User Panel
User Panel
User Panel
|
Posted: 1/11/2023 8:00:27 PM EDT
[#1]
Quote HistoryOriginally Posted By coldblue: Just get it down as low as possible: https://www.ar15.com/media/mediaFiles/19411/SCR_Leupold_PRW_Low_jpg-2668350.JPG I went with a set of Warne low rings for my Leupold VX3HD 30mm w/1.63” eyepiece. I ended up with 0.025” of clearance between the eyepiece and the pic rail on the upper. The scope will likely be offset back to account for eye relief, so you could probably go even lower. Be careful if you’re using a Gibbz upper like a lot of folks, as the trap door in the back needs clearance to allow the BCG to slide in/out. If you don’t have a high enough setup you’ll probably be taking the scope off every time you want to pull the bolt out… There is just enough to space in the photo below for the BCG to come out (standard BCG for illustration). 
|
|
|
|
|
Posted: 1/21/2023 12:30:20 PM EDT
[Last Edit: Edge-To-Life]
[#2]
Quote HistoryOriginally Posted By coldblue: Just get it down as low as possible: https://www.ar15.com/media/mediaFiles/19411/SCR_Leupold_PRW_Low_jpg-2668350.JPG  Attached FileOriginally bought a Razor for it but the bell was too big with Larue Ultra Low rings. Had to swap scopes. I’m still going to buy a cheek rest I think |
|
|
|
USA
|
Posted: 2/8/2023 6:50:00 PM EDT
[#3]
The polymer stock SCR lowers are now available. Been waiting for one..
https://fightlite.com/scr-rifle-lower-black-polymer |
|
|
|
Posted: 2/8/2023 7:57:14 PM EDT
[Last Edit: Castillo]
[#4]
Quote HistoryOriginally Posted By tokarz1: The polymer stock SCR lowers are now available. Been waiting for one.. https://fightlite.com/scr-rifle-lower-black-polymer Damn, those looks good 
|
|
|
|
|
Posted: 2/9/2023 11:04:57 AM EDT
[#5]
Quote HistoryOriginally Posted By tokarz1: The polymer stock SCR lowers are now available. Been waiting for one.. https://fightlite.com/scr-rifle-lower-black-polymer Just placed my order. 
|
|
|
|
OK, USA
|
Posted: 2/9/2023 3:35:35 PM EDT
[#6]
Quote HistoryOriginally Posted By tokarz1: The polymer stock SCR lowers are now available. Been waiting for one.. https://fightlite.com/scr-rifle-lower-black-polymer Ordered mine yesterday. |
|
|
|
Posted: 2/22/2023 6:05:50 PM EDT
[#7]
Received mine today
|
|
|
|
OK, USA
|
Posted: 2/24/2023 1:30:46 PM EDT
[#8]
Received my stock a couple days ago and installed it today. Now I have an Ares SCR with a Fightlite stock.
Overall, I am pleased. Ergonomics are better than the Remington stock. Cheekweld is perfect for lining up on a low mounted optic (in this case a Sig Romeo 4T) and also improved with offset back up sights (in this case Magpul Pro sights). I didn't compare the weight between stocks, but the new one is marginally heavier. It was easier to install because it is wider than the Remington stock. Buttpad is rubber with aggressive texturing to stick to the shoulder. It probably will absorb some recoil - though the SCR's recoil is already almost non-existant. The texture on the grip is also excellent and an included sling stud on both sides is a bonus. I have to admit I've had a love/hate relationship with this company and I am surprised to have had a positive customer experience in this instance. |
|
|
CA, USA
|
Posted: 3/22/2023 12:40:31 AM EDT
[#9]
Hi guys! Is the Scr trigger group billet, forged, or cast?
-Sam |
|
|
|
Posted: 4/6/2023 3:21:36 PM EDT
[#10]
My built up version of a 350 Legend
|
|
|
|
OK, USA
|
Posted: 4/6/2023 10:23:47 PM EDT
[#11]
Nice Legend. How you liking the stock? I am really liking mine - a big improvent over the Remington one.
|
|
|
OK, USA
|
Posted: 4/6/2023 10:24:27 PM EDT
[#12]
Quote HistoryOriginally Posted By h1tm4n: Hi guys! Is the Scr trigger group billet, forged, or cast? -Sam I have no idea but I would suspect it is cast. |
|
|
|
Posted: 4/9/2023 10:17:49 AM EDT
[#13]
Here’s mine in 450 Bushmaster.
|
|
|
|
USA
|
Posted: 4/18/2023 9:11:46 PM EDT
[#14]
Quote HistoryOriginally Posted By Goody454: Here’s mine in 450 Bushmaster. https://i.ibb.co/7K4CPkm/B08-A5-BB7-88-DA-4-B3-A-9611-440-BAAB928-C3.jpg She is a beauty! |
|
|
|
Posted: 4/18/2023 9:16:36 PM EDT
[#15]
Quote HistoryOriginally Posted By Goody454: Here’s mine in 450 Bushmaster. https://i.ibb.co/7K4CPkm/B08-A5-BB7-88-DA-4-B3-A-9611-440-BAAB928-C3.jpg What rail is that? |
|
|
|
|
Posted: 4/19/2023 7:07:01 AM EDT
[#16]
Thanks!
It’s a BCM MCMR 13 |
|
|
|
OK, USA
|
Posted: 4/19/2023 5:53:58 PM EDT
[#17]
Quote HistoryOriginally Posted By Goody454: Thanks! It’s a BCM MCMR 13 Looks really good. |
|
|
|
Posted: 4/19/2023 8:11:11 PM EDT
[#18]
I appreciate the comments. It’s my modern day Remington 740
|
|
|
|
MO, USA
|
Posted: 5/1/2023 8:05:57 AM EDT
[#19]
So since I'm new here, might as well contribute to this picture thread with my honest-to-goodness SCR "pistol" build, since .458 SOCOM loves such short barrels.
 10" "retro" profile Tromix .458 barrel/bolt, swapped the pins for Yankee Hill ones so it's a lot easier to pop the upper off, Cross Machine Tools upper and a SeeAll open sight since it's the most slim-line usable sight I could actually acquire. Went with the gen-1 SeeAll to keep it streamlined. It's short and light enough to shoot one handed with good accuracy out to about 25 yards. |
|
|
|
Posted: 5/1/2023 1:39:31 PM EDT
[#20]
Quote HistoryOriginally Posted By WolfWings: So since I'm new here, might as well contribute to this picture thread with my honest-to-goodness SCR "pistol" build, since .458 SOCOM loves such short barrels. https://i.imgur.com/tApvhmA.jpg 10" "retro" profile Tromix .458 barrel/bolt, swapped the pins for Yankee Hill ones so it's a lot easier to pop the upper off, Cross Machine Tools upper and a SeeAll open sight since it's the most slim-line usable sight I could actually acquire. Went with the gen-1 SeeAll to keep it streamlined. It's short and light enough to shoot one handed with good accuracy out to about 25 yards. it needs a blunderbuss bell end muzzle device |
|
|
|
USA
|
Posted: 5/1/2023 2:15:06 PM EDT
[#21]
Are the safeties reversible for the sinister handed among us?
|
|
|
MO, USA
|
Posted: 5/13/2023 8:33:35 AM EDT
[#22]
Quote HistoryOriginally Posted By doc_Zox: it needs a blunderbuss bell end muzzle device Trust me, I looked. XD All the ones out there don't support larger than .308 that I could find, .458's a Big Boy and muzzle devices do NOT like him. 
|
|
|
|
Posted: 5/13/2023 9:01:40 AM EDT
[#23]
Quote HistoryOriginally Posted By maxxmojo: I got one for the exact same reason. I really like this profile for a general purpose/hunting rig. Quote HistoryOriginally Posted By maxxmojo: Originally Posted By Goody454: I’ve been on the fence about one of these for a while, but the sale pushed me over the edge. I just ordered a Walnut lower for my 450 to live on. Free-state dweller, and I don’t see this as an AR-alternative so much as a cool semi auto deer/pig rifle. I got one for the exact same reason. I really like this profile for a general purpose/hunting rig. Plus the fact it takes AR15 uppers, shares small parts and mags doesn't hurt either. 
|
|
|
|
|
Posted: 5/13/2023 10:39:33 AM EDT
[#24]
|
|
|
|
MO, USA
|
Posted: 5/17/2023 3:09:01 PM EDT
[#25]
Quote HistoryOriginally Posted By doc_Zox: Tromix for all the things https://tromix.com/product/linear-compensator-muzzle-brake/ Oh I meant more I was trying to find something closer to the 'cookie cutter' style "giant SHORT disc" style muzzle devices to slap on the end, not just adding another 3 inches of slightly thicker barrel. |
|
|
WI, USA
|
Posted: 5/18/2023 1:22:15 PM EDT
[#26]
Wish they'd come out with a large frame version. One of these in 308 would be amazing.
|
|
|
USA
|
Posted: 7/27/2023 7:00:31 AM EDT
[#27]
Bump for more interesting builds.
|
|
|
CA, USA
|
Posted: 9/16/2023 1:16:35 AM EDT
[#28]
Hey everyone, new SCR owner! Here she is alongside a Ruger Mini-14.
|
|
|
OK, USA
|
Posted: 9/16/2023 11:19:56 AM EDT
[#29]
Very nice.
As a new owner, you may want to invest in an ambi mag release to improve functionality. Here is the one I installed: https://battlesteel.com/ambidextrous-magazine-release-2-0/ |
|
|
|
Posted: 9/16/2023 11:57:57 AM EDT
[#30]
|
|
|
|
NC, USA
|
Posted: 9/16/2023 12:37:21 PM EDT
[Last Edit: 9D1Alpha]
[#31]
Quote HistoryOriginally Posted By NorthPolar: FM is putting outa similar version soon. Here’s the link what it looks like. https://www.ar15.com/media/mediaFiles/207715/IMG_2054_jpeg-2955786.JPG While they're at it an AK magwell version would be interesting....and plywood buttstock * plus reciprocating sidecharger ...a wwsd 1946 |
|
|
|
Posted: 9/16/2023 3:18:18 PM EDT
[Last Edit: doc_Zox]
[#32]
 This Foxtrot Mike non buffer tube lower and front charging upper will need it's own thread |
|
|
|
|
Posted: 9/16/2023 3:20:32 PM EDT
[#33]
|
|
|
|
NC, USA
|
Posted: 9/16/2023 4:37:50 PM EDT
[#34]
Quote HistoryOriginally Posted By doc_Zox: https://www.ar15.com/media/mediaFiles/3097/D927D98D-FAF1-4182-A730-27BA6DC3A1D6-2956074.jpg This Foxtrot Mike non buffer tube lower and front charging upper will need it's own thread Looking forward to more info . Very curious about that FCG |
|
|
|
Posted: 9/16/2023 4:55:12 PM EDT
[#35]
Quote HistoryOriginally Posted By doc_Zox: https://www.ar15.com/media/mediaFiles/3097/D927D98D-FAF1-4182-A730-27BA6DC3A1D6-2956074.jpg This Foxtrot Mike non buffer tube lower and front charging upper will need it's own thread That’s pretty cool. Still won’t be able to buy it in WA.  Glad I got my SCR when I did. |
|
|
|
|
Posted: 9/16/2023 6:52:33 PM EDT
[#36]
Quote HistoryYES |
|
|
|
|
Posted: 9/16/2023 7:30:12 PM EDT
[#37]
My Fightlite lower is on Gunbroker (with bids). I didn’t like the feel of the walnut stock grip angle and couldn’t bring myself to buy an original 1100 Monte Carlo stock to fix things…
If FM makes this in 450 Bushmaster I will be all over it. |
|
|
|
|
Posted: 9/16/2023 8:26:53 PM EDT
[Last Edit: Boomer]
[#38]
Quote HistoryOriginally Posted By Goody454: My Fightlite lower is on Gunbroker (with bids). I didn’t like the feel of the walnut stock grip angle and couldn’t bring myself to buy an original 1100 Monte Carlo stock to fix things… If FM makes this in 450 Bushmaster I will be all over it. I don’t know that it would solve your problem or not, but FM apparently also has an adapter to mount a Magpul stock on a SCR lower.  Attached File |
|
|
|
|
Posted: 9/16/2023 10:37:00 PM EDT
[#39]
Quote HistoryOriginally Posted By Boomer: I don’t know that it would solve your problem or not, but FM apparently also has an adapter to mount a Magpul stock on a SCR lower. https://www.ar15.com/media/mediaFiles/2117/IMG_1346_jpeg-2956394.JPG If only I’d known this 2-days ago… Oh well. I have 3 more 450’s anyway |
|
|
|
|
Posted: 9/17/2023 8:02:36 AM EDT
[Last Edit: HipSh0T]
[#40]
that looks excellent with the Magpul stock...
|
|
|
|
|
Posted: 9/17/2023 6:14:16 PM EDT
[Last Edit: doc_Zox]
[#41]
Quote HistoryOriginally Posted By Boomer: I don't know that it would solve your problem or not, but FM apparently also has an adapter to mount a Magpul stock on a SCR lower. https://www.ar15.com/media/mediaFiles/2117/IMG_1346_jpeg-2956394.JPG |
|
|
|
|
Posted: 9/17/2023 6:25:55 PM EDT
[Last Edit: doc_Zox]
[#42]
 foxtrotmikeproducts We are proud to announce that our much appreciated Ranch Rifle will be available end of October! Our Ranch Rifle will be offered in a variety of different calibers! Intended to serve the needs of hunters, ranchers, hikers, and farmers alike! Sign up for our email list to get all the latest news first! |
|
|
|
|
Posted: 9/17/2023 6:26:11 PM EDT
[#43]
Quote HistoryOriginally Posted By doc_Zox: That's an FTM upper on a SCR lower, so the recoil system is in the upper, not in the stock But you still need a small adapter to allow for the stock to bolt to the lower. It replaces the recoil parts. I've made the adapter for several years and it seems everyone is in the adapter game now. |
|
|
|
OK, USA
|
Posted: 9/19/2023 10:54:22 PM EDT
[Last Edit: SCR556]
[#44]
Quote HistoryOriginally Posted By BradN: But you still need a small adapter to allow for the stock to bolt to the lower. It replaces the recoil parts. I've made the adapter for several years and it seems everyone is in the adapter game now. Yeah, but I think the SCR is still the better product with your mod than the FM design. |
|
|
|
Posted: 9/19/2023 11:13:40 PM EDT
[#45]
FM said theirs are starting at $1000 complete and will take BRN-180 uppers as well. Kinda tempting so long as the trigger isn’t a mess. A 7.62x39 could be fun.
|
|
|
|
USA
|
Posted: 12/4/2023 11:09:38 PM EDT
[#46]
Bump before it gets archived.
|
|
|
|
Posted: 12/27/2023 9:21:43 AM EDT
[#47]
Bump before it gets archived.
|
|
|
|
CA, USA
|
Posted: 2/3/2024 3:33:19 AM EDT
[#48]
Where can I send a bear creek side charger upper to get it cut into a firelighte scr bcg?
|
|
|
|
Posted: 2/3/2024 4:55:23 AM EDT
[#49]
Quote HistoryOriginally Posted By dontsh00tmesanta: Where can I send a bear creek side charger upper to get it cut into a firelighte scr bcg? You use a SCR bolt carrier in the Bear Creek upper receiver. You just need to have a couple of holes drilled and tapped in the SCR bolt carrier for the Bear Creek side charging handle. |
|
|
|
NY, USA
|
Posted: 3/4/2024 10:04:31 PM EDT
[#50]
FM told me they don't have an adapter for the SGA stock. They said it just fits their lower.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
