SP3G complete uppers or IRMT 3 stripped upper

5/20/2013 8:32:10 PM

Any plans of releasing these uppers that are offered on your complete rifles? I already have a decked out Seekins billet lower...but it sure is lonely without the upper. I'd even be satisfied with the release of the IRMT-3 upper and 15" rail and I...

MCSR V2 barrel nut

5/20/2013 6:00:06 PM

What weighs one pound and is shipped from Lewiston, ID? Gotta guess... Barrel nut,,, received a shipping UPS label creation notice from Seekins. Arrival date May 28, Can't wait.!

Gas block height

5/20/2013 4:41:28 PM

I am currently putting together a seekins build and was just curious as to what height of gas block can fit in the SP3R hand guard?

SP223 back in stock at primaryarms

5/20/2013 11:41:21 AM

https://www.primaryarms.com/Seekins_Precision_SP223_Upper_includes_forward_as_p/sp-223-upper.htm

SP223 Billet Upper In stock 5 17 2013

5/17/2013 3:44:07 PM

It is in stock at Stonefire Arms http://www.stonefire-arms.com/view/product/35/ HURRY!

SP223 billet uppers in stock

5/17/2013 3:43:14 PM

http://www.stonefire-arms.com/view/product/35/

Thanks Seekins stripped lower fixed and returned

5/15/2013 6:51:38 PM

Just wanted to post here to publicly thank Seekins for their outstanding service. A little while back I had to send back my forged lower because it wasn't dropping mags freely. I received it back today and it is now fixed. They handled everythi...

seekins fluted barrel

5/15/2013 11:50:43 AM

Glenn - any chance of putting my hands on an 8" radially flute 300 blkout barrel?

Billet lowers NO LOGO in stock

5/14/2013 1:13:05 PM

I know a few people here were searching for these...Go!

Pic Request Seekins billet upper lower with Daniel Defense Lite rail

5/13/2013 11:52:52 PM

Anyone have this set up or seen a pic?

Seekins Lower Detent Defect

5/13/2013 1:48:43 AM

I built out a Seekins Billet lower today, and I am having an issue with the front takedown pin fitting as it should. As I inspect this, I am noticing that the drilled hole that houses the detent and spring that retains the front takedown pin isn't...

New AICS mags are tight in my Seeking bottom metal

5/12/2013 12:30:51 PM

(also posted in Precision Rifles) I have a Rem 700 with the Seekins AICS short action bottom plate. The 5 round mags that I have been using fit correctly (in my opinion) and are just loose enough to drop free.

Seekins Lower Mag Release problems

5/11/2013 8:37:06 AM

I tried test firing a lower that I built up and I'm having problems with full mags not being able to be seated correctly. This problem has caused a couple of failure to feed. I've tried a couple of different mag releases. PSA, RRA, and a CMMG m...

Billet lowers in stock

5/10/2013 8:01:45 PM

http://www.primaryarms.com/Seekins_Precision_SP_223_Billet_Ambi_Stripped_Lowe_p/sp-223-lower-gen2l.h...

Anyone know where there is a Seekins Enhanced Bolt Catch In Stock

5/10/2013 4:35:08 PM

Looking for an enhanced bolt catch to finish a build. Out of Stock everywhere I've looked.

Is it possible to install a Ejection Port Cover with URX 3 1 Rail installed

5/5/2013 3:45:57 PM

Hi, I have a Seekins SP223 Upper and was wondering how to install a replacement Ejection Port Cover with a rail already attached to the upper. Because you only insert the pin from the Right side there is no hole on the left side.

Seekins adjustable gas block

5/4/2013 9:19:20 PM

How is this set when they ship? With the gas full open? Thanks in advance

Need help with my P223 lower

5/3/2013 4:30:32 PM

There is a screw that appears to be interfering with the way my trigger sits in my lower, which is not allowing me to get my safety in. I have tried to remove the screws under the grip but I have no clue how to adjust this one. Any help would be g...

Seekins sp223 Billet Upper in stock

5/3/2013 1:46:56 PM

They are in stock at Rainier Arms.. Get them before they are all gone!!

seekins sp223 instock

5/2/2013 3:17:19 PM

Stonefire arms go now

Question for Glen when you get time and 9786

5/1/2013 11:11:36 PM

If you had the time, what one product would you like to bring to the market? Thanks Jerry Snyder San Antonio, TX

ugh and now the SP3R rail is hitting the SP15 lower at the pivot pin

5/1/2013 8:28:24 PM

I'm not impressed. Just finished my build: Seekins SP15 forged lower Seekins IRMT-3 upper Seekins SP3R rail The bottom of the rail touches the pivot pin and won't allow me to close the upper and l...

Installing barrel nut onto IRMT 3 question

5/1/2013 5:59:20 PM

The flats on the barrel nut take a 1 1/8" wrench. But I don't have an adapter for my torque wrench. A 1/2 inch drive adapter to 1 1/8" crowfoot wrench is abit specialty, even Home Depot doesn't have one. I can Amazon one, but the only one liste...

Billet Mag Release Finish

4/30/2013 11:07:32 PM

Not a huge deal but just wondering why the finish on the mag release never matches the bolt catch or ambi bolt release? Those are always so shiny and nice looking and all three of my mag releases I've bought have been very dark and dull. Only one...

WTB Seekins Lower SP223

4/30/2013 3:19:25 PM

If anyone has one they want to sell and not for these outstanding prices, then I am interested. I can make payment ASAP.

Your favorite complete upper combo

4/28/2013 6:28:22 PM

When we do get the bolt carriers and other items we don't make (yet) in we will be offering a bunch of different combinations of uppers. What would you like to see assembled and in stock ?

Seekins BAR rail barrel nut or rail out of spec

4/28/2013 5:45:56 PM

Alright so I finally got my last part that I needed to finish my build last week and sat down to put it together. Everything went swimmingly up until the time it came to putting the BAR rail on. I slid the rail over the barrel barrel and started ...

Seekins Advanced Tactical Compensator

4/27/2013 10:55:26 PM

Seekins Advanced Tactical Compensator Has anyone used one of these? How are they? Are they to loud? Do they offer any flash suppression with the design? Thanks in advance

Seekins sar rail inside dimensions

4/27/2013 12:33:58 AM

Seekins claims 1.5 inside diameter. Anyone know for a fact this is true or exact measurements? Height of my vltor low profile gas block is 1.373. Want to know for sure it will work before trying to buy one. Thanks for any help nd info!

Seekins Lowers and Upper recievers Weight

4/26/2013 5:39:20 PM

Hello,, just wondering if someone new the weight of the billet lower and uppers. It would be great if Seekins listed all the weights of their components. .Thanx

AR15.Com - Seekins Precision