5 45 Complete upper bolt interference issues

5/13/2013 2:27:50 PM

Hello all..... I am now the proud owner of an Adams Arms 5.45 upper, I have waited about 4 months and it is really fun to shoot. However I have ran into an issue, I cleaned, and lubed the entire thing and shot about 5...

My new 7 5 AA PDW EVO ULTRALITE PISTON UPPER

5/12/2013 11:28:51 PM

I moved the sites over from my 10.5 upper, but still need to get a red dot. This is my first piston upper. The 10.5 runs perfect. Hopefully this one does too. Going to try to hit the range on Tuesday.

Any ETA on 7 5 Voodoo barrels

5/5/2013 11:06:38 PM

I really want one of these, but everyone is OOS

Piston Conversion Kit w 625 Diameter Low Profile Gas Block Mid Length ETA

5/3/2013 12:33:43 PM

I am looking for one of these for a light(er) weight rifle. Midway is show Out of Stock, which is not a real surprise. The surprise is they showing an availability date in Jan 2014. er..wow. Will these be available before then? A...

Missing screws

4/25/2013 3:59:03 PM

I bought a AA pistol kit that came with an adams arms/samson rail for the pistol legnth and it was missing the 4 screws that secure the rail system to the barrel. Is there any way I can order them?

Still in Ozona

4/24/2013 12:03:12 PM

Did you guys move from you location off Orange street and the Trail? Was thinking about stopping in giving a little "extra patrol" since I work in that area.

AA 7 5 PDW Build

3/24/2013 4:40:03 AM

As the title says, just started building (and finishing up) my first 7.5" PDW build. I went with Adams Arms 7.5" Tactical Elite upper and PRI flip up sights. Have it sitting on a Sun Devil billet lower with RRA lpk. Hopefully getting my Geissele t...

Low profile gas block and free float handguards

3/24/2013 12:12:21 AM

I would like to know if the new (?) low profile gas block on the AA carbine conversion will fit under a Troy MRF or a DD Lite Rail (9 or 10" rails) Or would I have to remove a lot of material from the handguard?

PWS enhanced buffer tube

3/22/2013 9:27:11 PM

anyone using this tube? I have a midlength upper. What spring and buffer should I use ? thanks

manimal low pro flash hider

3/22/2013 1:33:43 PM

has anyone seen one of these things in stock? anywhere? im on email alerts for several shops that list them out of stock and emailed adams arms directly but it seems like trying to find tears from a hetero unicorn would be easier.

So is any hope for a 308 piston kit totally dead with you guys

3/17/2013 8:28:09 PM

I know you guys were working on it for quite some time and it got put on the back burner, not sure if this project was ever officially killed. Obviously everyone knows it would be a huge seller. So do you guys ever plan on trying to ...

adam arms compatible with cmmg bolt carrier

2/19/2013 7:17:29 PM

I want to use my CMMG piston bolt carrier because it's left handed. I want to use the Adams Arms piston kit so it will fit under my handguard. Will this work. what are the dimensions of the striking face of the carrier between the two.

Best Lower for AA Evo mid length upper

2/18/2013 8:12:39 PM

I recently bought an Evo mid-length upper from Midway, and boy was I surprised when they were in stock! I was going to put it on my DPMS lower, but I decided to just build a complete lower for it. My question is, what is the best stripped lower ...

New Adams Arms Upper

2/12/2013 10:39:03 AM

So I got in a new Adams Arms Upper last week. http://www.midwayusa.com/product/776700/adams-arms-ar-15-a3-evo-ultra-lite-mid-length-gas-piston-upper-assembly-556x45mm-nato-1-in-7-twist-16-barrel-melonite-finish-with-12-extended-free-float-modular-...

Midway Backorder

1/31/2013 8:34:13 PM

Hey guys, been a long time lurker but this is my first post. So midway through December I ordered an AA upper (UA-16-M-EUL-556) from midway. At the time they were back-ordered till 12/28/12 so i thought no big deal, i'll have it in 2 ...

Adams Arms midlength piston drive rod assembly

1/30/2013 12:19:53 PM

Greetings! I am helping a friend get his upper finished. But he has ordered the wrong length(rifle instead of mid-length) do you happen to know where or who might have in stock a midlength piston drive rod assembly? I have...

AA piston at 15 000rds

1/21/2013 9:07:25 AM

Talking with alot of people at the Adams Arms booth this Shot Show, I mentioned there was a picture on the AA facebook page of a piston at 15,000rds to demonstrate the relability and how often you dont hav...

Any vendors have the gas regulator by itself in stock

1/8/2013 3:20:34 PM

I need just the regulator, not the block/rod etc.

Will my spikes tactical 22 conversion work in a dedicated adams upper

1/5/2013 10:39:17 PM

Hey guys. With rounds going up in price like crazy. I'm wondering if I can put my 22 conversion into my adams upper. I figure it should be fine if I just remove the piston rod and turn the gas block to the off position.

AA monolithic kit

12/30/2012 5:04:20 AM

So what exactly is the difference between the kit designed for the monolithic uppers and the regular kits? I know it says that they arn't compatible with regular uppers, but why?

5 45 bolt

12/19/2012 5:39:54 PM

Do you all sell just the 5.45 bolt?

matching set

12/18/2012 7:18:04 AM

My local gun store is getting in some billet lowers and uppers. I want to build my second rifle, I built my first one with dpms parts and a pws system. Still have it and it runs great. But anyway I am looking to a my own highend BR. Is Adams arms ...

What size thread are the set screws for the AA piston dedicated uppers

12/14/2012 12:47:52 PM

Not the pinch type blocks, but the set screw style.

Worrying light strike issues and lots of brass shavings with Adams Arms mid length complete upper

12/9/2012 1:49:47 PM

Hi everyone, I just put together my first AR-15 build, it's an Adams Arms complete mid-length piston upper on top of a CMMG complete lower. Everything is stock setup, no changes to these two parts. I have been having major issues with...

Armalite M 15 Adam Arms Carbine Piston System Fail Zero Bolt Priceless

12/2/2012 4:34:47 PM

http://http://i891.photobucket.com/albums/ac119/carollou3/image-1.jpg[/img]

Having some serious problems with my Adams Arms Complete Upper Problem fixed

12/1/2012 2:32:43 AM

So I just got a brand new Adams Arms 16" midlength upper. I put it on my lower and was checking the functionality of everything when I ran into two major problems. First: When I go to chamber a round the Bolt will ...

Midlength and steel cased 223

11/26/2012 7:20:55 PM

Hi all, Been wanting to join this site and ask this question for a while now. I have had an Adams Arms mid length upper for quite some time and I have not been able to get it to cycle on Tula or Wolf. I would...

Anybody try the JP Silent Captured Recoil Spring

11/24/2012 7:03:09 PM

Awesome idea, was wondering if it was worth the money. Would like to see if anyone has tried it on their AA piston gun yet. I have 5.45 16" upper, 20" 5.56 upper, and a 16" 5.56 in the works.

A2 Flashhider doesn t fit on my Adam Arms Upper

11/23/2012 8:53:42 PM

Hi Guys, Probably a stupid question... but does the Adam Arms complete upper take a different Flashider than the standard A2? I ask because I just purchased an AA complete midlength upper and the guy sent it over with ou...

What gas port diameter for a 12 5 5 45 barrel

11/22/2012 1:19:51 PM

I'm looking at putting together a 12.5" barrel, 5.45x39 upper with a midlength piston system. What size gas port diameter do you recommend? Thanks, USSA-1

AR15.Com - Adams Arms