User Panel
User Panel
User Panel
AZ, USA
|
Posted: 3/16/2024 3:38:35 PM EDT
[Last Edit: AZ_SBR]
I started down the path of a Mk17 Mod 0 clone but have been somewhat turned off by the clone correct rifle scopes due to availability and cost. I would like to take advantage of this rifle's capabilities to handle mid-range distances and closer; I'm just not sure if I should look beyond a 1-6 LPVO and consider a 2.5/3-10 or similar.
I've handled and subsequently passed on the Vortex Strike Eagle 1-8, Viper PST II 1-6, and the Trijicon Credo HX .308 BTC. Other 1-6s I've considered are the Vortex Razor Gen II E (ugly color and heavy), Leupold Patrol 6HD CDS-ZL2 (lightweight and made in USA, but most-expensive of the bunch), and the discontinued Leupold Mark 6 M6C1 FFP 7.62 CMR-W ($1399; 34mm tube vs. 30mm for all the others, but this reticle is really attractive though I'm not sure I want MRAD). Any others I should consider? Any other guidance? Thanks in advance! 
|
|
|
AZ, USA
|
Posted: 3/16/2024 4:12:10 PM EDT
[#1]
Not a lot of scopes are going to live on that thing.
I’d go NF 2.5-10, however if you feel thats a no go what about a NF NX8 1-8 ? |
|
|
AZ, USA
|
Posted: 3/16/2024 4:48:23 PM EDT
[#2]
You're talking about the NXS - 2.5x10x42mm? Hmmm...I'm definitely open to that; a bit more than I was wanting to spend, but I've got some hefty credits at Optics Planet
|
|
|
|
Posted: 3/16/2024 5:00:15 PM EDT
[#3]
what is your budget?
scopes can survive , as long as a good mount is utilized & tune the gas. i stay away from cantilevered mounts ;) i.e.: ADM delta-H or delta, Spuhr, LaRue, Borbo SCAR mount are the general preferred ones i prefer 1-8 or 1-10 on my SCAR Primary Arms (PA) Compact PLxC 1-8 Primary Arms SLx 1-6x24mm SFP Rifle Scope Gen IV eotech vudu vcog 1-8 NF is always great, but pricey but also be on safe side, look for manufacturer w/ a good warranty... just in case ;) PA has had good luck w/ SCAR 17s & their scopes NF warranty is great check on others  New Quality Budget Optics from Primary Arms youtube.com/watch?v=2EKPvqhF0ZY start around 2:00 i'm currently rolling the dice on a Swampfox 1-10 in Larue LT111 no issues yet |
|
|
|
AZ, USA
|
Posted: 3/16/2024 5:43:02 PM EDT
[#4]
I can make $1,700 work, but that's the top of my budget. I am planning on running the clone correct Nightforce A110 scope rings (already have them), not a mount. Goal would be a 90% correct clone with the scope not looking too far off from what the Mk17 Mod 0 was issued with. Staying with Leupold or Nightforce would be ideal if I go with a 2.5, 3, or 3.5-10 power scope. Sorry for the dorky parameters
|
|
|
|
Posted: 3/16/2024 5:43:35 PM EDT
[#5]
I put a VCOG 1-8x on mine and love it. Large eyebox. Good at 1x and 8x. Replaced the Kahles 1-6x and is just as good clarity wise.
I put a S&B short dot dual 1-8x on my AR-10 (Daniel Defense) and love it even more. Both scopes should handle the SCAR quite well with the correct mount. Just figure out what you want to use the SCAR for. Battle rifle? LPVO 1-6 or 1-8x. DMR? 2-10/2-12/3-18 etc. Just make sure you get a sturdy well made mount. I use ADM Delta mount for a Kahles 1-6 on my SCAR 17 since 2014 until recent with zero issues. |
|
|
|
|
Posted: 3/16/2024 5:45:51 PM EDT
[#6]
Quote HistoryOriginally Posted By AZ_SBR: I can make $1,700 work, but that's the top of my budget. I am planning on running the clone correct Nightforce A110 scope rings (already have them), not a mount. Goal would be a 90% correct clone with the scope not looking too far off from what the Mk17 Mod 0 was issued with. Staying with Leupold or Nightforce would be ideal if I go with a 2.5, 3, or 3.5-10 power scope. Sorry for the dorky parameters Recommend you use an ADM Delta mount to handle the SCAR’s greater recoil impulse on optics (Impulse = Force x time). The Nightforce NXS scopes are gtg with a good mount. |
|
|
|
|
Posted: 3/16/2024 6:49:35 PM EDT
[#7]
The Leupold MK6 you want is actually avalible at Europtic right now at a very reasonable price. https://www.eurooptic.com/leupold-mark-6-1-6x20-m6c1-rifle-scope-34mm-tube-illum-front-focal-7-62-cmr-w-114337.aspx
Likely the last stock Leupold had that europtic is blowing out. That would be my choice IMO |
|
|
|
AZ, USA
|
Posted: 3/16/2024 6:52:26 PM EDT
[#8]
Periodically you can find the NF 2.5 -10 x 32 and also 2.5 -10x24
They are discontinued, however NF sometimes does a limited run periodically or PP. The eyebox would be a bit tighter tho. Also take a look at euro optic, hit the demo/blemish models link. |
|
|
AZ, USA
|
Posted: 3/16/2024 10:33:37 PM EDT
[#9]
Quote HistoryOriginally Posted By RedFox1911: The Leupold MK6 you want is actually avalible at Europtic right now at a very reasonable price. https://www.eurooptic.com/leupold-mark-6-1-6x20-m6c1-rifle-scope-34mm-tube-illum-front-focal-7-62-cmr-w-114337.aspx Likely the last stock Leupold had that europtic is blowing out. That would be my choice IMO Thats a great deal on that MK 6 |
|
|
|
Posted: 3/17/2024 8:27:55 AM EDT
[#10]
Quote HistoryOriginally Posted By Rubicon777: Thats a great deal on that MK 6 This |
|
|
|
OR, USA
|
Posted: 3/17/2024 4:12:37 PM EDT
[Last Edit: Mblades]
[#11]
I think you first need to decide if you want a LPVO or a traditional scope.
If it’s the former. I think the Mk6 would be a good choice and that’s a pretty good deal but it’s an old design and won’t work with the rings you already have(you could always sell the 30mm you have and get 34s). The Leupold isn’t “clone correct” either although I’m sure some dudes ran that setup at some point. Another option would be the NF nx8 1-8x, arguably better than the Mk6, much newer design, works with the rings you have and can be had for the same money if you buy used or catch a good deal, less if you get one with the old reticle. If it’s the later. I’d take my time and find a deal on a NXS 2.5-10x, a x24 will blow your budget unless you catch a great deal but you can still find a X32 for $12-1300 pretty regularly. Just may take a while if you are picky about what reticle and turret setup you want. Great scopes even by today’s standards and you’d be able to sleep at night knowing you are clone correct. but not really because you’d have a retail scope not a army or navy spec one, so you’ll have to spend 2x the time and money finding one of those |
|
|
AZ, USA
|
Posted: 3/17/2024 5:13:09 PM EDT
[#12]
Thank you
|
|
|
OR, USA
|
Posted: 3/19/2024 4:51:33 PM EDT
[#13]
Somebody needs to buy up those Mk6 for $1399. I keep going back to euro optic kind of hopping they are sold out but getting closer and closer to buying one for my 17.
|
|
|
AZ, USA
|
Posted: 3/19/2024 5:02:01 PM EDT
[#14]
I did end up buying one. Also found the matching Leupold Mark 6 IMS mount for $122.81 shipped at Midway USA. I think it was the last one. Both will be here by Friday.
|
|
|
OR, USA
|
Posted: 3/19/2024 5:07:44 PM EDT
[#15]
Quote HistoryOriginally Posted By AZ_SBR: I did end up buying one. Also found the matching Leupold Mark 6 IMS mount for $122.81 shipped at Midway USA. I think it was the last one. Both will be here by Friday. Nice! Be sure to post up pictures, that will probably push me over the edge. |
|
|
AZ, USA
|
Posted: 3/20/2024 7:46:41 PM EDT
[Last Edit: AZ_SBR]
[#16]
It's gettin' real in the Whole Foods parking lot...
Not sure I'll keep the bipod after all but we'll see.     
|
|
|
OR, USA
|
Posted: 3/20/2024 10:48:12 PM EDT
[#17]
Sweet! Hopefully you get the mount soon.
|
|
|
AZ, USA
|
Posted: 3/28/2024 2:17:52 PM EDT
[Last Edit: AZ_SBR]
[#18]
The Leupold Mark 6 mount was kind of meh, so I jumped on one of the contract overrun Geissele SR-25 (Mark 6) mounts. Happy with the final setup.
  
|
|
|
|
Posted: 3/29/2024 9:57:14 PM EDT
[#19]
|
|
|
|
|
Posted: 3/29/2024 10:27:21 PM EDT
[Last Edit: cowboy]
[#20]
Quote HistoryOriginally Posted By RedFox1911: The Leupold MK6 you want is actually avalible at Europtic right now at a very reasonable price. https://www.eurooptic.com/leupold-mark-6-1-6x20-m6c1-rifle-scope-34mm-tube-illum-front-focal-7-62-cmr-w-114337.aspx Likely the last stock Leupold had that europtic is blowing out. That would be my choice IMO Fine setup and that is a killer price. I have scars with that scope, a NF 1-8, and a NF 3.5-15. The leupy mk6 is probably my favorite combo. ETA: I read further. Great choice!
|
|
|
|
AZ, USA
|
Posted: 3/29/2024 10:55:43 PM EDT
[#21]
Quote HistoryOriginally Posted By cowboy: Fine setup and that is a killer price. I have scars with that scope, a NF 1-8, and a NF 3.5-15. The leupy mk6 is probably my favorite combo. ETA: I read further. Great choice!Thank you! |
|
|
MP, USA
|
Posted: 3/30/2024 10:45:28 AM EDT
[#22]
Quote HistoryOriginally Posted By RedFox1911: The Leupold MK6 you want is actually avalible at Europtic right now at a very reasonable price. https://www.eurooptic.com/leupold-mark-6-1-6x20-m6c1-rifle-scope-34mm-tube-illum-front-focal-7-62-cmr-w-114337.aspx Likely the last stock Leupold had that europtic is blowing out. That would be my choice IMO That’s an awesome price. |
|
|
MP, USA
|
Posted: 3/30/2024 10:49:17 AM EDT
[Last Edit: JoshNC]
[#23]
OP, you chose wisely with that mk6.
|
|
|
AZ, USA
|
Posted: 3/30/2024 11:58:06 AM EDT
[#24]
Quote HistoryOriginally Posted By JoshNC: OP, you chose wisely with that mk6. Thanks dude |
|
|
OR, USA
|
Posted: 4/1/2024 2:01:35 PM EDT
[#25]
Quote HistoryOriginally Posted By AZ_SBR: The Leupold Mark 6 mount was kind of meh, so I jumped on one of the contract overrun Geissele SR-25 (Mark 6) mounts. Happy with the final setup. https://live.staticflickr.com/65535/53617431940_591d306d5d_c.jpg https://live.staticflickr.com/65535/53617194983_1b65133081_c.jpg https://live.staticflickr.com/65535/53619241510_e584b28c55_c.jpg Looks great! Did you get the leupold mount with the bolts on the right side? I run the charging handle on the left so mounts like that Giessele are a no go for me. |
|
|
|
Posted: 4/1/2024 4:15:23 PM EDT
[#26]
Wait... you're turned off of an Elcan SpecterDR 1x/4x because of cost and availability, but are [were] considering a Vortex Razor and Nightforce 2.5-10x42?
|
|
|
|
WV, USA
|
Posted: 4/9/2024 3:13:23 AM EDT
[#27]
Vortex razor hd 1-6 ….does great on my 17. Ive had issues with mk4 series leupold and cheaper vortex on a 17 previously however.
|
|
|
CA, USA
|
Posted: 4/9/2024 10:20:10 PM EDT
[#28]
Ran a 1-10 Razor Gen3 and like it. Considering getting that mark6…..
|
|
|
AZ, USA
|
Posted: 4/9/2024 10:57:53 PM EDT
[#29]
Quote HistoryOriginally Posted By jtb33: Wait... you're turned off of an Elcan SpecterDR 1x/4x because of cost and availability, but are [were] considering a Vortex Razor and Nightforce 2.5-10x42? A new Elcan 7.62 is upwards of $2,400 and are sold out everywhere. They've moved to an updated design and the price has gone up even further. The optics in question were $1,600 or less and readily available. Why the confusion? |
|
|
|
Posted: 4/9/2024 11:49:59 PM EDT
[#30]
Quote HistoryOriginally Posted By AZ_SBR: A new Elcan 7.62 is upwards of $2,400 and are sold out everywhere. They've moved to an updated design and the price has gone up even further. The optics in question were $1,600 or less and readily available. Why the confusion? I paid $1300 for my SU-230 that is on my SCAR 17S, and while the optic is a bit salty, the lenses and function is perfect. Granted, that was about 2 years ago, so I'm sure they've gone up a bit in price. I like that it's the optic that's 'meant' for the rifle.   Regardless, you got a great optic that should work really well on that rifle! |
|
|
|
AZ, USA
|
Posted: 4/9/2024 11:53:10 PM EDT
[#31]
Quote HistoryOriginally Posted By jtb33: Mostly because you can pick up the Elcan optic I'm referring to on the secondary market for that same price-point; around that price. If you want to stay closer to the $1600 mark, you'll have to be a bit patient on waiting for a 7.62 model and not picky on color. I paid $1300 for my SU-230 that is on my SCAR 17S, and while the optic is a bit salty, the lenses and function is perfect. Granted, that was about 2 years ago, so I'm sure they've gone up a bit in price. I like that it's the optic that's 'meant' for the rifle. https://live.staticflickr.com/65535/53476233365_13c45ea693_k.jpg https://live.staticflickr.com/65535/53476232895_b8554d7ba3_k.jpg Regardless, you got a great optic that should work really well on that rifle! Gotcha. I agree that the Elcan looks great on the SCAR 17. |
|
|
|
Posted: 4/9/2024 11:59:49 PM EDT
[#32]
I just have an Elian on mine
|
|
|
|
OR, USA
|
Posted: 4/10/2024 12:57:45 AM EDT
[Last Edit: Mblades]
[#33]
Quote HistoryOriginally Posted By jtb33: Mostly because you can pick up the Elcan optic I'm referring to on the secondary market for that same price-point; around that price. If you want to stay closer to the $1600 mark, you'll have to be a bit patient on waiting for a 7.62 model and not picky on color. I paid $1300 for my SU-230 that is on my SCAR 17S, and while the optic is a bit salty, the lenses and function is perfect. Granted, that was about 2 years ago, so I'm sure they've gone up a bit in price. I like that it's the optic that's 'meant' for the rifle. https://live.staticflickr.com/65535/53476233365_13c45ea693_k.jpg https://live.staticflickr.com/65535/53476232895_b8554d7ba3_k.jpg Regardless, you got a great optic that should work really well on that rifle! Quote HistoryOriginally Posted By jtb33: Originally Posted By AZ_SBR: A new Elcan 7.62 is upwards of $2,400 and are sold out everywhere. They've moved to an updated design and the price has gone up even further. The optics in question were $1,600 or less and readily available. Why the confusion? I paid $1300 for my SU-230 that is on my SCAR 17S, and while the optic is a bit salty, the lenses and function is perfect. Granted, that was about 2 years ago, so I'm sure they've gone up a bit in price. I like that it's the optic that's 'meant' for the rifle. https://live.staticflickr.com/65535/53476233365_13c45ea693_k.jpg https://live.staticflickr.com/65535/53476232895_b8554d7ba3_k.jpg Regardless, you got a great optic that should work really well on that rifle! The Elcan has a host of drawbacks, add into it having to pay $1300 for one that looks like it was thrown down a driveway 87x and has no warranty of any kind and it’s easy to see why people pass in favor of other options. * this is coming from someone who sold a Mk 6 1-6x to buy an Elcn SU-230 |
|
|
|
Posted: 4/10/2024 1:03:56 AM EDT
[#34]
Quote HistoryOriginally Posted By Mblades: The Elcan has a host of drawbacks, add into it having to pay $1300 for one that looks like it was thrown down a driveway 87x and has no warranty of any kind and it's easy to see why people pass in favor of other options. * this is coming from someone who sold a Mk 6 1-6x to buy an Elcn SU-230 |
|
|
|
|
Posted: 4/10/2024 4:18:03 PM EDT
[Last Edit: eurotrash]
[#35]
Quote HistoryOriginally Posted By jtb33: Sounds like you and I have had different experiences with the ELCAN SU-230. There is a reason they command a higher price, and people are willing to pay for it. Quote HistoryOriginally Posted By jtb33: Originally Posted By Mblades: The Elcan has a host of drawbacks, add into it having to pay $1300 for one that looks like it was thrown down a driveway 87x and has no warranty of any kind and it's easy to see why people pass in favor of other options. * this is coming from someone who sold a Mk 6 1-6x to buy an Elcn SU-230 Is that reason because it’s clone correct? If so, that reason doesn’t matter if you aren’t building a clone and just want a good scope. Non-military 1.5x-6x is the same thing, but typically in much better condition. |
|
|
|
OR, USA
|
Posted: 4/11/2024 1:15:37 PM EDT
[#36]
Quote HistoryOriginally Posted By jtb33: Sounds like you and I have had different experiences with the ELCAN SU-230. There is a reason they command a higher price, and people are willing to pay for it. Quote HistoryOriginally Posted By jtb33: Originally Posted By Mblades: The Elcan has a host of drawbacks, add into it having to pay $1300 for one that looks like it was thrown down a driveway 87x and has no warranty of any kind and it's easy to see why people pass in favor of other options. * this is coming from someone who sold a Mk 6 1-6x to buy an Elcn SU-230 They command a higher price because of the low supply and demand from cloners, the reticle is marginally better than the civilian version but that’s it. I had a great experience with the Elcan, doesn’t change the fact it has drawbacks. The ARMS mount sucks, the inability to dial for elevation limits the potential for precision shooting and making hits at distance, it’s heavy, the eye box isn’t good, it’s expensive. It’s still a great option for someone wanting to run the scar as a battle rifle with the option of having a little magnification. For those wanting to exploit the inherent accuracy of the scar and the advantage of 7.62 over 5.56 there are better options. |
|
|
USA
|
Posted: 4/11/2024 1:19:35 PM EDT
[#37]
I have a vortex 3-15 in an adm mount. It's a pretty heavy configuration, and I can't decide if I like it. I'd like to shave weight, but the more I look, I'm not finding very significant weight savings.
VCOG 1-8 would be my choice if budget wasn't an issue. |
|
|
ID, USA
|
Posted: 5/5/2024 3:21:11 PM EDT
[#38]
I'm running an Eotech Vudu Precision 1-10 on my 17S and like it very much.
|
|
|
KY, USA
|
Posted: 5/13/2024 7:30:09 AM EDT
[Last Edit: FloridaMan11b]
[#39]
Had a mk6 3-18 on my scar 17s with a 16in barrel and suppressor. Great setup. A little heavy but well balanced.
Put the 13in barrel on it and it feels better with a t2 & g45 suppressed. Mk6 3-18 now in seekins rings lives on a bergara b14 hmr in 308. I think the mk6 1-6 will be good for my 16in suppressed aero m5. Not sure yet though but I gotta put something in this 34mm bobro scar mount anyway. The eotech vudu 1-10 ffp looks like it might be better for the price. Eta: the giant illuminated circle on the eotech vudu 1-10 doesnt make sense to me so easy pass. Mk6 1-6 on the way. |
|
|
|
Posted: 5/13/2024 8:46:40 AM EDT
[#40]
Good grief, that Mk6 deal is too good to pass up. Enroute...
|
|
|
OH, USA
|
Posted: 5/16/2024 9:33:10 AM EDT
[#41]
Quote HistoryOriginally Posted By BravoSector1: I'm running an Eotech Vudu Precision 1-10 on my 17S and like it very much. From what I’ve seen first hand the 1-10x Vudu punches well above its weight. |
|
|
OR, USA
|
Posted: 5/16/2024 2:00:36 PM EDT
[#42]
Quote HistoryOriginally Posted By FluxIntegral: Good grief, that Mk6 deal is too good to pass up. Enroute... I keep hoping they’ll sell out before temptation gets the best of me. |
|
|
|
Posted: 5/16/2024 11:48:08 PM EDT
[#43]
Quote HistoryOriginally Posted By Mblades: I keep hoping they’ll sell out before temptation gets the best of me. Better man than me... I caved. It hurts so good.. |
|
|
|
Posted: 5/27/2024 11:03:30 AM EDT
[#44]
Quote HistoryOriginally Posted By AZ_SBR: The Leupold Mark 6 mount was kind of meh, so I jumped on one of the contract overrun Geissele SR-25 (Mark 6) mounts. Happy with the final setup. https://live.staticflickr.com/65535/53617431940_591d306d5d_c.jpg Your setup looks great with that MK6! Just curious, what didn't you like about the Trijicon Credo HX and how does it compare to your MK6? I really like the Credo 1-6 and have one on a 16S. I have the NF 2.5-10x42 on my tan 17S and I think it's a great match for the rifle, but you would need an offset red-dot to cover the closer range stuff that the LPVO can handle.  |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
