User Panel
User Panel
User Panel
|
Posted: 10/27/2014 1:42:57 AM EDT
[Last Edit: Alaska511]
We aren't allowed in the RECCE / SPR threads, so post the 14.5s and smaller here!
I borrowed the name from another member 
RIFLES/SBRs ONLY, PLEASE. No Pistols or "PDWs" with braces, etc. You pistol peeps have an entire subforum for that stuff. 14.5" and shorter, free floated, variable mag optic - LPVOs are great! Please no magnifiers, or ACOGs.. 
Noveske Crusader upper WMD NiB BCG Vortex Razor HDII 1-6x Seekins forged lower Seekins billet lower parts Geiselle SSAe VLTOR IMod and RE Sprinco Blue and H2 BCM Mod1 grip |
|
|
|
NV, USA
|
Posted: 10/11/2023 11:08:47 AM EDT
[#1]
I'm unsure on this one. I think this may be a dumb configuration, but I had the scope sitting around.
It is a 10.3 5.56 with a Trijicon Accupoint 1-6. Given the limitations of the 10.3, I don't think the scope is giving me much over a red dot/magnifier. But, the scope is limited as the reticle has no hold offs for drop. In my mind the scope has about the same utility as a red dot with a 6x magnifier. If I could do it all over I would go with an 11.5-12.5 and a different scope. I also have a MK18 with an eotech/mag as my primary CQB type carbine.  |
|
|
MI, USA
|
Posted: 10/13/2023 8:18:04 PM EDT
[#2]
Just mocked up with no barrel, but you can see where this is going. This is where the can would be with a ~11.5" barrel. I have a 13.7" Noveske on the way, but still considering a change.
|
|
|
|
Posted: 10/14/2023 1:36:58 PM EDT
[#3]
Quote HistoryOriginally Posted By jsxtreme: Just mocked up with no barrel, but you can see where this is going. This is where the can would be with a ~11.5" barrel. I have a 13.7" Noveske on the way, but still considering a change. https://i.imgur.com/nguSZ7p.jpg If it helps you at all, this is a 13.9.  Attached File |
|
|
|
NC, USA
|
Posted: 10/14/2023 5:07:53 PM EDT
[#4]
Quote HistoryOriginally Posted By 2apatriot: If it helps you at all, this is a 13.9. https://www.ar15.com/media/mediaFiles/361805/IMG_2613_jpeg-2991317.JPG Dude, that thing looks awesome. |
|
|
MI, USA
|
Posted: 10/14/2023 5:08:53 PM EDT
[#5]
It does, thank you!
|
|
|
ME, USA
|
Posted: 10/14/2023 6:17:44 PM EDT
[#6]
Go with 12.5 you can still shoot it without can
|
|
|
NC, USA
|
Posted: 10/14/2023 8:29:03 PM EDT
[#7]
Quote HistoryOriginally Posted By jsxtreme: Just mocked up with no barrel, but you can see where this is going. This is where the can would be with a ~11.5" barrel. I have a 13.7" Noveske on the way, but still considering a change. https://i.imgur.com/nguSZ7p.jpg Is that an SDN6 tucking in there? |
|
|
MI, USA
|
Posted: 10/15/2023 10:22:01 AM EDT
[#8]
Originally Posted By Eyekahn: Is that an SDN6 tucking in there? Sadly, no. A deadair sandman S Mil. Its a TAC FDE upper - anchor forge, 12.5" PRI hand guard, 13.7" Noveske barrel, NOX9 and the can. Eventually I'll probably pin and weld it with the NOX and grab a different lower for it. It's kind of a vibe with no muzzle device though.  
|
|
|
|
Posted: 10/15/2023 10:43:32 AM EDT
[#9]
|
|
|
|
|
Posted: 10/15/2023 11:01:06 AM EDT
[#10]
ost
|
|
|
|
USA
|
Posted: 10/19/2023 1:29:34 AM EDT
[#11]
Damn, been away awhile, some badass rifles posted lately!
|
|
|
|
Posted: 10/20/2023 3:10:08 PM EDT
[Last Edit: WUPHF]
[#12]
Newest build. Noveske G4 upper/handguard on KAC TDP lower w/ a 14.5” Proof CF 6mm ARC barrel + ATACR 4-16x42.
 Attached File |
|
|
|
|
Posted: 10/20/2023 6:03:44 PM EDT
[#13]
I lucked out and a guy at the range had a Lab Radar. I told him I’d give him $5 if he let me shoot a couple different rounds. You had to get the suppressor pretty close to pick it up. The Indian M193 I had was faster than I thought out of the 13.9” Criterion Core.
 
|
|
|
|
NC, USA
|
Posted: 10/20/2023 7:54:15 PM EDT
[#14]
Quote HistoryOriginally Posted By WUPHF: Newest build. Noveske G4 upper/handguard on KAC TDP lower w/ a 14.5” Proof CF 6mm ARC barrel. https://www.ar15.com/media/mediaFiles/294984/E584E97F-D9FF-46EA-A285-3D2E8C260E0B_jpe-2998238.JPG That looks good, very good! |
|
|
NC, USA
|
Posted: 10/20/2023 8:29:00 PM EDT
[#15]
Quote HistoryOriginally Posted By Maack: I lucked out and a guy at the range had a Lab Radar. I told him I’d give him $5 if he let me shoot a couple different rounds. You had to get the suppressor pretty close to pick it up. The Indian M193 I had was faster than I thought out of the 13.9” Criterion Core. https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgGUey3cEdpIErvemAj1bjXIjdPwCJuLf97jEU2VmI5ebNE2LfIDdnusqpEGbf3efHjGiz9S8fz6EHwxkznsON_qYfpFn_6fKPGl0qbOwvHV2OYinb89WS92yoD0srd_bk9Z7ozGV9jvCrkr8lb0ewOYDgEPtiISYATkLNaQhBNiYEzzcGg7GXoEhjK/s2175/IMG_2559.jpeg https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgEO8VI6UQ0RwBGVm3MvfvPxGKQ7OHoYcJ4oDXqWUlRjON2SvxjcQ7FngsRC7e77OETykJATHAx2iI0DOR3VpPgIqcS-r9KU-ZIbvUnwTVnU4EKro48A5JZ1lwvy5w472nXBnmqkDbgQ0lX8jZmdluAMrTb7MDNLfQYT3O317naOpQDOKhkOoOtGnjz/s4032/IMG_2556.jpeg That's great SD for m193. What's the ammo? |
|
|
|
Posted: 10/20/2023 8:55:38 PM EDT
[#16]
Quote HistoryOriginally Posted By Eyekahn: That's great SD for m193. What's the ammo? It’s Indian Ordnance. I bought 2 800 rd cans back when it was pretty cheap. Got it through KR Armory. https://www.thefirearmblog.com/blog/2021/11/19/new-ds-arms-5-56-m193-spec-ammunition/ |
|
|
|
MI, USA
|
Posted: 10/21/2023 10:14:57 AM EDT
[Last Edit: jsxtreme]
[#17]
|
|
|
|
Posted: 10/22/2023 1:27:36 PM EDT
[#18]
 14.5 Larue rifle ( a complete upper and a complete lower that I found seperately and clicked together ) - Sig 1-6 Tango-MSR - was unsure of this vs the 1-10x I have. |
|
|
|
NC, USA
|
Posted: 10/23/2023 6:46:00 PM EDT
[Last Edit: Eyekahn]
[#19]
Finally got the 13.9 I build for my dad out to the range.
What buffer is everyone running on their 13.9 middy? This was short stroking unsuppressed with 223 55gr and a pretty stout 60gr HP hand load. Suppressed it ran perfect and ejected at 3-4 o clock. Was running a STT2 buffer. Just swapped in a carbine to see if that helps. 
|
|
|
|
Posted: 10/23/2023 8:55:31 PM EDT
[#20]
Quote HistoryOriginally Posted By Eyekahn: Finally got the 13.9 I build for my dad out to the range. What buffer is everyone running on their 13.9 middy? This was short stroking unsuppressed with 223 55gr and a pretty stout 60gr HP hand load. Suppressed it ran perfect and ejected at 3-4 o clock. Was running a STT2 buffer. Just swapped in a carbine to see if that helps. https://i.imgur.com/oVqirNU.jpg That barrel must have a small port or something isn't aligned right. Mine would eject at 1 o'clock suppressed with an h3 or a5h3 and tons of extra gas to face. Ended up making a gas block insert to get the gas right with an a5h2. |
|
|
|
|
Posted: 10/23/2023 9:54:20 PM EDT
[#21]
Quote HistoryOriginally Posted By UndrGrndPrdcts: That barrel must have a small port or something isn't aligned right. Mine would eject at 1 o'clock suppressed with an h3 or a5h3 and tons of extra gas to face. Ended up making a gas block insert to get the gas right with an a5h2. Yeah I’m running an H3 and Springco blue just to get 2 o’clock with an RC2. |
|
|
|
NC, USA
|
Posted: 10/24/2023 6:26:52 AM EDT
[#22]
Quote HistoryOriginally Posted By Maack: Yeah I’m running an H3 and Springco blue just to get 2 o’clock with an RC2. It's a BA barrel. Checked the block seemed to be right on the money. Reviewed the chrono and the 55gr load was only doing 2700fps at sea level at 65 degrees. So the stuff was really slow. The factory Armscor choked up too and was only about 100fps faster. With my 762RC it ran perfect |
|
|
|
Posted: 10/24/2023 9:26:36 AM EDT
[#23]
Quote HistoryOriginally Posted By Eyekahn: Finally got the 13.9 I build for my dad out to the range. What buffer is everyone running on their 13.9 middy? This was short stroking unsuppressed with 223 55gr and a pretty stout 60gr HP hand load. Suppressed it ran perfect and ejected at 3-4 o clock. Was running a STT2 buffer. Just swapped in a carbine to see if that helps. https://i.imgur.com/oVqirNU.jpg the Griffin SOB with springco blue has worked great on the 13.7" rosco midlenght upper, KAC factory HH buffer and springco blue on my 13.7" chopped mod2 upper, and springco green and A5H2 on my 13.7" SOLGW barreled upper... i could change the springco blues to the "hot white" and run steel cased unsupressed in each upper, currently running wolf gold or PMC bronze everything is 100% with or without the can. T |
|
|
|
|
Posted: 10/25/2023 2:20:46 AM EDT
[#24]
 I change some things up. I straight up loving the 4-14x44 on it. Currently waiting on the RMR plate to run a canted red dot |
|
|
|
CA, USA
|
Posted: 10/25/2023 2:46:03 PM EDT
[#25]
Quote HistoryOriginally Posted By stormhammer: https://www.ar15.com/media/mediaFiles/570439/384553141_1311507879510509_3759688667994-3003433.jpg I change some things up. I straight up loving the 4-14x44 on it. Currently waiting on the RMR plate to run a canted red dot That receiver/handguard interface on the LaRue upper looks pretty awesome. Nice rig! |
|
|
|
Posted: 10/25/2023 3:48:44 PM EDT
[#26]
those of you with mini 300s - what kind of range are you able to squeeze out of subs? I’m debating offloading an EoTech and putting the funds towards a Razor, but it feels odd to put a 1-6 on a 8” barrel.
TIA. |
|
|
|
NC, USA
|
Posted: 10/25/2023 6:49:47 PM EDT
[#27]
Quote HistoryOriginally Posted By HimIOwe: those of you with mini 300s - what kind of range are you able to squeeze out of subs? I’m debating offloading an EoTech and putting the funds towards a Razor, but it feels odd to put a 1-6 on a 8” barrel. TIA. 300m is as far as I've shot my old 300 MR. Used a Steiner 1-4 and dialed the elevation. |
|
|
|
Posted: 10/25/2023 8:54:02 PM EDT
[#28]
Still need a mount for the Steiner and OKW, but it’s close. I should’ve done this as soon as I got my aem5.
 Attached File |
|
|
|
|
Posted: 10/25/2023 10:40:11 PM EDT
[#29]
Quote HistoryOriginally Posted By Three0h8: Still need a mount for the Steiner and OKW, but it's close. I should've done this as soon as I got my aem5. https://www.ar15.com/media/mediaFiles/468563/IMG_2808_jpeg-3004337.JPG Thanks, lj |
|
|
|
|
Posted: 10/25/2023 10:59:58 PM EDT
[Last Edit: Three0h8]
[#30]
Quote HistoryOriginally Posted By liljim11: Specs on rifle please? Barrel? Barrel length? Thanks, lj Aero receiver, 12.5” ballistic advantage 5.56 barrel, Pri gen 3 rifle length handguard, AEM5 |
|
|
|
|
Posted: 10/25/2023 11:28:03 PM EDT
[#31]
It actually makes the barrel 100% true free floating as the handguard does not touch the barrel nut in any way whatsoever.
|
|
|
|
|
Posted: 10/25/2023 11:29:12 PM EDT
[#32]
Quote HistoryOriginally Posted By Three0h8: Aero receiver, 12.5" ballistic advantage 5.56 barrel, Pri gen 3 rifle length handguard, AEM5 Quote HistoryOriginally Posted By Three0h8: Originally Posted By liljim11: Specs on rifle please? Barrel? Barrel length? Thanks, lj Aero receiver, 12.5" ballistic advantage 5.56 barrel, Pri gen 3 rifle length handguard, AEM5 lj |
|
|
|
|
Posted: 10/25/2023 11:43:33 PM EDT
[#33]
Quote HistoryOriginally Posted By drewthebrave: That receiver/handguard interface on the LaRue upper looks pretty awesome. Nice rig! It actually doesn't touch the barrel at all, making it 100% true free floating |
|
|
|
NJ, USA
|
Posted: 10/30/2023 11:19:48 PM EDT
[#34]
Anyone know what barrel length would allow a KAC FF RAS Medium to fit flush with an AEM5 similar to the 15.1" seal recce? I've been having trouble finding specifics on this topic, any help is appreciated!
|
|
|
|
Posted: 10/30/2023 11:23:45 PM EDT
[#35]
Quote HistoryOriginally Posted By GuidedPrism: Anyone know what barrel length would allow a KAC FF RAS Medium to fit flush with an AEM5 similar to the 15.1" seal recce? I've been having trouble finding specifics on this topic, any help is appreciated! 13.0x D.Wilson or Adco can get it. ADCO can custom make a collar if your barrel is thinner or you can use a Allegheny gas block and a midlength gas system |
|
|
|
|
Posted: 11/1/2023 6:35:58 AM EDT
[Last Edit: WUPHF]
[#36]
Deleted.
|
|
|
|
|
Posted: 11/1/2023 6:43:06 AM EDT
[#37]
Quote HistoryOriginally Posted By DackJaniels: 13.0x D.Wilson or Adco can get it. ADCO can custom make a collar if your barrel is thinner or you can use a Allegheny gas block and a midlength gas system Yep, right in that ball park. This uses an Allegheny gas block. 
|
|
|
|
OH, USA
|
Posted: 11/2/2023 4:28:08 PM EDT
[Last Edit: whiplash10]
[#38]
Over here photobombing my wife's fancy new mudroom with my new stick. Psyched to check out accuracy and how it shoots in general at the range tmrw.
12.5 Rosco Sage Barrel Kratos Gas Block FCD Rail + QD swivel SF Mini Can + Scout Ultra Badger 1.7 Razor 1-10 MRAD Radian Enhanced BCG FCD Charging Handle Aero M4E1 Receivers Radian Talon Geissele SD-C H3 Buffer (forward pic section is for QD bipod, rear pic section is for RRS Arca head on my tripod) 
|
|
|
USA
|
Posted: 11/3/2023 9:57:30 AM EDT
[#39]
|
|
|
|
Posted: 11/3/2023 11:06:51 AM EDT
[#40]
|
|
|
|
|
Posted: 11/3/2023 11:15:46 AM EDT
[#41]
|
|
|
|
|
Posted: 11/3/2023 8:56:50 PM EDT
[#42]
Quote HistoryOriginally Posted By WUPHF: 14.5” guns, 6 ARC and 5.56 https://www.ar15.com/media/mediaFiles/294984/7101072F-D48A-4226-9F24-E17C21B5E4E3_jpe-3014276.JPG What optic on the bottom rifle |
|
|
|
|
Posted: 11/3/2023 8:59:45 PM EDT
[#43]
Quote HistoryOriginally Posted By bzugger: What optic on the bottom rifle Looks like a Trijicon from the eye piece |
|
|
|
|
Posted: 11/3/2023 9:15:16 PM EDT
[#44]
Quote HistoryOriginally Posted By 5L33P3R: Looks like a Trijicon from the eye piece Quote HistoryOriginally Posted By 5L33P3R: Originally Posted By bzugger: What optic on the bottom rifle Looks like a Trijicon from the eye piece Correct. Credo 2-10x36 |
|
|
|
|
Posted: 11/3/2023 9:18:02 PM EDT
[#45]
Quote HistoryOriginally Posted By WUPHF: Correct. Credo 2-10x36 
|
|
|
|
TX, USA
|
Posted: 11/4/2023 11:24:38 PM EDT
[#46]
Should I go from a geissele super 42 and closed tine warcomp on a noveske 12.5 to a bcm/VLTOR a5 and surefire socom brake?
|
|
|
|
Posted: 11/7/2023 3:46:55 PM EDT
[#47]
Played musical optics and did a quick zero at 25 until I can get to the outdoor range.
 Attached File |
|
|
|
|
Posted: 11/8/2023 9:58:18 PM EDT
[Last Edit: BBOHACH]
[#48]
|
|
|
|
|
Posted: 11/21/2023 3:23:21 PM EDT
[#49]
|
|
|
|
|
Posted: 11/21/2023 7:04:33 PM EDT
[#50]
Quote HistoryOriginally Posted By 5L33P3R: 13.7” MOD2 https://www.ar15.com/media/mediaFiles/478727/IMG_8583_jpeg-3035069.JPG https://www.ar15.com/media/mediaFiles/478727/IMG_8585_jpeg-3035070.JPG Got enough buttpad on the old girl? 
|
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File