One on Tacswap for 3500. Which is high since someone sold one last year for 2400

Not seeing it. Link?

I have seen 2 QDSS NT4 cans go on GB for $3500-4500.

Never mind. Found it. Seen it before. Believe is has 1k+ rounds through it. I’m looking for one that’s in newer condition. Thanks though.

This seems about market

Hi guys/gals - time to thin the herd, been sitting in a safe since the 90's.  Any input on value?
Low round count, less than 100, probably less than 50.   Serial # is 20XXX.   No box, manual, etc.  
I've looked around a bit, there is one currently for sale on GB with an asking price of 8750 .. no way I can believe that's current market? Thanks!

I have a new in box Knights Armament SR15 Mod 1 with the QD cup lower.  I have the everything as it came from the factory and has never been fired.  Still has the original wire tag on it.
Any idea on what I should ask for it?

A used Mod 1 upper sold for $2,750 on GB (if real). Add another $2k for the lower and given its brand new, maybe around $5k for the whole kit to the right buyer. But the market sucks right now. Your best bet might be to wait until closer to the election to maximize value (as crappy as that sounds).

Thanks

You are correct not current market IMHO but its not like these are $4K either.  Best bet is to join NE Shooters and list at a price lower than that, say like $6,5000 or BRO and see if you get any bites as the preban factor may give you traction there.  Good Luck.

Thank you so much for your input!  

Value on a new 3/4-24 Long Tine MAMS? Looking to swap for a short tine, is there any difference in value?

https://imgur.com/a/drGXilY

LT worth more (K1 cloners). My guess is $700ish for the LT?

Thanks. Any idea how much more? Probably best just selling it and grabbing one of the new brakes

The LT is maybe $200-250 more than a ST? Guessing on that one...

Surplus painted Vero Beach Mk11 RAS?

While it's been almost 2 years, I gave $350 for mine in the same condition. With how prices have gone up since, I'll bet it would move easily at ~$500 or even more.

Picked this up in trade awhile back. Not sure if this is a KAC or LMT handle or something else? Latch profile looks KAC, paddle looks like LMT.

Mystery Charging Handle

Hey what’s the current value of a stripped kac Non-ambi lower ? I have some that are blems  and some are the non blemish lowers ? It funny thought because I can’t tell the difference between them aesthetically or gauging them .Sorry if this have been recently asked

There's one on GB starting at $800 that nobody has bid on, so I'd guess $600-700 unless it starts getting action.

Any idea what an older (Mod 1) 11.5” SR-30 upper with URX 3.1 handguard would go for?  Not sure if it has a Krieger or Noveske barrel.

The rail alone is probably around $1k depending on condition.

Any idea of the value on a FF RAS medium?  Really good shape but has been used a little so couple small marks on the rails

762 URX III P/N:30001




Attached File
Attached File
Attached File

Was going through some random parts in my gun room and found these KAC items. The first items are a pair of KAC buffers that seem to be pretty unique/interesting. I tried to find this part number, 24549, online, but nothing pops up. The markings on the 24549 buffers are slightly different from each other, so they were probably made a different times. I have no idea if they're rare, and I don't even remember where/when I acquired these buffers. I sold my SR25 Battle Rifle a few years ago and the only large frame KAC rifle currently in my collection is an M110K1, so I don't really have a use for these buffers. Does anyone know anything about these buffers? Are they rare or interesting? Estimated value? Here's the two 24549 buffers next to a current production 21057 buffer:





Here's a KAC micro front sight that is marked "USMC." These USMC marked micro front sights were included with the US military M110K1 uppers. KAC doesn't sell these USMC micro front sights to civilians, and I've only seen 2 or 3 in private collections (all of them are on US military surplus M110K1 uppers that were acquired directly from KAC). This sight came off of my original USMC used M110K1 upper  (acquired directly from KAC by a KAC dealer friend, it's not a DRMO upper), and I've never seen one of these USMC marked KAC micro front sights loose and for sale. I'm curious as to what this interesting and extremely rare KAC sight is worth, so I'd appreciate any value estimates.




Here's a KAC PEQ-2 mount, part number 95326. This mount has the metal rail insert with plastic screw spacer, so this mount can be used on KAC handguards with and without threaded mounting holes. KAC sold these PEQ-2 mounts with and without the metal insert/plastic spacer included (these 2 pieces were used on the handguards that don't have threaded mounting holes), and this mount has the insert/spacer. This was the best way to purchase the KAC PEQ-2 mount (the other package didn't have the insert/spacer included) because the insert and spacer could just be removed if your handguard has threaded mounting holes. So, this is the better version with these extra parts included and can be used on more types of KAC handguards. I haven't been one of these available in a lot time, so I was wondering what it's currently worth. This one has been briefly mounted on a KAC handguard and is in excellent condition.







Thank you in advance for the help!

Any idea what a Magpul Dynamics SR-15 kit is worth?  Unfired aside from the factory, but had some accessories mocked up is all.  Has the bag, DVDs, rifle, sling etc.

$7000-$9000, maybe a little more because it is unfired.

There's one on GB right now missing the 3T and is sitting at $4000 with 5 days to go.

I have a mint condition SR15 Mod 1, what do you think is the estimated value?

Same for a SR25 CC with less than 120 rounds, estimated value

Both as complete rifles

I know what I see on the EE, GB and etc, but in realistic terms, the value I could sell for.

Looking for value of a QDC 7.62, purchased new 2015 with about 150 rds though it  
                                                                                                                                             




upload picture

The last one I know of that sold in a private transaction (on a Form 3) went for $3,250.

Are there an SR-25 rifles for sale….anywhere?

How would a KAC Accuracy international NV rail for legacy AI rifles be worth?

How much would be a fair asking price for an unused 13.5" urx3.1 with installation wrench?

The last one of those I saw was in the $900 range. It's an unusual rail for a niche product.

$400-500?

Thanks

I was going through a bunch of my older stuff and came across a NIB Knights Armament M5 I had stashed away. What would be a fair price to ask?

Thank you

MSRP is around $350. You might could get a little bit more than that?

Cool. Thank you

Have a low round count unpinned 14.5 mod 2 Upper with a Sandcutter that has a Young MFG chrome gas key and an OG chrome bolt.

Any idea for the combo?

Looking at a KAC SR15 MOD2 16" complete upper sitting on an Umbrella Corp lower with full KAC guts except a FCD bolt catch and DD stock ? He's got it priced pretty high...said the Umbrella Corp lower is harder to find than KAC lower.. what's would be a reasonable offer. He has an original non ambi KAC lower as well that ide like to get also..but thats later

https://ibb.co/KrDFjj6
https://ibb.co/Btz6dB8
https://ibb.co/7RqGFZC
https://ibb.co/VLR07g1

I have a 10.75” keymod urx4 that’s seen better days so I chopped it to 7.5” got a 300blk build.  Anyway, I found a sr-30 upper so the home built project got scrapped.  Any idea what a salty keymod urx4 that’s been chopped to 7.5” would be a fair price to list it at?

The last time I sold a chopped rail, I got $30 or 40 for it.

I wouldn't expect much difference in case yours included the wrench and someone was looking for both pieces.

KM or MLOK?

MLOK.

Appreciate it man

There's one on GB right now.

What would a Vero marked NT4/M4QD go for in today’s market?
Attached File

Attached File

I could easily entertain north of $5k, probably more on GB.

removed the NT4 MAMS from my 14.5 MOD2 (was pin/weld)  haven't seen any on the EE in a while to compare. what are they going for now so i can post it on the EE  and not feel like a jerk for gouging?

thanks,

T