User Panel
Posted: 1/20/2024 6:37:03 PM EDT
My collection (wife calls it a hoard) of plate carriers, plates, war belts, pouches, etc. is growing faster than so can find places to put it.
I picked up a couple of totes, but there too large for the intended storage space, and the wife squashed my idea of making a tactical table out of them :-) Not concerned about concealment, but I want to keep everything together. One carrier is “pre staged” for household use, but I have others that need to be stored. Placards for different loadouts, that kind of stuff. Without dedicating a full room in the house, what solutions have you found for storage? |
|
|
Dedicated full room in the house. Sorry, it has to be done. Mine is in the basement. |
|
|
My go to gear is in a 2'x8' cubby I built in our walk in closet that houses a small safe with couple guns, nods, thermal, etc. Above that is hanger for helmet, plate carrier, and belt gear. Pack on shelf above that. I don't need more stuff readily accessible than that.
Extra stuff gets totes in the attic or sold. |
|
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
Originally Posted By dogrobber13: Dedicated full room in the house. Sorry, it has to be done. Mine is in the basement. View Quote I've got 1/2 of a room—my office/armory. Currently, I have more office, but I work from home, so it's needed. The closet is for ammo storage, uppers, etc. I want one carrier setup for HD (plates, AR and pistol mags, IFAK) that is grab-and-go. The other(s) are my "main" carrier with it's own plates, battle belt, etc. I have a less tactical carrier in wolf grey for...reasons... and a ranger green one for the wife. She won't be "active" in an HD situation, but she, the dogs, and a 12 gauge (her preferred longarm) are my backup, so she also needs protection. Different placards for AR, SCAR, and eventually the MPX now that I know placards are a thing :-) And... I'm a gear whore. I'm upgrading from Condor level stuff to HRT Gear, Esstac, and Agilite, so there is "decommissioned" stuff to store until I move it to their new homes. All this crap takes up space |
|
|
Totes are how I keep most of my stuff. Other stuff is crammed in a closet in the office.
|
|
|
If you have extra space on your hanging bar, you can use the Tough Hook Hangars and hang plate carriers up on them.
|
|
|
I hang mine in my closet. The full rigs, a chest rig and an LBE hang on three coat hangers zip tied together. For each one of course. The random pouches and unused packs stuff are in totes when not out and my packs I use sit on the closet flloor under the rigs.
I doubled up on the quantity of closet rod hangers. There's a rod hanger shelf bracket on every stud. People do make hangers for gear. I am looking at making some out of rebar since the 3 coat hangers zip tied together is sketchy, but works. |
|
|
Schedule 80 coat rack, tough hooks, and a totes.
|
|
|
Do the tough hook hangers actually live up to the hype? I’ve had one in my Amazon cart, but haven’t clicked buy yet
|
|
|
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
Originally Posted By dunndw: Do the tough hook hangers actually live up to the hype? I've had one in my Amazon cart, but haven't clicked buy yet View Quote Once you get a couple plate carriers, loaded chest rigs etc, the rod quickly becomes the weakest link in my opinion. I've had 2 of the tough hooks for a decade maybe, still rock solid. |
|
|
Originally Posted By jt526: It ain't the hanger you need to worry about it, it is all about installing the world's beefiest closet rod. Once you get a couple plate carriers, loaded chest rigs etc, the rod quickly becomes the weakest link in my opinion. I've had 2 of the tough hooks for a decade maybe, still rock solid. View Quote |
|
"the science" /duh si-ens/ noun: progressive postmodern religious dogma not based in tested hypothesis or facts used to advance an authoritative political ideology
|
|
I have most of my crap- packs, belt kits- in a Pelican case with wheels under a workbench. One PC and inner/outer belt are on a rack nearby. I got the Pelican for the price of rescuing it from the dumpster, and it adapts nicely to my situation.
|
|
"What is socialism? The most difficult and tortuous way to progress from capitalism to capitalism." -Stated at an intel conference, East Berlin, Oct. 1988
"Every election is a sort of advance auction sale of stolen goods." -H.L. Mencken |
Lots of good ideas, especially about beefing up the closet rods., I appreciate the contributions.
|
|
|
Do the plate carrier hangers crush the padding in the shoulder straps?
|
|
Did I just kill another thread?
We are in the middle of a Communist Revolution in the USA. There is no voting our way out of this. |
Originally Posted By trails-end: Do the plate carrier hangers crush the padding in the shoulder straps? View Quote I use a tough hook hanger. I have a Ferro PC w/ lvl IV plates, seven rifle mags, med kit, misc kit, and other odds and ends hanging on it with no issues. The hanger is pretty wide plus you can duct tape pieces of pool noodle around the shoulder sections for added real estate. |
|
|
Originally Posted By dunndw: Do the tough hook hangers actually live up to the hype? I’ve had one in my Amazon cart, but haven’t clicked buy yet View Quote Yes they do. Keep an eye out as there are Chinese versions of these that are a couple of bucks cheaper. I use them for my plate carrier and my training carrier with steel plates. They work very well. |
|
|
|
|
They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. --Benjamin Franklin
Being popular on social media is like being rich in Monopoly |
|
You can get thinner, flat storage totes that slide under the bed for smaller stuff (pouches, etc.) Or go all-out, and build a bed frame designed to clear regular sized storage totes - that REALLY helps with storage (for anything) for stuff you rarely use. You can fit ALOT under your bed with regular sized totes.
Otherwise stack totes 2 high under a closet rod to hang stuff off of. |
|
|
Originally Posted By Alpha-17: Always worth considering to build your own. This rack cost about $20, and an afternoon of work with handtools. https://live.staticflickr.com/65535/53620833752_ae6c193cc3_c.jpg I'm pleased at how it turned out. View Quote i use 4" for the main body then tee it off to 2" you can fill the main tube base with sand or rocks to help make it stable , or get a floor plate fitting and screw it down they can be made free standing or wall mountable if you want to get fancy you could use black pipe and make some nice gear holders , albeit more expensive |
|
|
RS Callsign Mayhem Midget
"I'll come for the killing and stay for the cheesecake" SSgt Jason A Decker. 11/6/09 |
|
Crucifix stand is pretty good for a ready rack.
Tack bags or go bags take up less pace than totes. The tough hook hanger is good gear. Also you know you are supposed to pre stage old AR 500 or excess plate carriers beneath the windows that overlook your main avenues of approach. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.