User Panel
“When the people fear their government, there is tyranny; when the government fears the people, there is liberty.” Thomas Jefferson
|
Looking for Springfield Armory M1 # 2,518,695
NRA Life Member GCA Member Zanesville Rifle Club Ohio Rifle and Pistol Association |
|
Originally Posted By bm3:
Out with the old and in with the new. This set up take up half the space than my old benches so now I have more room. http://i1176.photobucket.com/albums/x332/Mike_Boles/970B42F1-3665-4D08-9E67-DE50C3593A1F_zps83phvf17.jpg View Quote Nice looking setup. I always enjoy seeing what other "stuff" is around the bench. I think this the first Vader mask I have seen. |
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By MrFluffaluffagus: Finally getting around to setting up my press and bench, been collecting equipment over the past year while reading through The ABC's of Reloading. I feel comfortable enough with the basics that I feel it's time to get some hands on experience. Quick question, as a right-hander who wants to keep their hand on the handle as much as possible how much/little room on the bench do I need for the LnL AP? I'd like to get it as far over as possible to make room to mount the single stage on the left. http://i.imgur.com/slvwocK.jpg?1 View Quote I have my single stage on the far right, progressive in the middle. Bullet puller in SS. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By ramesrames:
Portable press, done today :) Will attach some plastic bins. http://i1381.photobucket.com/albums/ah236/david_gigauri/Mobile%20Uploads/IMG_20150913_185204_zpsnowm0stf.jpg View Quote Haven't seen a portable reload stand in a while. As the king of portable reloading stands I approve of this post. |
|
|
RIP brother Wes you will be missed
nosce te ipsum Member of the Fantastic Bastards LOTD |
Originally Posted By MrFluffaluffagus:
Finally getting around to setting up my press and bench, been collecting equipment over the past year while reading through The ABC's of Reloading. I feel comfortable enough with the basics that I feel it's time to get some hands on experience. Quick question, as a right-hander who wants to keep their hand on the handle as much as possible how much/little room on the bench do I need for the LnL AP? I'd like to get it as far over as possible to make room to mount the single stage on the left. http://i.imgur.com/slvwocK.jpg?1 View Quote I'd suggest about 6" to the right as a minimum, preferably more like 12". To the left, you need about the same amount. You won't actually use that space much of the time, but to access everything, you'll want the clear space. |
|
"--you can't conquer a free man; the most you can do is kill him."
Heinlein NRA Life Member Glock Certified Armorer Certified AR15 Armorer Certified M1911 Armorer |
Life Member:
National Rifle Association Gun Owners of America Grass Roots North Carolina North Carolina Rifle and Pistol Association |
Originally Posted By snowshooter:
Nice looking setup. I always enjoy seeing what other "stuff" is around the bench. I think this the first Vader mask I have seen. View Quote View All Quotes View All Quotes Originally Posted By snowshooter:
Originally Posted By bm3:
Out with the old and in with the new. This set up take up half the space than my old benches so now I have more room. http://i1176.photobucket.com/albums/x332/Mike_Boles/970B42F1-3665-4D08-9E67-DE50C3593A1F_zps83phvf17.jpg Nice looking setup. I always enjoy seeing what other "stuff" is around the bench. I think this the first Vader mask I have seen. Don't let the mask fool you ..........I am not your father. |
|
|
Originally Posted By Cixelsyd:
I claimed a weird shaped room upstairs for my loading/fun room. It is a long rectangle with pretty much only one wall. http://www.carolinashootersclub.com/styles/default/xenforo/clear.png I've got the bench on that side and used the short wall for some storage racks. http://img.photobucket.com/albums/v108/Chrissopher/funroom1r_zps8jlxdwpo.jpg http://img.photobucket.com/albums/v108/Chrissopher/funroom2r_zpsozffssc1.jpg I've got a Hornady LNL, Dillon 650, and an RCBS turret mounted up to bench. CHRIS View Quote Nice use of space. |
|
"--you can't conquer a free man; the most you can do is kill him."
Heinlein NRA Life Member Glock Certified Armorer Certified AR15 Armorer Certified M1911 Armorer |
Originally Posted By GHPorter:
Nice use of space. View Quote View All Quotes View All Quotes Originally Posted By GHPorter:
Originally Posted By Cixelsyd:
I claimed a weird shaped room upstairs for my loading/fun room. It is a long rectangle with pretty much only one wall. http://www.carolinashootersclub.com/styles/default/xenforo/clear.png I've got the bench on that side and used the short wall for some storage racks. http://img.photobucket.com/albums/v108/Chrissopher/funroom1r_zps8jlxdwpo.jpg http://img.photobucket.com/albums/v108/Chrissopher/funroom2r_zpsozffssc1.jpg I've got a Hornady LNL, Dillon 650, and an RCBS turret mounted up to bench. CHRIS Nice use of space. +1. That's a cool reloading area. |
|
|
Originally Posted By gotfish:
I remembered looking through this thread a while back, and now that my own space is almost complete, I thought I'd share. I built this in the process of finishing my basement, and it was designed as a gun room from day one. I wanted a room that I could lock securely to avoid prying eyes from my kids and their friends as they get older and start to hang out in the basement just outside. The room is built with 12" on center framing, with a layer of 3/4" plywood on all sides under the outer layer of drywall. The entire room is insulated, with no windows. It has a HVAC supply in the ceiling that I can close completely if desired. It has flush mounted Polk Audio speakers in the ceiling, and all lighting (recessed, track and under cabinet) is LED. The room has a steel entry door hung in a steel frame, with a secure keyed lock and deadbolt. I am a remodeling contractor specializing in higher end kitchens, so the cabinetry layout (for me) was a pretty easy design which would allow me to keep most things inside cabinets. The granite and tile were both given to my by suppliers, and I am the cabinet dealer. The drawers on the lower left side are filled with reloading manuals, tools, spare parts, etc. The main cabinet under the Dillon 550 is filled to capacity with factory ammo in military-style ammo cans. The upper cabinets above the bench store powder, primers, and projectiles separated by caliber (I load 9mm, 45, and .223). I have a safe coming that will also be in this room, and the rifles will go into the safe once it arrives. This is my man cave. This is my happy place. Pics: <a href="http://www.smugmug.com/gallery/n-Sd8xj/i-QRTsGm9/A" target="_blank">http://www.smugmug.com/photos/i-QRTsGm9/0/L/i-QRTsGm9-XL.jpg</a> <a href="http://www.smugmug.com/gallery/n-Sd8xj/i-B5KsGvp/A" target="_blank">http://www.smugmug.com/photos/i-B5KsGvp/0/L/i-B5KsGvp-XL.jpg</a> <a href="http://www.smugmug.com/gallery/n-Sd8xj/i-mGXjr4c/A" target="_blank">http://www.smugmug.com/photos/i-mGXjr4c/0/L/i-mGXjr4c-XL.jpg</a> View Quote What toe kick depth do those cabinets have? I thought about building a bench based on stock cabinets, but they all had less depth there than I wanted, so I just went with a 2x4-based construction. Your pictures remind me that I need to clean up my bench. |
|
"--you can't conquer a free man; the most you can do is kill him."
Heinlein NRA Life Member Glock Certified Armorer Certified AR15 Armorer Certified M1911 Armorer |
Originally Posted By GHPorter:
I'm jealous! In South Central Texas, it takes blasting to excavate for a basement, so that's not an option around here. What toe kick depth do those cabinets have? I thought about building a bench based on stock cabinets, but they all had less depth there than I wanted, so I just went with a 2x4-based construction. Your pictures remind me that I need to clean up my bench. View Quote The toe-kick depth is about 3" from the cabinet's front, add another 7/8" for the door thickness. I didn't specify anything specific here, but I would think that a decent cabinet company could set this back further if the client requested it. I know this line would do so with no up-charges. |
|
"My greatest fear is that one day I will die and my wife will sell my guns for what I told her I paid for them!" Author Unknown
|
Originally Posted By gotfish:
The toe-kick depth is about 3" from the cabinet's front, add another 7/8" for the door thickness. I didn't specify anything specific here, but I would think that a decent cabinet company could set this back further if the client requested it. I know this line would do so with no up-charges. View Quote View All Quotes View All Quotes Originally Posted By gotfish:
Originally Posted By GHPorter:
I'm jealous! In South Central Texas, it takes blasting to excavate for a basement, so that's not an option around here. What toe kick depth do those cabinets have? I thought about building a bench based on stock cabinets, but they all had less depth there than I wanted, so I just went with a 2x4-based construction. Your pictures remind me that I need to clean up my bench. The toe-kick depth is about 3" from the cabinet's front, add another 7/8" for the door thickness. I didn't specify anything specific here, but I would think that a decent cabinet company could set this back further if the client requested it. I know this line would do so with no up-charges. The thick cabinet doors make the difference. I have big feet, so I need a little extra space for my toes... Prefinished cabinets, I assume? How's the granite holding up? |
|
"--you can't conquer a free man; the most you can do is kill him."
Heinlein NRA Life Member Glock Certified Armorer Certified AR15 Armorer Certified M1911 Armorer |
Yep - cabinetry is built and finished in PA by Brookhaven. The granite has been great - it was tough to drill through for the Dillon mounting system, but otherwise it's been great. My fabricator gave me a leftover island top that I had to cut down to fit here. I could have paid them to cut it & drill the holes, but I thought "how hard could it be?" If I had it to do over, I'd write the check!
|
|
"My greatest fear is that one day I will die and my wife will sell my guns for what I told her I paid for them!" Author Unknown
|
Originally Posted By GTO688:
Here are some photos of my bench with insert system. The top is built from 3 sheets of 3/4 inch plywood. The top sheet is birch laminated plywood which is stained and finished with polyurethane. http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0631.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0629.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0626.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0625.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0627.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0628.jpg http://i1133.photobucket.com/albums/m595/gto688/Reloading%20forum/DSCN0624.jpg GTO688 View Quote Man thats awesome, well done! |
|
|
Originally Posted By perimedik:
my "portable" set up when I am at work. http://i240.photobucket.com/albums/ff170/perimedik/100_4689.jpg View Quote Nice! |
|
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By Bcamp15: My dad and I finally got everything built and setup how we want it. We are beginners so it will definitely suffice for now. http://i1362.photobucket.com/albums/r681/bcamp151/Mobile%20Uploads/20151025_131327_zps0ldadwvg.jpg View Quote It's a good idea to have the scale at eye level, but I advise you build sturdy shelf's. Your shelf will not be stable when resizing, gravity is not a secure fastener on a reloading bench.. Also bolt bench to wall studs with angle brackets. How I mounted my powder measure/trickler. Notice powder measure just to the right for good work flow. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By dryflash3:
Thats a good start. It's a good idea to have the scale at eye level, but I advise you build sturdy shelf's. Your shelf will not be stable when resizing, gravity is not a secure fastener on a reloading bench.. Also bolt bench to wall studs with angle brackets. <a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210759.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210759.jpg</a> How I mounted my powder measure/trickler. Notice powder measure just to the right for good work flow. View Quote View All Quotes View All Quotes Originally Posted By dryflash3:
Originally Posted By Bcamp15:
My dad and I finally got everything built and setup how we want it. We are beginners so it will definitely suffice for now. http://i1362.photobucket.com/albums/r681/bcamp151/Mobile%20Uploads/20151025_131327_zps0ldadwvg.jpg Thats a good start. It's a good idea to have the scale at eye level, but I advise you build sturdy shelf's. Your shelf will not be stable when resizing, gravity is not a secure fastener on a reloading bench.. Also bolt bench to wall studs with angle brackets. <a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210759.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210759.jpg</a> How I mounted my powder measure/trickler. Notice powder measure just to the right for good work flow. Thanks for the advice. I will probably do a wall mounted shelf for the scale. |
|
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Welcome to the Forum and our hobby.
|
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By dryflash3:
<a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210756.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210756.jpg</a> I have my single stage on the far right, progressive in the middle. Bullet puller in SS. View Quote View All Quotes View All Quotes Originally Posted By dryflash3:
Originally Posted By MrFluffaluffagus:
Finally getting around to setting up my press and bench, been collecting equipment over the past year while reading through The ABC's of Reloading. I feel comfortable enough with the basics that I feel it's time to get some hands on experience. Quick question, as a right-hander who wants to keep their hand on the handle as much as possible how much/little room on the bench do I need for the LnL AP? I'd like to get it as far over as possible to make room to mount the single stage on the left. http://i.imgur.com/slvwocK.jpg?1 <a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210756.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210756.jpg</a> I have my single stage on the far right, progressive in the middle. Bullet puller in SS. I am just going to take a guess and say you like TAC. It's good stuff but hard to fine in my neck of the desert |
|
Sa/oU Home Of The Brave
Teener Crew For Life Wesley Sindelar (I-M-A-WMD) RIP |
Originally Posted By ontime1969:
I am just going to take a guess and say you like TAC. It's good stuff but hard to fine in my neck of the desert View Quote View All Quotes View All Quotes Originally Posted By ontime1969:
Originally Posted By dryflash3:
Originally Posted By MrFluffaluffagus:
Finally getting around to setting up my press and bench, been collecting equipment over the past year while reading through The ABC's of Reloading. I feel comfortable enough with the basics that I feel it's time to get some hands on experience. Quick question, as a right-hander who wants to keep their hand on the handle as much as possible how much/little room on the bench do I need for the LnL AP? I'd like to get it as far over as possible to make room to mount the single stage on the left. http://i.imgur.com/slvwocK.jpg?1 <a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210756.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210756.jpg</a> I have my single stage on the far right, progressive in the middle. Bullet puller in SS. I am just going to take a guess and say you like TAC. It's good stuff but hard to fine in my neck of the desert |
|
If I don't respond to your comment, you're on ignore.
RIP Grin! 10/09/2015 |
Sa/oU Home Of The Brave
Teener Crew For Life Wesley Sindelar (I-M-A-WMD) RIP |
Originally Posted By GSL:
Call Bill at the Trading Post in Prescott. View Quote View All Quotes View All Quotes Originally Posted By GSL:
Originally Posted By ontime1969:
Originally Posted By dryflash3:
Originally Posted By MrFluffaluffagus:
Finally getting around to setting up my press and bench, been collecting equipment over the past year while reading through The ABC's of Reloading. I feel comfortable enough with the basics that I feel it's time to get some hands on experience. Quick question, as a right-hander who wants to keep their hand on the handle as much as possible how much/little room on the bench do I need for the LnL AP? I'd like to get it as far over as possible to make room to mount the single stage on the left. http://i.imgur.com/slvwocK.jpg?1 <a href="http://s250.photobucket.com/user/dryflash3/media/550/P1210756.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/550/P1210756.jpg</a> I have my single stage on the far right, progressive in the middle. Bullet puller in SS. I am just going to take a guess and say you like TAC. It's good stuff but hard to fine in my neck of the desert Thanks for the tip. |
|
Sa/oU Home Of The Brave
Teener Crew For Life Wesley Sindelar (I-M-A-WMD) RIP |
|
VERY nice!
|
|
|
I like the stain and paint. Do you mind sharing what you used? Originally Posted By FreedomFighterKS:
Thanks for the reinforcing advice, I added them and my bench is rock solid! It is now finished and I have made my first reloads ever! Screws, paint, stain, and a little sweat. But I think it turned out alright, and the significant other approved it to go inside the house Progression pictures. http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1340_zpsgds83c92.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1344_zps4ruofugf.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1345_zpsbkwvwyqj.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1370_zps8eeqypza.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1371_zpsuchrour3.jpg View Quote |
|
|
I like the stain and paint. Do you mind sharing what you used? Originally Posted By FreedomFighterKS:
Thanks for the reinforcing advice, I added them and my bench is rock solid! It is now finished and I have made my first reloads ever! Screws, paint, stain, and a little sweat. But I think it turned out alright, and the significant other approved it to go inside the house Progression pictures. http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1340_zpsgds83c92.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1344_zps4ruofugf.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1345_zpsbkwvwyqj.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1370_zps8eeqypza.jpg http://i1081.photobucket.com/albums/j347/TheHighRoadDude/Reloading/IMG_1371_zpsuchrour3.jpg View Quote |
|
|
Originally Posted By GunsandCoffee71: Just finished my reloading room - this started as an unfinished basement area with a single light bulb and two truckloads of junk (just bought the house in Aug). The room is 20' x 16' - I did all the framing, electrical, drywall, insulation, and flooring myself. I decided to install an electronic lock on the door (36" solid pine) so I wouldn't have to worry about my youngsters wandering in when I'm away from the bench. I also built the reloading bench, hutch, and shelving units. The bench is all 2x6" construction with anti-torsion design. The shelves are also 2x6" - perhaps a bit of overkill, but I can load them up heavy. I'm doing my first run of .40 tonight..........30.06 M2 this weekend. http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4388_zpscgnngdg9.jpg http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4389_zpsgxvfehb3.jpg View Quote Very nice. Why place the heavy X-Treme bullets on the top of your shelf? The shelving unit is probably sturdy enough but heavy weights are always safer lower to the floor. |
|
Team Ranstad
----------------- I'm mean nasty & tired. I eat concertina wire & piss napalm and I can put a round through a fleas ass at 200 meters. |
Because I had already loaded up 400+ lbs of brass before I found the bullets.
I'll move it around when I get a minute - it's beyond sturdy and loaded down heavy without the bullets, so no big deal. Those shelves are fully framed 2x6s, with a center cross member, all sitting on cripples on the legs. It's not going anywhere. Originally Posted By 7:
Very nice. Why place the heavy X-Treme bullets on the top of your shelf? The shelving unit is probably sturdy enough but heavy weights are always safer lower to the floor. View Quote View All Quotes View All Quotes Originally Posted By 7:
Originally Posted By GunsandCoffee71:
Just finished my reloading room - this started as an unfinished basement area with a single light bulb and two truckloads of junk (just bought the house in Aug). The room is 20' x 16' - I did all the framing, electrical, drywall, insulation, and flooring myself. I decided to install an electronic lock on the door (36" solid pine) so I wouldn't have to worry about my youngsters wandering in when I'm away from the bench. I also built the reloading bench, hutch, and shelving units. The bench is all 2x6" construction with anti-torsion design. The shelves are also 2x6" - perhaps a bit of overkill, but I can load them up heavy. I'm doing my first run of .40 tonight..........30.06 M2 this weekend. http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4388_zpscgnngdg9.jpg http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4389_zpsgxvfehb3.jpg Very nice. Why place the heavy X-Treme bullets on the top of your shelf? The shelving unit is probably sturdy enough but heavy weights are always safer lower to the floor. |
|
|
Very nice!!!
Originally Posted By zen_grasshopper:
Added a 1050 to the bench. https://dl.dropboxusercontent.com/u/23236249/Reloading%20Room%2011%3A17%3A2015/Reloading%20bench%20550b%20and%201050.jpg https://dl.dropboxusercontent.com/u/23236249/Reloading%20Room%2011%3A17%3A2015/Ammo%20storage%20and%20tool%20box.jpg https://dl.dropboxusercontent.com/u/23236249/Reloading%20Room%2011%3A17%3A2015/Work%20Bench.jpg Since I took the pictures I have added a bit more lighting and added a used primer collector to the 1050 like on the 550b. Jon View Quote |
|
|
Ugh.
|
|
Uncle
Sam's Misguided Children |
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Hopefully we can stay on topic, which is pics of reloading benches. Where to get low cost cabinets would be better in the "where to find" tacked thread at the top of the page. Nicely finished room, shelf's and bench GunsandCoffee71. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
Originally Posted By GunsandCoffee71:
Just finished my reloading room - this started as an unfinished basement area with a single light bulb and two truckloads of junk (just bought the house in Aug). The room is 20' x 16' - I did all the framing, electrical, drywall, insulation, and flooring myself. I decided to install an electronic lock on the door (36" solid pine) so I wouldn't have to worry about my youngsters wandering in when I'm away from the bench. I also built the reloading bench, hutch, and shelving units. The bench is all 2x6" construction with anti-torsion design. The shelves are also 2x6" - perhaps a bit of overkill, but I can load them up heavy. I'm doing my first run of .40 tonight..........30.06 M2 this weekend. http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4388_zpscgnngdg9.jpg http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4389_zpsgxvfehb3.jpg View Quote Awesome setup. Just need a recliner for this man cave and your set for those days your in the dog house with the other half. |
|
|
There's a full size leather couch opposite my bench (not in the pic)
My doghouse isn't too bad - it's only 10 feet away from the dedicated beer fridge and I have satellite/internet capability. I'm good to go and can weather any domestic storm that may blow in........ Originally Posted By Bearcat24:
Awesome setup. Just need a recliner for this man cave and your set for those days your in the dog house with the other half. View Quote View All Quotes View All Quotes Originally Posted By Bearcat24:
Originally Posted By GunsandCoffee71:
Just finished my reloading room - this started as an unfinished basement area with a single light bulb and two truckloads of junk (just bought the house in Aug). The room is 20' x 16' - I did all the framing, electrical, drywall, insulation, and flooring myself. I decided to install an electronic lock on the door (36" solid pine) so I wouldn't have to worry about my youngsters wandering in when I'm away from the bench. I also built the reloading bench, hutch, and shelving units. The bench is all 2x6" construction with anti-torsion design. The shelves are also 2x6" - perhaps a bit of overkill, but I can load them up heavy. I'm doing my first run of .40 tonight..........30.06 M2 this weekend. http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4388_zpscgnngdg9.jpg http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4389_zpsgxvfehb3.jpg Awesome setup. Just need a recliner for this man cave and your set for those days your in the dog house with the other half. |
|
|
Just bought a house and am finally ditching my old workbench/reloading table. It worked, but took up too much room and wasn't efficient use of space. Thank you guys for sharing these pictures and ideas. I've been lurking this thread for a long time waiting for the right time...moving has made it "the right time."
Sorry to stray off topic, I just wanted to thank everyone for taking the time to share their pictures and ideas. |
|
Wading through the field of Joshua trees, I suddenly heard a voice. Was it perhaps the Ayatollah speaking through the breeze? I halted my step, and listened. "If you build it, they will chug...."
|
Global Warming Hoax Skeptic before it was cool
WA, USA
|
Originally Posted By p2tharizo: Just bought a house and am finally ditching my old workbench/reloading table. It worked, but took up too much room and wasn't efficient use of space. Thank you guys for sharing these pictures and ideas. I've been lurking this thread for a long time waiting for the right time...moving has made it "the right time." Sorry to stray off topic, I just wanted to thank everyone for taking the time to share their pictures and ideas. View Quote Glad we could help. |
Selling agent for Algores carbon credit scam.
Shooting and Reloading, one hobby feeds the other. |
I wish - those powder jugs are full of brass.
Only the 1 lb containers have powder in there. Originally Posted By argolfer:
GunsandCoffee - That is an awesome setup. I can't believe nobody has mentioned your stash of powder!! Now that is impressive!! That has to be close to 500lbs of powder. My "stash" suddenly feels very insignificant I guess I'll try to stay on topic here, but it's a pretty sorry pic. I moved out of the garage, where I had a lot more room and a much larger bench, to the upstairs. I don't miss cleaning all the dust and cobwebs off everything when I was in the garage though http://i713.photobucket.com/albums/ww139/familyguy4_photobucket/45795DB9-6B6E-4F6F-A768-191287026D8F-11674-00000B3561253FA1_zpsemusbocx.jpg View Quote |
|
|
Nice room!
Mine has never.....will never be that organized and clean...your reloading journals must be that good too! I was thinking that I could hire you to come organize my RLR! Then I looked at a map.....Illinois is a long way from New Mexico......darn!...........at least you are closer to Grafs than I am.....that's good for you! btw, somebody used those big jugs of powder! You must have a reloading club close by? |
|
|
Originally Posted By GunsandCoffee71:
Just finished my reloading room - this started as an unfinished basement area with a single light bulb and two truckloads of junk (just bought the house in Aug). The room is 20' x 16' - I did all the framing, electrical, drywall, insulation, and flooring myself. I decided to install an electronic lock on the door (36" solid pine) so I wouldn't have to worry about my youngsters wandering in when I'm away from the bench. I also built the reloading bench, hutch, and shelving units. The bench is all 2x6" construction with anti-torsion design. The shelves are also 2x6" - perhaps a bit of overkill, but I can load them up heavy. I'm doing my first run of .40 tonight..........30.06 M2 this weekend. http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4388_zpscgnngdg9.jpg http://i20.photobucket.com/albums/b206/Bluesking89/IMG_4389_zpsgxvfehb3.jpg View Quote This looks fantastic. I am planning a room that should be around 14x18, give or take. Your room is a smidge bigger, so I am looking at your pics and getting ideas. If you have any more pictures of the room, please post them! |
|
|
|
|
Some nice benches in this thread. I will add to my pictures once I put the doors on my cabinets and finish organizing.
You guys that reload in the house are lucky. My wife has laid down the law. No workshop in the house. I can't complain too much. I have the garage and the basement and she goes by my rules in my domain. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.