Upper wont line up with lower

5/22/2013 10:30:19 PM

Have a noveske gen 2 lower and a larue upper wont seat on the noveke lower?had the larue on other lowers works fine.. Suggestions?

ANOTHER A2 sight question

5/21/2013 1:36:19 PM

I have an A2 upper. I am removing the front sight base from a 14.5 in barrel and using a full length 15in free float rail (would have been same height as a flattop) what type/height of sight on the rails will work with the rear A2 carry handle si...

A2 Colt Stock

5/21/2013 11:42:23 AM

Where can I get a Colt A-2 stock?

Vietnam Era Upper

5/19/2013 10:07:17 PM

I came across one of the kits that are advertised by several online sellers that was a Colt M16 kit without the barrel. I put a 16" barrel on it and I have come up with a problem. I have checked the front sight that came with the kit and the sight...

New member new 1st AR build

5/17/2013 5:25:23 PM

Hi, All- I'm a recent convert to the AR-15 platform- always was a traditionalist/wood-stocked rifle type of guy... until I picked up a few, and started to get a grasp of the sense that the modular concept made. So I decided to build one.

AR bolt A1 vs A2 bolt and BCG

5/17/2013 8:59:26 AM

Hello, I'm sorry to ask a dumbass question--I googled & searched--I think the answer is obvious, which is why I can't find anything..... Is an A1bolt and BCG the same as an A2? I know the difference between an AR & M16 BC...

A2 Upper W O Forward Assist

5/16/2013 2:45:56 PM

I have not seen an upper like this before. http://www.gunbroker.com/Auction/ViewItem.aspx?Item=340627240 Any thoughts?

M16A2s with collapsible stocks

5/12/2013 8:01:15 PM

So, I now have photographic evidence of an M4 stock on an issued M16A2 rifle, which means my OCD now justified the installation of a telescopic stock on my A2 clone. (it's my only rifle and will be for awhile). However, I only have one photo, and ...

A2 dissipator upper

5/12/2013 7:13:01 AM

Any source for these or an I going to have to build one ?

what are these markings

5/7/2013 10:53:32 PM

ok so i picked up a a2 upper receiver from a buddy of mine and he believes it is a colt upper but isn't 100% sure. The markings is a B and then an M with a upsidedown triangle over it here is a picture, sorry its blurry my phone woul...

Question about a Colt lower

5/5/2013 5:59:39 PM

I recently purchased a Colt lower marked with the following : AR-15 COMPETITION HBAR CAL.223 Ser LCH0014xx I have found from searching threads here and on the net that is from an LE AR6700 ban era rifle. I have only been able to ...

A2 Front Sight Installed and Front Sight Build Assistance Needed

5/4/2013 8:11:22 AM

I just received after a few months my RR 16" mid-length Pencil barrel for a light weight build - I like it. The A2 sight is mounted and pined and the barrel nut is installed as is the triangular hand guard cap � but with no Delta Ring assemb...

Front sight question

5/3/2013 7:10:22 AM

Gents, I just purchased my first AR, an Armalite A2 model. It seems that the square front sight posts is awful wide. After looking around it looks like the earlier A1 sight post were a thinner round post (and I assume therefore a li...

A2 build using 80 complete lower receiver

5/1/2013 12:24:54 AM

Looking for tips, tricks, any info, web sites, etc., for using an 80% complete lower receiver for the build. Suggestions and info sharing greatly appreciated.

Source for new A2 rear site parts

4/29/2013 1:01:21 PM

I have a Colt Sporter target that I bought used, and have converted to an M16A2 clone... Now wears an A2 barrel with bayonet lug, and has a large forward assist. However, it has a generic "Match" rear site that I would ...

M4 cuts on the early M16A2

4/26/2013 1:14:53 PM

Did they exist on early A2 .mil GI rifles? Thanks.

Going to build my first A2

4/25/2013 7:31:16 PM

I am wanting an actual "truck gun". Something I really can just leave in my FJ most of the time. Something reliable and reasonably accurate, but cheaper than my other AR's. I think an A2 upper is where I am going to start. It will en...

A2 s some questions

4/23/2013 12:54:51 AM

Is a 14.5 govt barrel on an A2 upper receiver considered an 'A2" or a "M4 with a fixed handle"? What domestic commercial/LE/Gov Colt models came with a 14.5 in govt profile barrel and an A2 upper receiver? ...

My new M16A2 build

4/22/2013 10:13:34 PM

I purchased one of those surplus M16A2 complete uppers from OOW a while back and it inspired me to build one for myself. So, I picked up a Colt keyhole A2 upper and an FN M16A2 replacement barrel assembly. I have pretty much everything I need m...

In Stock A2 Upper

4/22/2013 8:15:31 PM

Looking for an A2 upper receiver so that I can build me an upper....does anyone have one they are willing to sell or know where I can find one in stock?

Looking to do a sleeper M16A2 build Advice needed on parts

4/20/2013 10:26:41 PM

So purely for the sake of originality and fun, I am starting a new build based on the M16A2. I want this rifle to look completely standard on the outside, but have premium internal components and be able to be used for competition at short and lon...

Heads up on FN A2 upper and A2 buttstock on EE

4/19/2013 6:09:33 PM

(NOT MINE) I know someone was looking for his son a while back. http://www.ar15.com/forums/t_7_159/1161338_WTS_WTT_FNMI_M16...

Pic request A2 upper with free float tube

4/19/2013 5:47:11 PM

Wondering what this would look like and my google-fu didn't bring up much but old sale threads. A1/A2 upper with free float tube and FSB

6 3 DCH sight parts into an A2 upper

4/18/2013 2:26:51 PM

The thought just came to me....as I am trying to find A2 rear sight parts online to build a stripped A2 upper. Can these parts drop into a A2 upper? I have 6/3 parts in hand, but no 8/3 parts to be found, will it work at all?

trying to identify this ar

4/13/2013 7:17:53 PM

Mods please move this if this is the wrong area. I want to build this rifle.. I have a recruitment poster Im guessing 80's(early 90s) possibly of the marines. One guy is holding a m16 with round hand guards a2 style with a 16...

What rail for a A2 build

4/13/2013 12:25:16 PM

I am sitting next to my A2 build and was pondering what rail would you guys suggest for an A2 carry handle upper? Currentl...

Bushmaster XM15 E2S 20 A2 conversion to A3 flat top rifle

4/11/2013 2:26:51 PM

Hello all. I have a Bushmaster XM15 E2S 20" A2 that I brought back in 1997. I think the time has come to bring it up to date by installing a new upper A3 flat top upper receiver to mount optics more easily. I'm looking for a A3 upper with no M4 fe...

Just finished putting this together

4/10/2013 11:36:21 PM

Been lurking here on the forums for a while. Had picked up an m16a1 parts kit at a local show a few years back and had been sitting on it. Had a spare windham weaponry lower receiver laying around so I decided to build the kit on that. Kit basi...

Looking for 20inch ss barrel

4/10/2013 5:53:55 PM

Looking to buils a mational match style a2 but i want a ss barrel 1:8 twist with a wylde chamber. Anyone know who has something like this in stock?

A2 left over parts for sale

4/8/2013 8:59:03 PM

Sorry for the inconvenience, reposted in EE. Please delete thread. Thanks for the info & direction. New EE post

AR15.Com - A2 Builds