My AR is a fatty

5/19/2013 7:19:20 PM

My POF weighs in at 9 .5 lbs w/ acog. Hope I don't have to carry it far.

Which buffer weight

5/19/2013 6:04:05 PM

I just got an Adams arms 11.5 carbine upper with a spikes tactical lower. Right now I have an H buffer in the lower. Should I go lighter or heavier or will it be fine with an H buffer?

Adams Arms Piston Conversion Kit Pricing question w 1 pcs BCG

5/19/2013 5:07:55 AM

What's the pre-craziness price that was going for a AA carbine Piston Kit (w/ 1pcs BCG)?? I got all my parts to complete new build and this kit would finish it. The lowest I have found is $299 and there is a 5% off making it $289/w free shipping....

LMT Piston 14 5 Barrel

5/19/2013 2:38:06 AM

Does LMT produce any 14.5 inch MRP piston barrels? I did not see any listed on there website, but when I googled it I did notice some for sale ads for the barrels. Are these real, or just chopped 16 inch barrels? Is there a reason why LMT does not...

new 7 5 AA PDW upper dust cover flips open

5/16/2013 3:27:52 PM

My dust cover would flip open when I insert/tap the mags into place without cocking. What's the best solution?

Piston design questions

5/16/2013 8:33:09 AM

Been trying to figure out the differences in the piston systems of various manufacturers and make a choice about a .308 piston ar. Thought I would toss up what I have so far and see if you experts could give me some advice as to which system you ...

CA 15 Recon Question

5/16/2013 5:43:25 AM

Who has them? What do you like/ not like? Anyone know the back story as too why they chose the AA Piston set up? Besides NiB, what else did they enhance on the system? Is it worth the money? And Yes, I have seen the Nutnfancy video many times, he ...

Timney Trigger in Ruger SR556

5/15/2013 10:48:13 PM

Greetings all, I just recently picked up my first piston AR.....I was reading as much as I could find about different piston guns, and was wondering if any of you have heard of issues with replacing the trigger on piston guns?

Which piston systems OEM accept RLL

5/15/2013 12:11:04 AM

I'm watching subguns for same.

5 45 piston upper Cam Pin problems

5/14/2013 4:16:16 PM

Hello all..... I am now the proud owner of an Adams Arms 5.45 upper, I have waited about 4 months and it is really fun to shoot. However I have ran into an issue, I cleaned, and lubed the entire thing and shot about 50 ...

LWRCi M6 SL Upper

5/14/2013 12:45:42 AM

Guys, Purchased an M6-SL upper from an ARFCOM member last week. He sent it off today and I should be getting it on Friday. Have any of you guys that own this type of upper done anything to yours, e.g. modifications, other rail/handg...

adams arms extra parts

5/11/2013 10:22:34 PM

I am looking for extra bolts and possibly one more carrier, AA seams to be out of every thing so any one else know a good place to get those items ?

LWRC UCIW Buffer Tube

5/9/2013 11:43:57 PM

What length buffer tube does the LWRC UCIW use? If a tape measure is placed inside the tube to the edge what does it measure? Thanks.

Sig 716

5/9/2013 1:55:42 PM

I have a chance to pick up a Sig 716 AR10, with case and 100 rounds for $1829. Is this a good deal? Also, I know this is a new rifle. Is it a good one? Thanks

Pistons and rails

5/8/2013 10:21:59 PM

Will a piston system work with either TROY of Noveske hand guards.. Thank for the help Havoc

Barrel Nut Rotation Question

5/8/2013 4:35:25 PM

I have an adams arms mid length upper, i recently bought a samson mid length rail to go on it, unfortunately when i tightened the forearm around the barrel nut it seemed to have loosened it, and now that ive tried tightening it im worried because ...

AR10 Piston Uppers

5/8/2013 3:26:27 PM

Could some folks please post links to all the current manufacturers making AR10 Piston Uppers.

Osprey question

5/8/2013 3:06:38 PM

Does anyone know if Centurion C4 handguards are compatible with the Osprey piston system?

LWRCi extraction issue and accuracy issue

5/8/2013 8:30:38 AM

I have a new LWRCi M6A2 14.7" rifle I got NIB. It is having an extraction issue where sometimes the spent casing doesn't eject and jams up. I called LWRCi and they want me to send in the entire upper because they think some of the extractors had...

Can the rail on my LWRC be changed

5/7/2013 10:29:46 PM

I have and m6a2 and would like to know if the rail can be changed to something else. I'd like to have something longer like the LWRC spr,

Any body have a spare AA 625 gas block and gas pin How about a mid gas rod

5/7/2013 6:38:54 PM

The mid gas rod would be nice but I REALLY need a gas block. The gas pin and the mid rod I can swap between rifles(I am building a second gas piston AR15). I dont need a full kit. I have spare bolt springs, THREE carriers that will work with AA an...

Experiments with two Low Mass Carriers and AA mid gas system

5/7/2013 12:59:16 AM

JP says they DON"T like gas piston systems because you can't adjust the gas like you can with their adjustable gas blocks. I say Bullpucky! You CAN adjust the gas with an AA system...infinitely down to zero. Just becasue they have detents doesnt m...

OPS 416

5/5/2013 7:54:12 PM

Any complaints? Any worries?

SIG 516 question

5/3/2013 11:44:39 PM

Actually an accessory question. A buddy just picked one up and hasn't had a chance to shoot it yet. The rifle has the quick release front and rear swivels. Is there a pamphlet or a picture that explains how to configure the sling? ...

SIG 516 question

5/3/2013 11:43:25 PM

PWS MK114 Mod 1 First impressions

5/3/2013 6:03:24 PM

I have been so happy with my MK114 Mod ) (as they are now called) I had no real reason to get one of the Mod 1s but alas how could I resist. The two biggest improvements were N0 1; the adjustable gas system (since i don't run a suppre...

SR 22 Rail parts fit SR 556E just fine

5/1/2013 2:30:36 PM

I was looking for a short bit of rail to use in the front location on my SR-556E to mount my GG&G tripod. I saw a posting in a 22 forum that said the SR-22 parts should fit. I measured the distance between the holes and looked at the pictures and...

PWS Barrels

4/30/2013 8:14:45 PM

Are the new Mod 1 version of the PWS rifles no longer stainless steel ? Looks to be Chromoly now.

Torque ing flash hider

4/30/2013 11:28:29 AM

I have an AA upper. I will be installing the YHM FH. According to YHM it has to be 15-25 ft. lbs. of torque. My question is do if I use the armorer's tool to tighten how can I determne I applied the correct torque? If ano...

reduced loads

4/30/2013 12:06:42 AM

I'm pretty new to all of this "ar stuff" but I've got a couple old fashioned "non-piston" rifles. I've noticed that on some of the piston rifles that the gas is adjustable. Has anyone been successful shooting reduced loads? I have a favorite load ...

AR15.Com - AR Piston Systems

My AR is a fatty

Which buffer weight

Adams Arms Piston Conversion Kit Pricing question w 1 pcs BCG

LMT Piston 14 5 Barrel

new 7 5 AA PDW upper dust cover flips open

Piston design questions

CA 15 Recon Question

Timney Trigger in Ruger SR556

Which piston systems OEM accept RLL

5 45 piston upper Cam Pin problems

LWRCi M6 SL Upper

adams arms extra parts

LWRC UCIW Buffer Tube

Sig 716

Pistons and rails

Barrel Nut Rotation Question

AR10 Piston Uppers

Osprey question

LWRCi extraction issue and accuracy issue

Can the rail on my LWRC be changed

Any body have a spare AA 625 gas block and gas pin How about a mid gas rod

Experiments with two Low Mass Carriers and AA mid gas system

OPS 416

SIG 516 question

SIG 516 question

PWS MK114 Mod 1 First impressions

SR 22 Rail parts fit SR 556E just fine

PWS Barrels

Torque ing flash hider

reduced loads