AR15.Com - ArmaLite

Carry handle compatible fornt sights

6/16/2013 1:03:00 PM

I have installed a low-profile gas block and 12" free float tube on my AR10 carbine. Was wondering what rail-mounted front sight would be compatible with the AR10 detachable carry handle.

B Demise Is ArmaLite Working on Alternate Mag Sources for B s

6/10/2013 7:14:54 PM

I'm curious if we will ever see B Gen 2 mags coming from other sources than ArmaLite and if ArmaLite is working with Magpul, et all towards that end. Also if ArmaLite sees the B rifles sunsetting into history in the next few years?

Armalite M15A4 Carbine Coyote 223 15A4C

6/7/2013 3:26:40 PM

I saw one of these listed on Gunbroker, and I have not seen them on the Armalite website. Are these production rifles or cobbled together by the gun dealers? Looking at it created an itch I may have to scratch.

Any chance of a chrome np3 bcg

6/6/2013 6:34:24 PM

Has this been discussed before? I need to buy a spare bcg as I'm using my spare after the other one died. I would like a chromie

SRP Mod 1 Carbine versus Midlength how to decide

6/1/2013 4:27:02 PM

Greetings, I'm looking to pick-up an Armalite SPR Mod 1 in .223/5.56 but I can't decide between the midlength and carbine versions. What are the pros and cons of each? Also, as a tech question to Armalite, do both versio...

A10A4CBF Wait times

5/30/2013 1:21:51 PM

So, Im not expecting Armalite to publish ETA's or anything but I backordered an A10A4CBF on Jan 6th of this year and I was told 8-12 weeks..(I assumed 6 months) I just got a reply from the dealer and I am now being told no sooner t...

ETA on Clamp On A2 Front Sight

5/22/2013 10:20:16 AM

What is the ETA on the Clamp-On A2 Front Sight? I back ordered one through DSGArms so I can get in line in case they get some in. This is the last piece I need for my build. I know a post back in December said you're using all your sights for your...

Magazine shortages updates from armalite

5/20/2013 2:39:46 AM

So just as during the last (08) scare, I didn't buy anything and stocked up after it cooled off, I wish to do the same. Just added another fifty pmags and fifty gi mags to the pile now that I can get them all for ten bucks or less. Ho...

Barrel profile question for Tim or anyone else who may know the answer

5/10/2013 3:04:39 AM

I have a SPR Mod 1 Midlength and a M15 carbine upper I bought from you at Perry. I took the hand guards off of the carbine upper and noticed the thickness of the barrel underneath. I was surprised to see that the barrel under the hand guard is n...

Silly question about free float tubes

5/8/2013 12:11:27 AM

Hi Guys, Considering the still rather heavy production schedule everyone in the biz has, I know this is a silly question but I just had to ask it. Is it possible to order an Armalite M15 free float tube without the weight red...

Verbage Verification Please

4/11/2013 7:28:28 PM

Greetings! The Armalite M15 specs call for a "Double Lapped, Chrome Lined\Chrome Moly Vanadium MIL-B-11595-E" barrel. Does that mean they are chrome-lined over chrome moly OR does it mean they are EITHER chrome-line OR chrome-moly? ...

Damn Fine Rifle

4/10/2013 7:20:29 AM

Got a bayonet lug from Armalite this week and mounted it yesterday on my AR10A4BF.Looks sweet with an M7 bayonet on it.Went over the rifle with an oily rag while I had it out of the safe,and made a decision.Going to keep this one in iron sights (h...

Fitment issue with a new Armalite OD grip

4/3/2013 9:31:53 AM

Ordered a new set of furniture for my AR10. Notice the gap between the grip and receiver, yes, screw has been tightened. Seems the OD grip I received is .0945" shorter.......any thoughts?

Question about position of caliber stamping on barrel

3/8/2013 1:30:19 PM

I just picked up this AR-10T the other day and wasn't sure if this was right. Is the caliber stamping supposed to be facing up? I thought most barrel stampings were on the underside.

flash hider

3/4/2013 1:53:52 PM

Is the flash hider on a M15 pinned or welded?

Stop LEO sales in ban states

2/28/2013 4:18:12 PM

Dear sirs, I know that you are valiantly fighting to protect our RKBA, but I would like to tell you that I'm disappointed in your decision to sell items to LEO's in ban states that are not able to be purchased by ordinary law abiding citizens. I a...

ARMALITE EFFORTS AGAINST BANNING HIGH CAPACITY MAGAZINES

2/27/2013 12:33:31 PM

The following is a letter, and then a link, from ArmaLite President Mark Westrom regarding ArmaLite's efforts against the banning of high-capacity magazines. February 27, 2013 - Here's the background: As most of us know, there is ver...

Any ETA on rifle length receiver extensions part EL0370

2/27/2013 11:36:03 AM

Thanks!

Frustrated with Armalite customer support

2/20/2013 9:13:40 PM

I purchased a while back an AR180B. Loved the rifle, however, when it was discontinued, I contacted Armalite and they said "No problems, we got your back". Fast forward 4 years. My AR180B had developed a wobble. A slight Side to side wobble of the...

Anybody know who did Armalite s camo guns a few years ago

2/14/2013 5:41:06 PM

I was wondering who made the camoed entire guns, mostly AR-10s, iirc, that were available with compensators during the AWB. I think they did two patterns, Realtree and Advantage Classic, and I thought it was an IL company that did the work. ...

Any ETA on AR 10 mags

2/5/2013 10:46:45 AM

We all understand the state of the industry right now, just a question. I'm glad you guys are doing well and understand if you are holding the last ones to ship with rifles. I just need one more 5 pack of 20rd mags

ArmaLite OEM AR 10A Recoil Check Compensator reviews anyone I think I want to buy one

2/5/2013 2:21:55 AM

It's significantly less expensive than aftermarket compensators and made for my new rifle. Any reason not to get one? Anybody wanna sell one?

Bought a NIB Armalite AR10 from my LGS Failure to feed problems

2/3/2013 7:11:50 PM

I contacted psd@armalite.com just now, but wanted to post here too in the hopes of getting an answer from someone at Armalite. I bought a NIB AR10 from my LGS on 12/19. I took it out for the first time today and got failure to feeds ...

AR 10 t carbine

1/27/2013 12:43:26 PM

I was thinking of swapping the stock on my rifle to the magpul moe. Anyone know for sure of it will fit without any mods?

ar10 monolithic upper

1/23/2013 9:00:38 PM

I didnt go to SHOT this year. Did Armalite still have this going as a possible upper?