AR15.Com - ADCO Firearms

shipping to family member

5/19/2013 7:19:06 PM

helping my father put together an upper. going to send the parts to you for assembly fairly soon. would there be any issue shipping it to him when assembled, assuming i put that instruction in the paperwork? as of now his address is...

Installation of a A2 sight tower on a Yankee Hill 9mm Fluted barrel

5/17/2013 2:06:41 PM

Hi ADCO, I have a Yankee Hill 9mm Fluted barrel: http://www.galatiinternational.com/product/YHM90TF.html that i need an A2 sight tower installed on: http://www.bravocompanyusa.com/AR15-Fro...

Have you set a Ruger 77 44 up for a can

5/14/2013 9:42:40 PM

This fall we can hunt deer in Indiana with suppressors. I don't have time to get a can for my 8" 458 SOCOM, so I want to use my 45 TiRant on something. I am thinking a 77/44 and use 44 magnum cases (legal) with a 300 grain bullet at around 1000 ...

Question on barrel extension re profiling

5/14/2013 7:51:19 AM

I have a barrel that I'm planning on having contoured as well as having a MD pinned and KG coated, but the OD of the barrel extension seems to be quite large and creates issues when trying to install it to my upper reciever, as in I have to pound ...

Removing and replacing Noveske SWS Rail do I need to provide the wrench

5/6/2013 5:32:15 AM

Hi, I have a Noveske 14.5" AR-15 upper with a welded on AAC blackout flash hider. It has an 11" SWS railed handguard. I would like to send the upper to adco to replace the SWS with rail with the new Noveske NSR rail. ...

Draco work

5/4/2013 10:22:41 AM

Are you guys able to drill and tap holes in the back of a Draco for stock installation? Thanks.

OPS INC on Light Palma barrel

5/2/2013 3:12:54 AM

I have a Krieger LP barrel that will finish out at 20". How much diameter do I need to cut a shoulder for a 3rd model 556 can to fit? I think at 15" (finished length minus overlap) it'll be around .84".

Chop and thread shotgun barrel for choke

4/30/2013 5:14:02 PM

Are you guys able to cut down a shotgun barrel and thread it for a choke? If so, what's the price?

Remington 700 TriNyte coating under Phosphate and some feedback

4/29/2013 2:20:48 PM

I'm asking for a friend of mine... He has a 700 XCR with the TriNyte coating. The problem is that it's SS finish and he'd prefer black. Can anyone tell me if the Mil-Spec Phosphate finish can be done on top of the TriNyte finish?... ...

CHF FSB 14 5 LW Mid Barrel

4/27/2013 10:26:22 AM

The title says MID but the description says is carbine length. Can you please confirm? Daniel Defense CHF FSB 14.5 LW Mid Barrel 1...

Average turn around

4/26/2013 9:18:18 AM

Hey, Was wondering what your average turn around time is like right now? I'm not sure if you've been hit with the insanity. All I'm looking to do is have an NSR anti-rotation pin drilled, and threads check for concentricity.

Tavor Ops Inc M4 S

4/26/2013 8:52:19 AM

Adco, I have this crazy idea to mount an Ops Inc M4-S on my new IWI Tavor bullpup. I know the M4-S won't be as quiet as a fullsize suppressor, but my intent is simply to take the signature from "definite ear damage" to "maybe a littl...

Question on sending in a complete upper

4/25/2013 1:57:04 PM

I'm sending in a complete upper to be cut from 16" to 14.5". I will be wanting to pin a AAC Blackout fh on it; now how short can I go on the barrel for a suppressor? The rail is a DD OmegaX 12" if that makes a difference. Also its mounted on the...

A1 barrel profile

4/25/2013 11:38:54 AM

Sending in an A2 barrel shortly to be turned down to an A1 pencil profile. Can I just ask for the A1 pencil profile in the comments, or do I need to be more specific? Also, can you do the flare at the muzzle? Thanks

Ruger AC556 K

4/24/2013 4:01:19 PM

Question came up today at LGS about rebuild on above mentioned rifle. Seems like Ruger no longer backs this particular weapon. Would ADCO be able to do a rebarreling , chrome lining, and any other minor repairs to this system and if not can you re...

adco satisfied customer

4/22/2013 11:26:16 PM

sent in a Daniel's Defense barrel, Front sight base, taper pins and battlecomp 1.5 for permanent attachment. Being new to this stuff I did not send a barrel nut or a handguard cap because I simply didn't think about it. Instead of just permanently...

870 Parkerizing

4/22/2013 7:42:52 PM

Hi. I'm going to be sending you guys an 870 express to be parkerized. I know you guys have this listed on your website for $95, but, what parts does this include? Receiver w/ tube, barrel, magazine extension, bolt, etc? L...

Ruger MkIII question

4/22/2013 2:08:12 PM

Hey guys, I have a bull barrel MkIII that I'd like a section of rail mounted on, 6 o'clock position, just forward of the trigger guard, so that I can mount a

Loose barrel indexing pin Can anything be done

4/11/2013 9:32:07 PM

I have an LMT barrel that I can actually pull the indexing pin out of the barrel extention very easily with needle nose pliers...The barrel extention is tight, but I do not have headspace gauges on hand right now. If I send it to you, can yo...

Ops Inc stuff

4/11/2013 2:08:47 PM

While I wait for the WOA barrel/Ops Inc combo, two questions. 1) Any M4-M on the horizon? I am sure you guys are first inline for Ron @OPS. 2) If I sent a LaRue stealth upper to be fitted for your Model 12 collar a...

Do you guys get this alot

4/10/2013 9:14:22 PM

People sending you guys full size barrel to get threaded so they could use it on the compact model? I have a M&P9compact I want threaded and I have access to the full size M&P9 barrel. Would it work? What do I need to do when I send it? So I need ...

870 barrel work

4/9/2013 10:00:07 PM

Need a 18.5" 870 barrel cut down to 14" for my SBS, can you do it?

FSB Install Service Question

4/6/2013 10:53:04 AM

Are Non-F height .750 FSB's available as an option on your FSB installation shop service? I plan to mate my .750 barrel on a M-16A1 upper receiver where a F-marked FSB is not optimal. Thanks!

Mini 14 work

4/6/2013 10:05:18 AM

Do you do work on mini-14 barrels? I want to cut crown and thread to 16.25 and move the front sight back and pin it in place. I have an a2 flash hider that i wan't to put on it. It's a stainless barrel from about 2001 production....