SB15 Mod lock please

5/16/2013 7:11:46 PM

Has anyone here used the SB15? I am considering my first pistol. I would like to know any pros and cons of this device. I did a search and saw that the inventor is a veteran and member here. **Just found the 10 page thread on this. I ...

Is this considered a pistol 16 barrel with carbine buffer

5/16/2013 12:27:26 PM

Hello all, I've got a lil' dilemma here. I've got a Grizzly receiver that has never been built. Has never had a barrel, buffer, lower parts kit, nada assembled to it as of yet. I want to built this into a pistol with a 10" or so barrel an...

Cycling Issues

5/15/2013 9:51:44 PM

After replacing my damaged bolt i took to the range to finally test my pistol build. It woud constantly double feed, FTE and trap the used shell casing backwards by the bolt as depicted in the pictures. Setup details below. Any recommendations ...

BCG for pistol

5/15/2013 8:51:01 PM

Here's the budget pistol build as it sits (or ships as I'm waiting on parts): ASA 95% Lower, Fealty 80% Lower, or Pebble Peak 80% Lower (whichever gets here first) PSA FDE MOE LPK Phase 5 Complete Pistol Buffer Tube Assembly

What do I need to change to turn my pistol from 223 to 300blk

5/15/2013 8:49:03 PM

What would I have to change out to turn my pistol from a .223/5.56 to a 300BLK; just my barrel and KX3 Flash Suppressor? Will it use the same BCG?

Problems Wont Cycle

5/15/2013 3:05:55 AM

I was trying to zero my scope on my new pistol build and I ran into a problem. It will only fire one shot at a time and it won�t eject the spent casing. I am using Lake City Ammunition 5.56x45mm NATO 62 Grain XM855. What can be the ca...

Here is what I did

5/14/2013 9:58:21 PM

Is it your opinion that ATF would throw the book at me? I am by no means trying to bend the rules and try to have an SBR without having one. The condition of this buffer set up is permanent without having tools to remove it, a stock will not work ...

Trying to figure out a pistol build under 50oz per new jerseystan laws

5/13/2013 6:15:02 PM

Who makes a polymer upper and lower, lightweight 7.5" barrel. What else do I need to know to get this started since the bushmaster type 97 is being sold or auctioned at rape me prices

Vltor VIS 9 upper and rail

5/13/2013 4:00:03 AM

Will it accept an 8.5 pistol gas system noveske barrel under the handguard?

Thinking about a pistol build Questions inside

5/12/2013 8:45:02 PM

Total noob here and I'm seeing a lot of people using a padded buffer tube and putting on a CCA riser. Is would you be able to shoulder that legally? If so Id definitely build a 10.5" rig. Id also be able to run a AVG on that right?

possible pistol build

5/12/2013 1:09:26 PM

I have assembled a number of ar 15 rifles but never a pistol what would the recommendations as far as buffer systems go and barrels it my understand ( I could be wrong) the gas port in barrel can be problematic?

Shooters Jacket

5/12/2013 3:32:06 AM

This may be a really stupid question, but is it legal to run a padded shooters jacket with an AR pistol, or do they consider trying to put any support behind the buffer tube creating a stock? I run one of these at work when I have to...

Anyone know where I can find a pistol buffer tube

5/10/2013 10:33:02 PM

I'm almost done building my second AR pistol and the last thing I need is the pistol buffer tube. Anyone know where I can find one in stock. I am growing impatient and I'm about to just use my extra carbine buffer tube. If I used a regular carb...

My AR15 pistol w Sig pistol brace

5/10/2013 7:29:22 PM

DTI 11.5" upper Troy DOA rear sight Sig pistol brace

Magpul ASAP sling mount end plate Anyone running them on a pistol

5/9/2013 11:04:01 AM

Magpul ASAP Receiver End Plate Sling Adapter I'm to a point in my p...

She runs

5/9/2013 7:39:56 AM

So I finished up the Zombie Slayer build the other day. I had to swap out the BCG with one of my rifles to get it to run correctly but it runs great now. Spikes Tactical Lower, with a serial number that begins with SBR-xxxxx Mo...

Need help solving an issue with my 9mm build

5/8/2013 9:56:37 PM

When I pull the charging handle back the bolt locks about 2" before battery. This is on a factory 10.5" RRA upper. I can't tell what it's hanging up on. The bolt is not ramped. It looks like it is hanging up on the buffer pin or the hammer. Does t...

KX3 in Stock

5/8/2013 9:24:34 PM

Had a notification going for Rainer Arms... Didn't see the email for 30 minutes... by the time I got there it was OOS again... Not in a huge rush as I'm waiting on an 80% lower, but I'm curious how often these have been popping up?

Anything inherently faulty about a 7 inch barrel upper

5/8/2013 6:25:21 PM

Are 7 inch pistol uppers prone to failures? I'm wanting to build a pistol with a 7 or 7.5 inch barrel and I feel like I've heard people say these can have problems. It would be in .223 or 5.56. If there are problems, wha...

My First AR Pistol Build Kinda Different

5/8/2013 6:00:01 PM

Everyone seems to be preparing for the Zombie apocalypse so I figured I'd build something to address the Alien apocalypse. Sorry for the shit pictures!

Teardrop FA

5/8/2013 12:35:07 PM

As I get closer to having all the parts for my pistol build, I am going after little stuff while I wait to find some of the remaining big items. Considering the forward assist for the upper I have coming in, I thought maybe I'd go with a teardrop ...

Rail options for 10 3 Barrel

5/8/2013 1:42:25 AM

I have been looking at rails, and I really like the look of a rail that extends over the end of a barrel with the flaming pig sticking out slightly. Just from looking at pictures on here, it looks like you need an 11" rail to get that looks with a...

Ar question

5/6/2013 11:50:33 PM

I don't really know where to post this, and I read up some info but I m slightly confused. I want to replace my m4 style plastic hand guard to quad rail, I getting either utg mid length or barska, I know they r ok quantity, som...

2 pistol uppers range report sort of

5/4/2013 8:16:44 PM

So I've now went on my first range trip with my pistol. I originally built the 7.5" upper for the pistol, but also wanted a 10.5" SBR. So I just finished the 10.5" upper on Wed, and fired both for the first time on Friday.

RRA PDS Pistol Buttstock options SBR

5/3/2013 7:59:21 PM

Ok, I'm getting my tax stamp for my RRA PDS Pistol and wanted to know if there were any other buttstock options for this Pistol / SBR? I know tromix makes an adapter for the MKA-1919 for different buttstocks.....is the MKA-1919 lower ...

AAC Blackout or Noveske KX3 on 12 5

5/3/2013 6:40:51 PM

Trying to decide and it dawned on me, who better to ask than the users. Which would you use on a 12.5" barrel and why?

Left Handed shooter

5/3/2013 6:37:28 PM

I am a left handed shooter and I am in the process of building an ar pistol. I am most like going to get the Phase 5 tactical buffer tube kit. I am wondering if i shoulder fire the weapon will the ejecting case will hit me in the face. Any other l...

Pistol buffer tube

5/3/2013 2:46:39 PM

Any of these in stock anywhere? All I can find is http://www.amazon.com/AR-15-Pistol-Buffer-Assembly-Spring/dp/B00BRWE19Q http://www.amazon.com/gp/product/B00BTN7C8U/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=1535523722...

First Pistol Build Not Satisfied please give advice

5/2/2013 10:11:38 PM

I will get a component list together when she is all done, but wanted to quickly throw this on here to get your thoughts. Something seems a bit off. I used a DD 9" Omega X in the hopes of using the Flaming Pig flash hider...not so much, it becam...

AR15.Com - AR Pistols