AR15.Com - Silencers - Build It Yourself

Harrison gear E brake

4/23/2024 12:44:30 PM

Did anyone else back before all these new rules use a Harrison Gear E break? I have an aluminum one that I have been using ...

Where to find a cheaper griffin taper mount

3/8/2024 8:17:08 PM

I need a cheap basic griffin taper mount in 20 tpi, I think? The same thread as the old mag lights.My handguard is about&nbs...

modify an existing 22 form 1 suppressor

3/2/2024 5:42:21 PM

I think my .22 suppressor at 7.5" could be shorter and still be effective and a bit handier. Is there a legal way to modi...

Looking for a hub threaded stub for flash can

2/29/2024 12:54:22 PM

Anyone know where I can get a 2-3 inch threaded tube to put on an extra mount to use as a flash can/thread protector?

my new Form 1 300BO suppressor

2/14/2024 3:51:06 PM

1.5", .065 wall SS tube, 1st baffle is steel cone, then 3 aluminum K baffles, I used a piece of 1.25" aluminum tube to make&nbs...

Cone notches

2/1/2024 3:19:38 AM

Regarding the clips or notches that are put on cone shaped baffles, why? If you need more gas going past, why not have a ...

Is there a comprehensive thread regarding diy Form 1 e filing

1/28/2024 9:51:58 PM

Have a couple builds coming up hopefully this year and I'd like to try e-filing this go-round. I did the paper form last time (...

Deep pocket rimfire cones

1/27/2024 5:36:26 PM

Has anyone tried these out yet? https://xrtengineered.com/shop/1-025%e2%80%b3-modular-valve-spring-retainersWhat would be the recommended clipping and porting for t...

Thread locker for end caps

1/26/2024 1:08:04 PM

Years back I did a form 1 build using an SDTA threaded adapter to a Griffin taper lock end cap. Seems that those two don�...

form 1 approval time

1/11/2024 4:34:25 PM

Submitted my eForm1 12/23/23. approval came in today 1/11/24

thread together rifle can send it or weld

1/10/2024 6:11:36 PM

Would you trust a rifle can that just threaded together? As in, the end cap threaded to the tube, and the QD mount threaded int...

Sharing a good deal on D cell tubes

1/3/2024 1:18:25 AM

I like a good deal myself, so sharing when I find one- XRT Engineered has a couple options for D cell tubes, albeit they are&nb...

Looking for a machine fab for 11 16x24 to xeno adapter

1/2/2024 9:45:11 PM

I already contacted dead air, and ECCO; they wont do it. I want to use xeno Primal on one can for 5.56, 7.62, and 45-70; w...

Form 1 Suppressor

12/20/2023 4:19:00 AM

I did not notice this before submitting a Form 1..But in box D was somehow auto filled in as " .22 Caliber Suppressor" I myself...

Preferred or Recommended HUB Bravo Pistol Booster

12/19/2023 7:52:51 PM

Lots of different options from $150-250 ish.Is there a preferred pistol booster you guys have had success with?1/2" x 28 common&nbs...

What Suppressors fit onto the Vltor 5C1

12/17/2023 11:24:48 AM

Which fit onto a Vltor 5C1 and do any fit the BCM brake/FH?Thanks guys!

What Needs to Be Printed on the Tube When U Built a Suppressor

12/17/2023 11:21:14 AM

I'm building my own suppressor and I'm in the process of it, I'm curious as to what needs to be engraved on to the tube to...

I have a Form 1 in hand design my suppressor for me

12/6/2023 1:26:04 AM

Its getting embarrassing... but I've had this form 1 approved for awhile now. I need to get off my ass and just build it ...

ATF New Rule

12/2/2023 12:18:17 PM

So I just ran across the new ARFCOM vid going over the rule change(again). How exactly does this apply to current F1s, and i...

Need Tube to Finish Kit OD ID 1 500 x 1 375 24tpi threads

11/18/2023 4:03:34 PM

I need to source a tube to finish my kit (approved Form 1 in hand), but am having a heck of a time finding the right ...

Is there a legal way to work on a manufactured suppressor

11/10/2023 5:00:40 PM

I have an M4-2k from back in the day that I want to convert to a different mounting system. Is there a legal way for ...

Minimum endcap aperture diameter for 9mm can

11/10/2023 5:08:52 AM

What is generally considered the narrowest endcap you can go with for a 9mm can on a fixed barrel host like a MP5 or AR9? ...

Can you do EFT electronic fingerprints when submitting a Form 1 online

11/7/2023 4:19:08 PM

Can you do EFT electronic fingerprints when submitting a Form 1 online?

Thinking about building my own suppressor on Form1

10/12/2023 4:44:59 PM

Not sure if this is the right place to put this, and yes - I ran a search for this before posting... Mods please lock&nbs...

D Cell tubes mounts end caps Can you guys help

10/2/2023 2:49:01 PM

I've been itching to start another Form 1 submission, and want to keep it compatible with my Griffin mounts.I know the mount from...

Form 1 9mm 35 cal rifle can suggestions

10/2/2023 6:42:27 AM

I wouldnt mind having a can for some .35 cal rifles. For now it would be limited to a 16 357 maximum but might also be&nbs...

Looking for both ends of a QD DIY 9mm silencer

9/25/2023 9:57:54 PM

I'd like the concept of the QD. I don't think I've seen the silencer end for sale? If you can tell me where to go, as ...

It s been a fun day with new approvals

9/21/2023 1:30:06 AM

I now know that the following are valid reasons to want to build a supressor. - Chicks Dig Silence- Addicted to Whisper Pickles

17 4 SS and 6Al 4V Ti round bar drops available

9/14/2023 1:12:48 AM

If this is a no-go in this tech forum, I apologize and please delete. Just want to let our Form 1 crowd know we hav...

Pulled the trigger on a mini lathe

9/9/2023 10:45:05 AM

So ended up pulling the trigger on a mini lathe. Going to start getting the tooling ready to go. I still planning on getting a&...