
[#22]
Quote HistoryOriginally Posted By M4A1SOPMOD: Have a gen 3 upper and mlok nsr. Is it normal for the anti rotation pin to fit so sloppy? Pin measures .118 hole in the rail is ~.124 hole in the upper is ~ .130 Didn't want to set up the split ball mics to get exact, so just used some gage pins. Suffice to say, it's more of a "limited" rotation pin at this point. As useless as the tabs on most handguards. Yeah it won't let it spin 90 degrees, but it will rotate enough to lose iron/laser zero. yes, i contacted them about it about a year ago. they said yes that is normal as the handguard screwing into the barrel nut is the anti rotation stop too |
|
|
TX, USA
|
Posted: 5/6/2024 2:21:22 PM EDT
[Last Edit: kavants]
[#23]
Quote HistoryOriginally Posted By AWHAILYEAH: Yeah I was attempting to clone build a factory rifle but I've never had a cassete trigger but I do have 5 SSAE-X Lightning Bows, 3 SDC LB, 4 NM and 2 SD3G Straight G triggers and it's all I know lol..............Except the two Larue's they're not bad but not as fast either The correct Noveske/CMC is in stock. @AWHAILYEAH |
|
|
|
Posted: 5/8/2024 2:04:28 AM EDT
[#24]
Quote HistoryQuote HistoryOriginally Posted By kavants: Originally Posted By AWHAILYEAH: Yeah I was attempting to clone build a factory rifle but I've never had a cassete trigger but I do have 5 SSAE-X Lightning Bows, 3 SDC LB, 4 NM and 2 SD3G Straight G triggers and it's all I know lol..............Except the two Larue's they're not bad but not as fast either The correct Noveske/CMC is in stock. @AWHAILYEAH Yeah I was eyeballing it but I just can't get there in my head.............I'll probably try it for the fuck of it but I'm a full on G whore with triggers...... |
|
|
|
TX, USA
|
Posted: 5/8/2024 7:57:04 AM EDT
[#25]
For what it's worth, I have one and really like it.
|
|
|
|
Posted: 5/8/2024 8:05:29 AM EDT
[#26]
Quote HistoryOriginally Posted By kavants: For what it's worth, I have one and really like it. I’ve got enough Geissele I can afford to try something other than the 2 Larues and various mil specs so you have convinced me to fo! Thanks I’ll let ya know once it’s all together how I feel about it. |
|
|
|
|
Posted: 5/8/2024 12:56:01 PM EDT
[#27]
|
|
|
|
USA
|
Posted: 5/8/2024 8:15:55 PM EDT
[#28]
   
|
|
|
OR, USA
|
Posted: 5/9/2024 4:58:14 PM EDT
[#29]
Quote HistoryOriginally Posted By officerX: https://www.ar15.com/media/mediaFiles/335460/IMG_2680-3200967.jpg Beautiful rifle. Do you think Noveske will ever release quadrail or keymod handguards ever again? |
|
|
|
Posted: 5/9/2024 6:40:44 PM EDT
[#30]
Quote HistoryOriginally Posted By LilGucci: Beautiful rifle. Do you think Noveske will ever release quadrail or keymod handguards ever again? I highly doubt it but I’m sure the market and industry will determine that. |
|
|
|
|
Posted: Today 12:17:56 AM EDT
[#31]
Picked up this factory built gen 2 today.
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File