User Panel
Posted: 12/20/2010 8:59:25 AM EDT
[Last Edit: RTUtah]
Originally Posted By PSYWAR1-0: The Recce platform was something that sprung up within the NSW and 5th SFG communities that first became the Special Purpose Receiver built by Crane, which was supposed to be installed on any M4 lower. After a time when the perfect storm of the users wanting a match-grade trigger and the bolt-bounce issue was identified, the Special Purpose Receiver morphed into a complete rifle that was type-classified as the Mk12. Mk12: A BRIEF HISTORY (as authored by "LGT" & "FL") Mk12 Special Purpose Rifle (SPR) Scoped versions of the M16 rifle existed as far back as the 1960s. Like nearly all historic military rifles, the M16 went through decades of efforts to improve its accuracy, both in the military and civilian marksmanship communities. The need for the SPR dates back to the late 1980s and early 1990s when the 7.62mm M21 sniper rifle, a semi-automatic weapon of Vietnam vintage, was replaced by the M24 sniper rifle, a bolt action weapon. The M24 was originally specified to be a .300 Winchester Magnum, but the Army decided to field it in 7.62 NATO for a variety of economic reasons. This left the M24 in the unenviable position of being the worst of both worlds in the eyes of snipers at the time, since it lost the fast-shooing, semiautomatic capability of the M21, but did not gain the range advantage of the .300WM. This compromise left a vacant requirement for a fast-shooting semi-automatic sniper rifle. This need was most apparent in the US Army Special Forces (SF) community, since the other commands within the Special Operations Forces structure filled that need with Knights Armament Corporation's SR-25 sniper rifle. Army SF, being prohibited by its leadership from procuring the SR-25, sought the next best alternative, namely a Special Purpose Receiver (SPR) kit to convert the Army SF M4 carbines into highly accurate rifles. In late 1998, at the request of SFC Steve Holland of 5th Special Forces Group, and the approval of the SOPMOD joint IPT, the Special Operations Peculiar Modifications (SOPMOD) Program Manager, Troy Smith, authorized the purchase of 5 sets of commercial items as an SPR experiment. The original requirement was for USASOC, mainly the SF Groups, as WARCOM had the MK11, 7.62mm system. Once the SPR requirement was developed and demonstrated through experimentation, most of the other commands in USSOCOM added themselves to the Basis of Issue Plan (BOIP). The USSOCOM requirement for the SPR, with improved ammunition, was approved in July 1999, as part of the SOPMOD Kit, Operational Requirements Document, Version 5 (ORD 5). Further initial development included several variants of the SPR and new ammunition that were compatible with the M4 carbine's lower receiver. It was found that standard issue M855 5.56mm ammunition was not consistent enough to meet the requirement. In 2000, based on an upgrade requirement to provide a match-grade trigger to the design, Mr. Paul Miller, the SPR project manager, discovered an opportunity to pick through over 15,000 M16A1s that had been sent to Crane for destruction. Realizing that these M16A1 rifles, some of which were virtually new, could be used as "free lumber" to build full SPR weapons, Paul selected several thousand rifles to be set aside for the new SPR project. The SPR underwent a minor but significant name change, with the R having originally stood for "Receiver" now standing for "Rifle" The new weapon system was worthless without a matching round of ammunition to obtain the performance required. The PEO-SP USSOCOM authorized the new round that became Mk262 as part of the Mk12 system in August 2000. Paul Miller and his SPR team refined the 77-grain prototype ammunition and built approximately 124 SPR Rifles in the summer of 2001. These were finished just in time to ship out to Army SF in late October 2001, to be used in the first invasion of Afghanistan. The SPR rifles were extremely well-received, and the SOF combat units ordered hundreds more. In May 2002, USSOCOM removed the Mk12 and other complete weapons projects from the SOPMOD Program and placed them under the newly-formed USSOCOM Weapons Program. The fielded weapons included two versions (Mk12 Special Purpose Rifle Mod0 and Mod1). Fielding has since been structured for Mk12 Mod1 Special Purpose Rifle only. This rifle is used by Joint USSOCOM Commands and the USMC in combination with M262 (AA53, 77 grain) ammunition. Formal fielding of the full-rate production version of the Mk12 rifle and ammunition occurred in May 2003 and was completed in FY '04. In 2012, as the decade of war on terrorism was winding down and the SCAR weapon system began replacing the requirement for the Mk12, USSOCOM and Naval Special Warfare divested themselves of the Mk12 weapons system, and the Mk12 is now being looked at to fill a Designated Marksman Role within Brown Water Navy commands. View Quote * * * * * * * * * * The following parts lists and substitution parts was compiled by lancecriminal86 over the course of a LOT of research. Read up and pay attention! Below are the 100% .mil-spec parts lists to build a true SPR or Mk12 clone. Some of these parts are no longer manufactured and will require much effort and money to locate through forums and online brokers. Keep in mind the rifles were built off donor M16A1s, hence the prevalent A1 parts in the lower receivers and the BCGs. They were also first configured using parts available from 1998-2004, and most are inferior in some ways to newer designs. If this bothers you too much, STOP NOW. The rifles were issued as a kit in a Pelican 1700 case with cutouts. The kits included the rifle with suppressor, optic, bipod, an Eagle TAS-1 UMSS sling (unobtanium and also absolute crap), with a Dewey 1-piece cleaning rod plus Otis cleaning kit, and a cutout for magazines. An operator's manual was also included, however these have not been officially released for public consumption. However, the manuals are out there, and some companies building Mk12 uppers include one. Whether these are official .mil operator's manuals or specially made is currently unclear as the manual itself still contains language that it is not for distribution. - Alternate .mil-spec parts due to NFA, NLA parts, or changes in name/markings for current production in [brackets] - Extra notes about parts or availability are in (parenthesis) LOWER Lower receivers were standard across the SPR/Mk12 variants and the only variations would be between grips, stocks, and buffers. Most were marked either Colt or GM Hydramatic. All other parts were the same in regards to the lower parts. One caveat is the trigger, as the program originally selected the Knight's Armament 2-stage Full Auto Match trigger. Later on, some issues regarding negligent discharges occurred, and Geissele SSF triggers ultimately found their way into the Mk12 family. Whether 100% of all Mk12s eventually received the Geissele trigger isn't clear, so either is acceptable.
The upper receivers, which ultimately differentiate the four variants of the Mk12, have the most variation between each other. Early SPR/Mod0
ModH, Mod "Holland"
Naturally, once these rifles were issued to units, operators and even Marines used various non-issued parts. Here is a short summary of what has been seen: Early SPR/Mod0: Both Leupold 3.5-10x40mm and 3-9x36mm scopes have been used. Many have had carbine stocks like the old CAR-style, enhanced M4, SOPMOD Gen I, or even the Tactical DuoStock swapped on. Mod1: One 3rd SFG-issued rifle pictured with SSgt Robert J. Miller (MoH recipient) used an A.R.M.S #36 S-EX 5.56mm rail, and a Leupold M3X 10x fixed-power scope, possibly pulled from an M-24 or SR-25 rifle. Another has been seen with a Magpul PRS, LaRue mount, and a Premier Reticles 3-15x used by an AMU shooter, and a similar rifle was pictured on a FOB in a very posed-looking photo. Further, a USMC-issued Mod1 was seen using #22 Medium rings instead of High rings, and a LaRue mount has been spotted as well. Grips have varied from the usual A1, A2, and ERGO, and at least one Magpul MIAD has been used. As with the Mod0s, carbine stocks like the SOPMOD and M4 have been used on Mod1s. ModH: The Mod "Holland" was already a small-batch configuration, but even as soon as they were issued to 5th SFG units, some Ace SOCOM stocks were replaced with Magpul ACS and CTR stocks. Optics are basically anything existing in the unit's inventory, from S&B ShortDots still in the system, the 3-9x and 3.5-10x Leupold scopes from earlier Mod0s, and there's even a photo of an ELCAN on a Mod1 floating around. No non-magnified optics like EOTechs or regular Aimpoint M2/M4s, but Micros have been seen on offset mounts. Backup iron sights, as a whole, were almost entirely left unmounted. Grips were again the same usual selection. Parts Alternatives for Clone Building Many parts are rare, expensive, and/or both. Despite this, there are some alternatives to a 100% pure clone that will still provide the same visual look and performance. While not a museum-grade clone, most would be hard-pressed to discern the difference. Just know there are those of us out there that will haze and peer-pressure you into further moving your build towards a true clone. Barrel: Popular options are the White Oak Armament SPR barrel (rifle gas), BCM's SPR barrel, Rainier's Match and Ultramatch offerings (ensure it's the SPR contour with 12th Model profile), Ballistic Advantage's SPR barrel. Compass Lake Engineering can also spin a Mk12 profiled barrel with a Criterion chrome-lined blank, or even a Krieger, which was one of the original contenders for the program. The DPMS Mk12 barrels are NOT properly profiled for a clone. Optics & Rings: In the case of the Leupold 3-9x or 3.5-10x, it's generally okay to go for a non-illuminated version of either, sometimes with M1 or other turrets and reticles. As far as the NightForce scope, the 2.5-10x24mm is not generally released to the public anymore (with one recent exception through Sniper's Hide), so many use the 32mm or even 42mm versions with the #22 High rings. As for the rings, any of the recent produced A.R.M.S. #22s with the lever-stop humps are functionally the same, the desire for non-lever-stops is purely aesthetic when going for the most authentic look. As LaRue LT-104s have been seen in use, it is justifiable to use one depending on whether you have a specific rifle you want to copy, or even just if you absolutely cannot acquire #22 High rings. A.R.M.S. #38 SWAN Sleeve: The #38 family of sleeves are no longer available. Finding them secondhand usually cost $250-$300 easy, more for rarer early variants. Fortunately, PRi's copies of the sleeves look and function almost identically, with minor visual differences. PRi and other builders supply these currently for complete Mod0 builds. FSB: While the set-screw version of PRi's FSB is spec, most use the cross-bolt, clamp-style version. They are extremely robust, and when aligned and torqued, have been shown to hold strong enough that you'll probably shear your barrel extension pin or upper before it budges. This is mainly how Mod0 uppers are supplied by most vendors, including PRi themselves. Suppressor, Brake/Collar: Diverging from the OPS Inc. or AEM brake and collar will get you MAJOR flak. Trust me, I've been running an AAC SPR/M4 for years now and it took a LONG time to not get clubbed every time I posted it. The Allen Engineering AEM5 is basically the current production of the OPS Inc. 12th Model, as they were originally made by Ron Allen and his team in the first place. Only minor differences separate original OPS Inc. cans from AE cans, and these are only obvious to trained eyes. As far as the rest, you can swap Colt parts out for any other .mil-spec parts, like BCM, DD, CMT, etc. Any billet uppers/lowers, funky BCG coatings, extended bolt releases, etc. are extremely frowned upon. Remember, once you start going down the path of building a "better" rifle rather than what was spec, you're quickly beyond clone territory and would have been better off building a custom 16" or 20" rifle. Cloning is generally viewed as all-in or not at all. * * * * * * * * * * Complete Mk12 Mod0 / Mod1 Uppers Bravo Company Manufacturing High Caliber Sales Precision Reflex Inc. Specific Mk12 Tech Augee's side-by-side comparison of the original ARMS SWAN Sleeve and PRI reproduction PEQ Sleeves: bottom of p136 KOBK's side-by-side comparison of PRI Gen I, II, and III handguards, and Gen I and Gen II FSBs, and SWANs: middle of p137 Augee's Mod1 gas block tech: top half of p357 Glass1's Early Mod0 photo breakdown: middle of p449 tamboi's Leupold Vari-X, TS30, and TS30A2 scope history/lineage, and part numbers, p.792 * * * * * * * * * * As of 16 May 2024, Ron Allen is still making custom parts for his suppressors: View Quote * * * * * * * * * * Attached File |
|
MACV-SOG nut.
|
|
Originally Posted By CMCctx: Not to split hairs, but Ron has been the constant factor. From Ops to AE, and even the brains/support behind Trajectory taking these on. Sure the name on the cans is changing, but not really the cans themselves. At least not enough to matter. View Quote Ops to AEM is just 2 holes omitted on some stacks, in essence. |
|
|
“Correct me if I'm wrong Sandy, but if I kill all the golfers they'll lock me up and throw away the key.”
|
Originally Posted By WittyTiger: Recently acquired two PRI A1 lowers, is anyone running these on their Mod H? Don’t think they made many factory A1 lowers but can’t find much info on them. https://i.imgur.com/u1k7Kn0.jpeg https://i.imgur.com/dr20cyG.jpeg View Quote Not sure how long they were in production, but they seemed readily available for a while. I ended up going with a their 80% lower because I didn't like the trademarks. |
|
|
Originally Posted By HotLead: Doubletapped on an old post. Anyone have pics of a genuine MK262 ammo can? View Quote Hope this helps - Couple different ones that I came across- I believe one from ‘04 and then one from ‘21? (guessing from nomenclature of lot numbers) The older one had been repurposed at one point and had the original round count oversprayed. Attached File Attached File |
|
|
Originally Posted By DP1171: Hope this helps - Couple different ones that I came across- I believe one from ‘04 and then one from ‘21? (guessing from nomenclature of lot numbers) The older one had been repurposed at one point and had the original round count oversprayed. View Quote Thank you very much, I am trying to make a reusable template for a few cans |
|
|
I asked this in the Mod H thread but this gets more traffic. What optics have been seen on the Mod H’s besides what’s posted on page 1? Also, how crucified am I gonna get for a Leupold Mk4 3.5-10x40 but with M1 turrets and non-illum reticle? Found one semi close to me for $750.
|
|
|
Originally Posted By Deadsquiggles: I asked this in the Mod H thread but this gets more traffic. What optics have been seen on the Mod H's besides what's posted on page 1? Also, how crucified am I gonna get for a Leupold Mk4 3.5-10x40 but with M1 turrets and non-illum reticle? Found one semi close to me for $750. View Quote Do it right. It sucks. Takes hours of time to dig for pics and read page 1 and troll the internet for pics.... But it's part of it. |
|
|
Originally Posted By HaveBlue83: M1 just don't look right and small amount of adjustment per turn. Sadly the custom.shop won't reopen so u can't have it converted anymore. Do it right. It sucks. Takes hours of time to dig for pics and read page 1 and troll the internet for pics.... But it's part of it. View Quote View All Quotes View All Quotes Originally Posted By HaveBlue83: Originally Posted By Deadsquiggles: I asked this in the Mod H thread but this gets more traffic. What optics have been seen on the Mod H's besides what's posted on page 1? Also, how crucified am I gonna get for a Leupold Mk4 3.5-10x40 but with M1 turrets and non-illum reticle? Found one semi close to me for $750. Do it right. It sucks. Takes hours of time to dig for pics and read page 1 and troll the internet for pics.... But it's part of it. ^^ You'll be more satisfied if you do it right the first time. I had a lot of placeholder scopes when I joined the game and I'm confident it cost me a whole lot of extra cash and time by not just holding out a bit longer at times. Lots of M3 3.5-10's illuminated and non-illum show up on the EE. Either would work and look the part. Pics of both illum and non-illum in used on page 1. Granted if you wanna go balls out you can find an old Premier vari-x III FFP : ). But a mark 4 3.5-10x40 m3 will do it and regularly show up between the EE, the bay, etc for not much more than what you're looking at paying for the M1. |
|
|
Originally Posted By HaveBlue83: M1 just don't look right and small amount of adjustment per turn. Sadly the custom.shop won't reopen so u can't have it converted anymore. Do it right. It sucks. Takes hours of time to dig for pics and read page 1 and troll the internet for pics.... But it's part of it. View Quote Originally Posted By teamjawbox: ^^ You'll be more satisfied if you do it right the first time. I had a lot of placeholder scopes when I joined the game and I'm confident it cost me a whole lot of extra cash and time by not just holding out a bit longer at times. Lots of M3 3.5-10's illuminated and non-illum show up on the EE. Either would work and look the part. Pics of both illum and non-illum in used on page 1. Granted if you wanna go balls out you can find an old Premier vari-x III FFP : ). But a mark 4 3.5-10x40 m3 will do it and regularly show up between the EE, the bay, etc for not much more than what you're looking at paying for the M1. View Quote Much appreciated, guys. I’ll keep searching. Lack of patience is the main reason my Mod 1 never got finished. On a side note, I think I need to pick up some barrel shims to replace my crush washer. The brake is installed with a crush washer currently, and I’m getting like 12 full turns before I hit the taper. I feel like I remember reading something about more than 10 turns exposes something when the can is mounted. I might be remembering incorrectly though. |
|
|
Originally Posted By Deadsquiggles: Much appreciated, guys. I’ll keep searching. Lack of patience is the main reason my Mod 1 never got finished. On a side note, I think I need to pick up some barrel shims to replace my crush washer. The brake is installed with a crush washer currently, and I’m getting like 12 full turns before I hit the taper. I feel like I remember reading something about more than 10 turns exposes something when the can is mounted. I might be remembering incorrectly though. View Quote View All Quotes View All Quotes Originally Posted By Deadsquiggles: Originally Posted By HaveBlue83: M1 just don't look right and small amount of adjustment per turn. Sadly the custom.shop won't reopen so u can't have it converted anymore. Do it right. It sucks. Takes hours of time to dig for pics and read page 1 and troll the internet for pics.... But it's part of it. Originally Posted By teamjawbox: ^^ You'll be more satisfied if you do it right the first time. I had a lot of placeholder scopes when I joined the game and I'm confident it cost me a whole lot of extra cash and time by not just holding out a bit longer at times. Lots of M3 3.5-10's illuminated and non-illum show up on the EE. Either would work and look the part. Pics of both illum and non-illum in used on page 1. Granted if you wanna go balls out you can find an old Premier vari-x III FFP : ). But a mark 4 3.5-10x40 m3 will do it and regularly show up between the EE, the bay, etc for not much more than what you're looking at paying for the M1. Much appreciated, guys. I’ll keep searching. Lack of patience is the main reason my Mod 1 never got finished. On a side note, I think I need to pick up some barrel shims to replace my crush washer. The brake is installed with a crush washer currently, and I’m getting like 12 full turns before I hit the taper. I feel like I remember reading something about more than 10 turns exposes something when the can is mounted. I might be remembering incorrectly though. Did your brake come with one of Ron’s spacers? ETA: pic for pic thread Attached File |
|
|
Originally Posted By teamjawbox: Did your brake come with one of Ron’s spacers? ETA: pic for pic thread https://www.ar15.com/media/mediaFiles/343681/IMG_5173_jpeg-3174961.JPG View Quote It might have. But I bought it when I started building my Mod 1 like 6 or 7 years ago. It was installed with shims back then but I didn’t have a can at the time so no clue if the spacing was dead on. If it came with a spacer, it’s long gone. |
|
|
Originally Posted By Deadsquiggles: It might have. But I bought it when I started building my Mod 1 like 6 or 7 years ago. It was installed with shims back then but I didn’t have a can at the time so no clue if the spacing was dead on. If it came with a spacer, it’s long gone. View Quote View All Quotes View All Quotes Originally Posted By Deadsquiggles: Originally Posted By teamjawbox: Did your brake come with one of Ron’s spacers? ETA: pic for pic thread https://www.ar15.com/media/mediaFiles/343681/IMG_5173_jpeg-3174961.JPG It might have. But I bought it when I started building my Mod 1 like 6 or 7 years ago. It was installed with shims back then but I didn’t have a can at the time so no clue if the spacing was dead on. If it came with a spacer, it’s long gone. I think I’ve got a spare if you want it, just shoot me a PM. |
|
|
|
|
|
I remembered reading several pages ago about the right thicker A2 PG that has the right side profile
Where can I find one? I have the wrong one on my MK12. |
|
Originally Posted By bradpierson26:
So I know you're a SF whore . . . . . |
Originally Posted By TheTacticalCoyote: I remembered reading several pages ago about the right thicker A2 PG that has the right side profile Where can I find one? I have the wrong one on my MK12. View Quote Shark had some of the older slightly thicker Colt A2’s recently. May be worth checking out. |
|
|
Hopefully last optic question. For a Mk4 3.5-10 M3 LR/T non illum mildot reticle, how incorrect is a 7.62mm M118LR 175gr marked elevation turret instead of the .308Win 168gr marking?
And here’s my Mod 1 before I replaced the stock with an adjustable, which will soon be my Mod H. Excuse the optic and mount. Attached File |
|
|
Originally Posted By teamjawbox: Easter family photo https://www.ar15.com/media/mediaFiles/343681/IMG_5186_jpeg-3174985.JPG View Quote There's something about black. |
|
|
Originally Posted By Deadsquiggles: Hopefully last optic question. For a Mk4 3.5-10 M3 LR/T non illum mildot reticle, how incorrect is a 7.62mm M118LR 175gr marked elevation turret instead of the .308Win 168gr marking? And here’s my Mod 1 before I replaced the stock with an adjustable, which will soon be my Mod H. Excuse the optic and mount. https://www.ar15.com/media/mediaFiles/430237/IMG_6357_jpeg-3176495.JPG View Quote If you paint the part of the elevation knob where it has the BDC cartridge data nobody will know |
|
|
|
Originally Posted By Toothpicksandkatchup: There's something about black. View Quote View All Quotes View All Quotes Originally Posted By Toothpicksandkatchup: Originally Posted By teamjawbox: Easter family photo https://www.ar15.com/media/mediaFiles/343681/IMG_5186_jpeg-3174985.JPG There's something about black. Yeah, it's boring. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Yeah, it's boring. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Toothpicksandkatchup: Originally Posted By teamjawbox: Easter family photo https://www.ar15.com/media/mediaFiles/343681/IMG_5186_jpeg-3174985.JPG There's something about black. Yeah, it's boring. Agreed. Spray all the things. Anyway, PRI tube came in today. Yanked the RAS and threw the tube on. Much gooder. RAS is gonna get sold to finance a Leupy 3.5-10, then still need a Recce rail and A107s. Need to grab a long bottom rail and MVG. Then it needs spray paint. Attached File Attached File |
|
|
Originally Posted By SecretSquirell: Yeah, it's boring. View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By Toothpicksandkatchup: Originally Posted By teamjawbox: Easter family photo https://www.ar15.com/media/mediaFiles/343681/IMG_5186_jpeg-3174985.JPG There's something about black. Yeah, it's boring. Tan would certainly blend in nicely here. We'll see! |
|
|
I'm sure a lot of you know already, but PRI re-released the original M84 charging handle with the welded hotdog latch....well kinda - they left the cutout in the latch. Mine should be arriving tomorrow, it's more clone correct than what I had.
https://www.precisionreflex.com/charging-handles/2222-original-m84-gas-buster-charging-handle-welded-military-big-latch.html |
|
|
Originally Posted By Toothpicksandkatchup: So im tempted to get one of these to use instead of my welded latch. Had no idea. They look correct to me, when compared to my original. https://live.staticflickr.com/65535/52044385600_222c973270_c.jpg View Quote View All Quotes View All Quotes Originally Posted By Toothpicksandkatchup: Originally Posted By pinball-1: I'm sure a lot of you know already, but PRI re-released the original M84 charging handle with the welded hotdog latch....well kinda - they left the cutout in the latch. Mine should be arriving tomorrow, it's more clone correct than what I had. https://www.precisionreflex.com/charging-handles/2222-original-m84-gas-buster-charging-handle-welded-military-big-latch.html So im tempted to get one of these to use instead of my welded latch. Had no idea. They look correct to me, when compared to my original. https://live.staticflickr.com/65535/52044385600_222c973270_c.jpg Not much about it is the same unfortunately. I guess it'll ensure it won't be mistaken for an original for those who know. But kind of a disappointment how many things are wrong at that price point. But will be a cool piece for folks who don't care about the small details and just want something to look the part at a distance. I do think it's cool there's something for that part of the community. |
|
|
So ur saying u want the hole filled with weld and machined so it's solid?
Hmm lol |
|
|
Does anyone have this patch that they would want to sell to me? I want one to put in my shadow box. Thanks.
Attached File |
|
Originally Posted By bradpierson26:
So I know you're a SF whore . . . . . |
|
Originally Posted By HaveBlue83: So ur saying u want the hole filled with weld and machined so it's solid? Hmm lol View Quote Nope. Unless the pics are just misleading the finish looks different on the latch and I’m assuming laser engraved. Maybe the photos on the site are just misleading? At minimum the markings are different and the pic has a solid roll pin . ETA: Not so great pic of mine on my late mod 0. Happy there’s options for folks that want one as mentioned in my OP. Attached File Attached File |
|
|
Originally Posted By teamjawbox: Nope. Unless the pics are just misleading the finish looks different on the latch and I’m assuming laser engraved. Maybe the photos on the site are just misleading? At minimum the markings are different and the pic has a solid roll pin . ETA: Not so great pic of mine on my late mod 0. Happy there’s options for folks that want one as mentioned in my OP. https://www.ar15.com/media/mediaFiles/343681/IMG_5182_jpeg-3178114.JPG https://www.ar15.com/media/mediaFiles/343681/IMG_5181_jpeg-3178116.JPG View Quote Not a bad source of the older latches. You'd have to blast and parkerize it. I wonder if they'd sell me just a latch to complete my original. Haven't had much luck finding a loose one. |
|
|
Originally Posted By Svensson: Not a bad source of the older latches. You'd have to blast and parkerize it. I wonder if they'd sell me just a latch to complete my original. Haven't had much luck finding a loose one. View Quote View All Quotes View All Quotes Originally Posted By Svensson: Originally Posted By teamjawbox: Nope. Unless the pics are just misleading the finish looks different on the latch and I’m assuming laser engraved. Maybe the photos on the site are just misleading? At minimum the markings are different and the pic has a solid roll pin . ETA: Not so great pic of mine on my late mod 0. Happy there’s options for folks that want one as mentioned in my OP. https://www.ar15.com/media/mediaFiles/343681/IMG_5182_jpeg-3178114.JPG https://www.ar15.com/media/mediaFiles/343681/IMG_5181_jpeg-3178116.JPG Not a bad source of the older latches. You'd have to blast and parkerize it. I wonder if they'd sell me just a latch to complete my original. Haven't had much luck finding a loose one. That’d be a cool project! |
|
|
Originally Posted By TheTacticalCoyote: Does anyone have this patch that they would want to sell to me? I want one to put in my shadow box. Thanks. https://www.ar15.com/media/mediaFiles/202402/IMG_8341_jpeg-3177939.JPG View Quote I’m sure I can find a spare sitting around somewhere. Shoot me a DM. |
|
IG: @tinycrumb
|
Hey everyone,
It's good to see this thread is alive and well. Where might a dude find a good source for a vintage M16A1 LPK including A1 pistol grip that would look correct in a stripped GM Hydra lower? I actually have 3 GM lowers, so need 3 LPKs minus the trigger components I guess since those will be Geissele. Thanks in advance! |
|
|
Originally Posted By CPshooter1: Hey everyone, It's good to see this thread is alive and well. Where might a dude find a good source for a vintage M16A1 LPK including A1 pistol grip that would look correct in a stripped GM Hydra lower? I actually have 3 GM lowers, so need 3 LPKs minus the trigger components I guess since those will be Geissele. Thanks in advance! View Quote IntlMilCo has those parts in stock from time to time. |
|
|
IG @bayou_bengal-rifles
|
Originally Posted By LsuJon: https://www.ar15.com/media/mediaFiles/316069/IMG_6455_jpeg-3179077.JPG View Quote |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By LsuJon: https://www.ar15.com/media/mediaFiles/316069/IMG_6455_jpeg-3179077.JPG View Quote Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats |
|
Looking for all versions of gasbuster charging handles.
|
So missing a couple of pieces that I suppose need to make her exact, the new pri retro gasbuster, is it as bad as ergo's retro grip or slightly better or worse.
I suppose items I do need to make her exact 62 grain m3 turret, Welded gasbuster, Period correct bipod adapter that is correctly marked. If anyone has any leads please message or email me. Marty |
|
|
Went and shot my Mk12 today. Loving the MK5HD
Went through a bunch of different ammo and nothing seems to be grouping 1moa or better sadly. I don't know if I was having an off day or what but I was doing pretty well with my Seekins HIT in 6.5. Attached File |
|
|
That’s typical performance. They’re 1moa performers typically but occasionally I’ll get an ammo lot or have the right weather and squeeze 3/4” 5 shots. I really don’t see anything special from the Douglas barrels.
Best performance has still been 53 and 52 gr Sierras and a moderate load. Or 69 SMK and sometimes 69 TMK Mirage will also work against you since these systems are piping hot after 10 rnds. |
|
|
Originally Posted By Yumago: Went and shot my Mk12 today. Loving the MK5HD Went through a bunch of different ammo and nothing seems to be grouping 1moa or better sadly. I don't know if I was having an off day or what but I was doing pretty well with my Seekins HIT in 6.5. https://www.ar15.com/media/mediaFiles/493545/20240407_130709_jpg-3181345.JPG View Quote What ammo/handloads did you try? |
|
|
Originally Posted By Samson-Dogg: Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats View Quote |
|
IG @bayou_bengal-rifles
|
|
Originally Posted By Samson-Dogg: Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats View Quote I wish there was a better way to know when you dudes are looking for stuff. HEAT just had 2 army specs up for $1500ea the other day in their garage sale. |
|
IG: @tinycrumb
|
|
Originally Posted By TinyCrumb: I wish there was a better way to know when you dudes are looking for stuff. HEAT just had 2 army specs up for $1500ea the other day in their garage sale. View Quote View All Quotes View All Quotes Originally Posted By TinyCrumb: Originally Posted By Samson-Dogg: Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats I wish there was a better way to know when you dudes are looking for stuff. HEAT just had 2 army specs up for $1500ea the other day in their garage sale. Who's HEAT? |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Who's HEAT? View Quote View All Quotes View All Quotes Originally Posted By SecretSquirell: Originally Posted By TinyCrumb: Originally Posted By Samson-Dogg: Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats I wish there was a better way to know when you dudes are looking for stuff. HEAT just had 2 army specs up for $1500ea the other day in their garage sale. Who's HEAT? The scope from HEAT. |
|
|
Originally Posted By UndrGrndPrdcts: The scope from HEAT. View Quote View All Quotes View All Quotes Originally Posted By UndrGrndPrdcts: Originally Posted By SecretSquirell: Originally Posted By TinyCrumb: Originally Posted By Samson-Dogg: Lucky you snagged that because I would have if I had seen it in time. I have 2 Recon Nav-spec x24's but the army-spec has eluded me so far. That was a great price with rings and everything. Congrats I wish there was a better way to know when you dudes are looking for stuff. HEAT just had 2 army specs up for $1500ea the other day in their garage sale. Who's HEAT? The scope from HEAT. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Been a long time since I posted in this thread, I am thinking about finally pulling the trigger on a can for my Mod 1
Will the AEM5 fit on Ops Inc brake/collar correct? (I don't care if it's not a Ops Inc can) |
|
"Do you want to know who you are? Don't ask. Act! Action will delineate and define you." - Thomas Jefferson
VCDL Member Volunteer Firefighter/EMT and damn PROUD to be! : Arfcom Callsign "Bucket 2" |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.