AR15.Com - Rifles, Uppers, Lowers, Barrels, and more

Gas tube quality

5/24/2013 6:40:48 PM

I would like to find out if the gas tubes from DMPS or other random brand is as good as a gas tube from BCM. I'm not looking to hear everyone's favorite brand, just wondering if there is technical info to be had on any difference. For example w...

Who makes a shorter butt stock

5/24/2013 2:30:47 PM

I posted this over on the SBR forum, but figured someone here might have some info too since a shorter butt stock could be a good thing on any size AR not just an SBR. Im looking for something along the lines of the LWRC UCIW stock t...

Paladin Machine under Fortis REV

5/24/2013 11:35:39 AM

Looking for a 3 position adjustable gas block to fit under a Fortis REV. Is Paladin machine still in business/how to I contact them, and does anyone know if his gas block will fit under the handguard?

7 NSR and QD Socket

5/24/2013 9:33:07 AM

Those of you that have the 7" NSR and a QD socket, where are you positioning it on the rail? I'm trying to find the best location. I'm right handed and have a QD endplate. I'm using a MS3 sling right now. I positioned th...

Spike s SAR Rail Length

5/24/2013 8:53:25 AM

Spike's makes a 12" rail and a 13.2" rail. What would be the advantage of going with the additional 1.2 inches?

whats the fit and finish like for the Gen 2 Surplus Arms and Ammo stripped lower

5/24/2013 8:43:58 AM

What is the general consensus of quality of fit and finish for the Gen 2 Surplus Arms and Ammo stripped lower. thanks in advance Mazdog

Upper Rail Compatibility

5/24/2013 3:11:37 AM

Before I drop the money, I just want to double check/see if anybody has tried it: Will a Geissele MK4 work ok with a MUR upper? Thanks guys.

NSR or URX4 on Reece style rifle

5/23/2013 9:48:47 PM

I'm in the process of planning and parts buying for a recce setup for my next ar. I have previous experience with the NSR on a SBR project that I sold off. I like the idea behind the URX4 and having keymod on more than 3,6 & 9. It ill be helpful w...

I m looking for a Sig Sauer M400 OEM front sight

5/23/2013 6:56:10 PM

I am new at the forums. I am looking for a Sig Sauer M400 OEM front sight. Any help would be helpful thanks.

KAC URX 3 1

5/23/2013 4:58:40 PM

Hello, I'm looking for a handguard KAC URX 3.1. I'm find informations or videos to install the handguard. It's very complicate? Otherwise, what handguard do you recommend? Thank you in advance.

Can Anyone tell me what handguard this is

5/23/2013 1:52:17 PM

I have the same model Windham SRC in the picture and I am looking to get a new handguard. I came across this image and liked how the rail lines up with the railed gas block. I have no clue what make it is so if you know please pass on the info. Th...

Chop front sight while on gun thanks for the good answers will do

5/23/2013 11:32:40 AM

Can I chop the front sight while still on the gun. I've got time, a hacksaw, and hand files. Besides time why couldn't I leave it on? I just bought the fortis rail.

Got a question about my stripped upper and lower

5/23/2013 11:20:17 AM

So I got a stripped lower from Anderson MFG. and a stripped lower from Aeroprecision. Got them for $109.00 for lower and $89.99 for the upper. I noticed that on both the upper and lower there is a keyhole mark on them. I asked a salesman at my LGS...

What came with my Mega Arms forged lower

5/23/2013 7:02:32 AM

Whats this screw that came with my mega lower? it seems to have a hard plastic smaller tip at one end? Is it a buffer screw for the pistol grip bolt? EDIT: The whole...

Shorten a A2 Hook stock Choate

5/23/2013 5:09:04 AM

Want to get it as short as possible, I guess to A1 length, w/ the standard stock tube. I do has a disk grinder. Should I give it a try or just order a new stock of some sort?

Help decide Fortis or NSR

5/22/2013 10:31:42 AM

I have shorter fingers so the NSR seemed like a good idea. It is expensive and I haven't been able to find one new. The fortis is in the same weight class, 100$ cheaper and is in stock. The I like the quick detach points standard but how big ...

DPMS Oracle

5/21/2013 11:57:14 PM

I am new to the AR15 platform other then my time in the ARMY where I didn't have need to mod my M4. I have recently purchased a DPMS oracle and want to put a 12 inch free float rail system on it. I know I will have to use a low profile gas block b...

A3 Upper vs M4

5/21/2013 8:25:28 PM

Do the A3 uppers have any feedramp cuts at all? I've got a BCM that is an M4 and an Anderson that I thought was an A3 but it has small notches for the feed ramps but they are not as deep as the BCM. Would that make it an M4? Thanks

KAC RAS M4

5/21/2013 3:09:04 PM

I installed the rail months ago without a problem but now I'm trying to remove it for cleaning but cannot get the top section to budge despite loosening the screw and depressing the hand guard retainer. Anyone have any ideas how to ge...

Receiver extension buffer tube advice please

5/21/2013 9:19:49 AM

I am building an A2 service type rifle utilizing a White Oak Armory service rifle barrel- and a MagPul MOE stock. I need to decide upon a Receiver extension buffer tube setup- and about all I know about them is that I need a rifle length tube, not...

Triggers RRA Two Stage Match vs Geissele SSA vs Geissele SSA E

5/21/2013 7:27:07 AM

I have a Larue Stealth upper(18" barrel...12" handguard...) on a rifle I'm trying to gear up to be a DMR-ish / prarie dog slayer rig. I currently have a RRA two-stage match trigger in it and it seems OK. I'm wondering if the Geissele...

BAD ASS seelctor and Geissele Hi Speed Trigger

5/21/2013 6:18:47 AM

Hi Guys I recently fitted a Hi Speed National Match Trigger and am in the process of buying a BAD ASS selector. Is there any known fitting issues with the selector, am I likely to have to relieve it to accommodate the tr...

Which AR Lower If you could choose any

5/21/2013 12:03:17 AM

OK... I'm sure it's been asked before, possibly even recently, but in light of current happenings in and about our great union; if you could start your dream build with any lower receiver what would it be and why? ...

Handguard for 10 5 Noveske

5/20/2013 11:15:43 PM

I am trying to decide which handguard to use with a 10.5" Noveske barrel with a switchblock. I have narrowed it down to the Samson Evolution 7" EX or the YHM Todd Jarrett Competition Carbine length. These are both similar handguards that have an e...