User Panel
Posted: 1/24/2024 1:38:48 AM EDT
[Last Edit: Whiskey1Alpha]
Other than the caliber, is it really just a different length barrel, trigger and the stock?
I can't really find any details on what sets them apart from these 3 things. Does it have a better/higher quality precision barrel? |
|
|
Nailed it. All it needs is a barrel to convert to .308.
I know the DMR stock is heavier but I don’t know if my 6.5 barrel is heavier than the .308 barrel. |
|
|
Originally Posted By eurotrash: Nailed it. All it needs is a barrel to convert to .308. I know the DMR stock is heavier but I don’t know if my 6.5 barrel is heavier than the .308 barrel. View Quote View All Quotes View All Quotes Originally Posted By eurotrash: Nailed it. All it needs is a barrel to convert to .308. I know the DMR stock is heavier but I don’t know if my 6.5 barrel is heavier than the .308 barrel. The barrel is a heavier profile. I don’t know how much more it actually weighs but if we look at the complete rifle weights provided by FN it’s 9.5lbs vs 8lbs. I know SSR stock weighs 17oz more than the ugg boot so it looks like about 7oz heavier for the 6.5 vs 7.62 in 16” Originally Posted By Whiskey1Alpha: Other than the caliber, is it really just a different length barrel, trigger and the stock? I can't really find any details on what sets them apart from these 3 things. Does it have a better/higher quality precision barrel? I doubt the barrel is made any differently, some of the early reports have it being less accurate than the 7.62 barrel. Don’t know if that has something to do with QC, small sample size, some issue with the light weight profile, 4 vs 6 bolt trunnion(no accuracy difference between the calibers in the 20S), or something else. |
|
|
Originally Posted By Mblades: The barrel is a heavier profile. I don’t know how much more it actually weighs but if we look at the complete rifle weights provided by FN it’s 9.5lbs vs 8lbs. I know SSR stock weighs 17oz more than the ugg boot so it looks like about 7oz heavier for the 6.5 vs 7.62 in 16” I doubt the barrel is made any differently, some of the early reports have it being less accurate than the 7.62 barrel. Don’t know if that has something to do with QC, small sample size, some issue with the light weight profile, 4 vs 6 bolt trunnion(no accuracy difference between the calibers in the 20S), or something else. View Quote The barrel is the exact same profile as the standard 17 The weight difference is + 2.2 ozs for the 6.5 Smaller bore and different muzzle device is the difference |
|
|
Originally Posted By Grinder: The barrel is the exact same profile as the standard 17 The weight difference is + 2.2 ozs for the 6.5 Smaller bore and different muzzle device is the difference View Quote View All Quotes View All Quotes Originally Posted By Grinder: Originally Posted By Mblades: The barrel is a heavier profile. I don’t know how much more it actually weighs but if we look at the complete rifle weights provided by FN it’s 9.5lbs vs 8lbs. I know SSR stock weighs 17oz more than the ugg boot so it looks like about 7oz heavier for the 6.5 vs 7.62 in 16” I doubt the barrel is made any differently, some of the early reports have it being less accurate than the 7.62 barrel. Don’t know if that has something to do with QC, small sample size, some issue with the light weight profile, 4 vs 6 bolt trunnion(no accuracy difference between the calibers in the 20S), or something else. The barrel is the exact same profile as the standard 17 The weight difference is + 2.2 ozs for the 6.5 Smaller bore and different muzzle device is the difference Where did the other ~5oz go? I don’t think bore diameter is going to make that much difference and the weights from FN are showing the same muzzle device, regardless it’s not going to be ~5oz . I’ll throws some calipers on my 7.62 if someone can measure a 6.5, just looking at them side by side and not paying that much attention the DMR looks heavier. |
|
|
I've got both, the difference is caliber, stock and trigger. Cant measure mine at the moment as the 6.5 is on it's way back to me from FN.
|
|
|
Originally Posted By Mblades: The barrel is a heavier profile. I don’t know how much more it actually weighs but if we look at the complete rifle weights provided by FN it’s 9.5lbs vs 8lbs. I know SSR stock weighs 17oz more than the ugg boot so it looks like about 7oz heavier for the 6.5 vs 7.62 in 16” I doubt the barrel is made any differently, some of the early reports have it being less accurate than the 7.62 barrel. Don’t know if that has something to do with QC, small sample size, some issue with the light weight profile, 4 vs 6 bolt trunnion(no accuracy difference between the calibers in the 20S), or something else. View Quote Accuracy issues were due to incorrect/uneven barrel torque. My 17s DMR also had incorrect torque. I retorqued it myself before taking it to the range and it did not have any accuracy issues. |
|
|
Originally Posted By eurotrash: Accuracy issues were due to incorrect/uneven barrel torque. My 17s DMR also had incorrect torque. I retorqued it myself before taking it to the range and it did not have any accuracy issues. View Quote View All Quotes View All Quotes Originally Posted By eurotrash: Originally Posted By Mblades: The barrel is a heavier profile. I don’t know how much more it actually weighs but if we look at the complete rifle weights provided by FN it’s 9.5lbs vs 8lbs. I know SSR stock weighs 17oz more than the ugg boot so it looks like about 7oz heavier for the 6.5 vs 7.62 in 16” I doubt the barrel is made any differently, some of the early reports have it being less accurate than the 7.62 barrel. Don’t know if that has something to do with QC, small sample size, some issue with the light weight profile, 4 vs 6 bolt trunnion(no accuracy difference between the calibers in the 20S), or something else. Accuracy issues were due to incorrect/uneven barrel torque. My 17s DMR also had incorrect torque. I retorqued it myself before taking it to the range and it did not have any accuracy issues. That solved everyone’s issues? I’ll have to look back through the other threads but I thought that was done by some and didn’t solve the problem. Fingers crossed that’s the fix, I’d really like to get a 6.5 barrel for my 17 but if it isn’t at least as accurate as the 7.62 I have no use for it. |
|
|
Originally Posted By Mblades: Where did the other ~5oz go? I don’t think bore diameter is going to make that much difference and the weights from FN are showing the same muzzle device, regardless it’s not going to be ~5oz . I’ll throws some calipers on my 7.62 if someone can measure a 6.5, just looking at them side by side and not paying that much attention the DMR looks heavier. View Quote I used a caliper on both barrels There is a 2 oz barrel weight difference, not 5 |
|
|
Originally Posted By eurotrash: Accuracy issues were due to incorrect/uneven barrel torque. My 17s DMR also had incorrect torque. I retorqued it myself before taking it to the range and it did not have any accuracy issues. View Quote I retorqued my barrel and I still got ~2.5-3moa accuracy out of mine. My muzzle device was incredibly tight, a gunsmith had to remove it. Sent it to FN, they tightened a couple of things (including the muzzle device) and managed to get ~1.68" out of it at 100yds. I would imagine that the gun was placed in a test fixture to shoot that group thus that might be the mechanical limit for the gun. They stated that 2" is the spec for the rifle, so 1.68" was well within good. Out of dozens of groups that I have shot, only one was smaller than 1.68. It's great that others are doing better with it. I'll keep trying. FWIW, the first five shots with my 6.5 DD5V4 at 100yds w/140gr American Gunner was .86". I guess some guns are easier to shoot well than others... |
|
|
Originally Posted By FluxIntegral: I retorqued my barrel and I still got ~2.5-3moa accuracy out of mine. My muzzle device was incredibly tight, a gunsmith had to remove it. Sent it to FN, they tightened a couple of things (including the muzzle device) and managed to get ~1.68" out of it at 100yds. I would imagine that the gun was placed in a test fixture to shoot that group thus that might be the mechanical limit for the gun. They stated that 2" is the spec for the rifle, so 1.68" was well within good. Out of dozens of groups that I have shot, only one was smaller than 1.68. It's great that others are doing better with it. I'll keep trying. FWIW, the first five shots with my 6.5 DD5V4 at 100yds w/140gr American Gunner was .86". I guess some guns are easier to shoot well than others... View Quote FWIW I am shooting steel so I couldn’t tell you with confidence how accurate my gun is, just that it hits the spot I aim for. Feeding from the magazine into the chamber on a semi-auto is pretty violent on the cartridge and could be impacting accuracy. You could try hand feeding to rule out the barrel. |
|
|
Originally Posted By Grinder: I used a caliper on both barrels There is a 2 oz barrel weight difference, not 5 View Quote View All Quotes View All Quotes Originally Posted By Grinder: Originally Posted By Mblades: Where did the other ~5oz go? I don’t think bore diameter is going to make that much difference and the weights from FN are showing the same muzzle device, regardless it’s not going to be ~5oz . I’ll throws some calipers on my 7.62 if someone can measure a 6.5, just looking at them side by side and not paying that much attention the DMR looks heavier. I used a caliper on both barrels There is a 2 oz barrel weight difference, not 5 Nice! Thanks for the update. Not the first time a manufacturer’s weights have been off or my eyes have deceived me. |
|
|
Originally Posted By Mblades: Nice! Thanks for the update. Not the first time a manufacturer’s weights have been off or my eyes have deceived me. View Quote OK, I found the error. My 6.5 DMR weights 9 lbs 2.4 Oz out of the box (not 9 1/2 lbs) My Belgian 17 weights 8 lb even SSR stock is plus 17 oz A few oz for the barrel and variables puts us in the ballpark |
|
|
So crazy person idea.
If you had a Mk20 but wanted the 17 DMR due to a shorter barrel and it being slightly lighter, yet wanted the better precision barrel on the MK20....why not just cut the Mk20 down to 16 inches? :D Or what would that royally mess up - other than the warranty? |
|
|
Originally Posted By Whiskey1Alpha: So crazy person idea. If you had a Mk20 but wanted the 17 DMR due to a shorter barrel and it being slightly lighter, yet wanted the better precision barrel on the MK20....why not just cut the Mk20 down to 16 inches? :D Or what would that royally mess up - other than the warranty? View Quote I’m 100% going to cut my 7.62 20S barrel down, 16” at the longest. It’s still a much heavier profile and the 6 bolt vs 4 bolt trunnion/ barrel extension is much beefier. I may get the barrel re-profiled to get some of the weight back but I’m still undecided about that. |
|
|
Originally Posted By Mblades: I’m 100% going to cut my 7.62 20S barrel down, 16” at the longest. It’s still a much heavier profile and the 6 bolt vs 4 bolt trunnion/ barrel extension is much beefier. I may get the barrel re-profiled to get some of the weight back but I’m still undecided about that. View Quote Would cutting the 20 barrel back to 16 or so mess with the gas/piston system or possibly cause an accuracy issue? Have never had a barrel cut, but on my M110s I have the 16 inch K version and its lighter/performs as good as the 20 inch barrels with just the velocity loss. |
|
|
Originally Posted By Whiskey1Alpha: Would cutting the 20 barrel back to 16 or so mess with the gas/piston system or possibly cause an accuracy issue? Have never had a barrel cut, but on my M110s I have the 16 inch K version and its lighter/performs as good as the 20 inch barrels with just the velocity loss. View Quote View All Quotes View All Quotes Originally Posted By Whiskey1Alpha: Originally Posted By Mblades: I’m 100% going to cut my 7.62 20S barrel down, 16” at the longest. It’s still a much heavier profile and the 6 bolt vs 4 bolt trunnion/ barrel extension is much beefier. I may get the barrel re-profiled to get some of the weight back but I’m still undecided about that. Would cutting the 20 barrel back to 16 or so mess with the gas/piston system or possibly cause an accuracy issue? Have never had a barrel cut, but on my M110s I have the 16 inch K version and its lighter/performs as good as the 20 inch barrels with just the velocity loss. Swapping gas control screws is easy. All the barre lengths have the same gas system so there isn’t any guess work involved with a 16” barrel either. I suppose there is always a risk accuracy could be affected but as long as the person doing it knows how to cut a crown it should be fine. I’ve had high dollar accurate barrels cut before without adversely effecting accuracy. |
|
|
When FN states this on the DMR:
16.25-in. Cold hammer-forged, chrome-lined, free-floating barrel with muzzle device Is the muzzle device included into the 16.25 inch length, or is it a 16.25 barrel plus whatever length of the brake extends forward? |
|
|
Originally Posted By Whiskey1Alpha: When FN states this on the DMR: 16.25-in. Cold hammer-forged, chrome-lined, free-floating barrel with muzzle device Is the muzzle device included into the 16.25 inch length, or is it a 16.25 barrel plus whatever length of the brake extends forward? View Quote Unless the muzzle device is pinned to the barrel it can’t be included in the length. I suspect that’s the barrel length without the brake. |
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.