AR15.Com - Short Barrel Rifles (SBR)

Which muzzle device for 10 5 bbl

5/24/2013 12:16:21 AM

I currently have the Flaming Pig, which replaced a PWS FCS after the concusion burst some fake boobs in the lane next to me. I was wondering how the BCM Mod 0 or the Manicore Nightbrake would work compared to the Flaming Pig? <...

SBR an AK47 or AR pistol

5/23/2013 9:24:18 PM

I would like to know what I have to do to SBR and AR and an AK pistol. I plan on doing both, I know you have to pay a $200 federal tax stamp, be 21 and register it as an NFA item. But what else? Keep in mind I am 20 right now and plan on getting i...

How long before I have to use a tax stamp

5/21/2013 10:43:08 PM

So I've been contemplating, like most on here, of putting in for my tax stamp(s). One for an SBR and suppressor at the same time. Lets say I go ahead and submit the forms, pay my dues and wait my time. 6 months or so later I have my t...

SBR build

5/21/2013 7:38:46 PM

im somewhat new to the AR15, so please bear with me ive been thinking about building a 14" or less upper, but im a bit confused about SBR/pistol lowers from what I understand anything less than 16" barrel-length MUST be mated t...

SBR upper or complete rifle

5/21/2013 7:27:09 PM

Would it be easier to just get the shorty upper or to go ahead and get the entire rifle? The wait for the stamp is not really a concern, I am more interested in which is easier...getting just the upper and having to get it engraved(?) or to go ahe...

engraving question

5/21/2013 1:00:10 PM

On the way to the engravers, for a trust I need..... Trust name complete City, state Thats all right?

10 5 Question

5/21/2013 10:06:58 AM

I have a form 1 in for a SBR and will be going with a 10.5" barrel. I will also be getting a can for this rifle. I currently have a 14.5 pinned which is annoying me bc when I do get said can I won't be able to use it on this rifle b/c of the pin...

Help me set up my new SBR

5/20/2013 8:32:40 PM

I don't know if the image will work I'm still trying to figure the image thing out. Here is what I just had buil...

What s Your Favorite Booster Muzzle Device

5/20/2013 7:31:37 PM

Please see the POLL and cast your vote. Mod: This question is very relevant to those of you in the SBR forum, but equally or more to those with...

Any reasons to NOT build a 300BLK

5/20/2013 1:22:05 PM

Ive been toying around with building a sbr a lot in the last year and im finally gonna go for it.I was set on a 10.5in 5.56 for a while but the more i read about the 300 the more i want it! the whole limited range doesnt matter to me so much becau...

BCM 12 5 10k round review

5/16/2013 10:42:04 PM

My BCM 12.5'' upper is well past the 10k round mark so I thought I would throw up a review for anyone interested. This gun originally started life as a 16'' carbine that had sat in my safe new and unfired for a year or more. When I built this gun ...

Change of caliber with change of address

5/15/2013 10:16:13 PM

I need to send in a 5320.20 for address change would it be ok to put the new caliber just on this form? And is that all I have to do to change the caliber and barrel length? Was a 9mm with 8" barrel now a 7.62 TOK with a 10" barrel ...

URX 3 1 Barrel Nut Wrench

5/15/2013 10:08:23 PM

I'm working on assembling my first SBR and in need of a URX barrel nut wrench. I'm not sure if I'll continue to utilize the URX rail system for future builds and hesitate to purchase the wrench. Any chance that one of you has a wrench...

SBR question

5/15/2013 9:50:22 PM

So i was thinking of getting an SBR and sending in for the stamp when i go to college next year so the wait will seem faster than it actually will be. Ill still technically be living with my parents, the address where all my personal mail will be...

How short is needed to balance 30oz suppressor

5/15/2013 2:56:19 PM

Should be getting a bonus at the end of the month and really looking into and SBR Want to make it look like this Pr...

2nd SBR Build advice 12 5 vs 13 7 Noveske barrel

5/14/2013 5:39:45 PM

I started building one SBR which turned into two with the Obama madness.... so I currently have a 10.5 Noveske CQB barrel on my SBR I built, now for my 2nd I am trying to build something with more velocity, for an all around gun. I started buildi...

Looking for advice on what to sbr on my cqb build please help

5/12/2013 9:03:25 PM

I've got a 20 inch m16a4 type rifle with a bipod and Nikon scope with a a2 stock and I'm looking to build a cqb/primary type rifle with my other complete lower. I just can't decide on if I want a factory Daniel defense 10.3 barrel with a mk...

Recoil system buffer question for 9mm SBR build

5/12/2013 3:08:50 PM

Right now I have a 5.56 spec PSA lower with a Geissele trigger & hammer, 9mm mag block, ramped CMMG bolt, M4 buffer tube, 5.56 buffer & spring. It runs fine with the 16" upper, but soon the stamp should be back and I am planning/researching the re...

First Stamp

5/12/2013 7:38:21 AM

Mailed the forms November 9 2012, recieved May 11 2013. Mandatory picture....

For Post 200 I give you

5/10/2013 1:11:15 PM

Pics of the new rifle. 2 new stamps received in the last week.

Can you check the status of a 5320 20

5/7/2013 1:17:58 AM

I sent a 5320.20 (interstate transport form) off for approval in the beginning of march and havnt got anything back yet. I heard they take about 6 weeks to get processed so I don't know if they even got it. Can I check the status of a 5320.20, and...

Must have barrel in hand before form is sent off

5/5/2013 9:49:49 PM

If I form 1 sbr one of my lowers do I have to have the barrel in hand or can I get a measurement and put it down on the form and buy it while I wait,Or get one of my barrels chopped while I wait. Also is the oal of my rifle with the flash hi...

I got SBR fever

5/4/2013 9:48:18 PM

My latest project. Currently configured with a 10.5" RRA 9mm upper with a Strikefire red dot. I will eventually go with a shorter barrel. I have a YHM XL can bought. That one seems to be Hollywood quiet with subsonics from the YouTube videos I've ...