User Panel
Originally Posted By call_me_ski: I mean, they probably work just as well on 16in guns and keep the center of gravity closer to the shooter. Either way it doesn’t fit my use case so I will not get one presently. I think a consolidated aiming module with a red dot and laser as one unit will eventually catch on. The attempts up until now have been lackluster. View Quote Wilcox BOSS seems good. Pricing is not for everyone. |
|
|
|
|
Originally Posted By tranzformer: Sig has been teasing a 7.62x39 MCX since the Gen 1. View Quote View All Quotes View All Quotes Originally Posted By tranzformer: Originally Posted By GLD1980: SIG does pretty good with 7.62x39 once they get it right. My 556R Gen2 is a pretty amazing rifle. I look forward to this. I can only hope it will drive Virtus and Rattler prices down but I doubt that will be the case. Sig has been teasing a 7.62x39 MCX since the Gen 1. Correction, since before gen 1. |
|
|
Your right...
The 553, 556R, 556XI R, they need the MCX R. |
|
Precious Metal Delivery Service
|
|
|
An ARMED SOCIETY is a POLITE SOCIETY!
|
Originally Posted By SpyHawk: Correction, since before gen 1. View Quote View All Quotes View All Quotes Originally Posted By SpyHawk: Originally Posted By tranzformer: Originally Posted By GLD1980: SIG does pretty good with 7.62x39 once they get it right. My 556R Gen2 is a pretty amazing rifle. I look forward to this. I can only hope it will drive Virtus and Rattler prices down but I doubt that will be the case. Sig has been teasing a 7.62x39 MCX since the Gen 1. Correction, since before gen 1. This being a MCX thread, I’m specifically speaking of the MCX platform. |
|
|
|
Originally Posted By tranzformer: Just get them all. https://i.ibb.co/2cvQ5QS/F8040-C06-DA79-4-E8-B-A067-54-F9037001-E9.jpg View Quote View All Quotes View All Quotes Originally Posted By tranzformer: Originally Posted By helogene: I want a 5.56 in 11.5 inch..... And a .300 Black Out 6.75 inch exchange kit.... OR..... A 6.75 inch .300 Black Out.... And a 11.5 inch 5.56 exchange kit.... Just get them all. https://i.ibb.co/2cvQ5QS/F8040-C06-DA79-4-E8-B-A067-54-F9037001-E9.jpg I'm sorry......Thanks to Pedo Joe, I'm poor...... |
|
An ARMED SOCIETY is a POLITE SOCIETY!
|
https://trademarks.justia.com/972/35/mcx-97235518.html
MCX-R4 Trademark Application of SIG SAUER |
|
|
Originally Posted By tranzformer: This being a MCX thread, I’m specifically speaking of the MCX platform. View Quote View All Quotes View All Quotes Originally Posted By tranzformer: Originally Posted By SpyHawk: Originally Posted By tranzformer: Originally Posted By GLD1980: SIG does pretty good with 7.62x39 once they get it right. My 556R Gen2 is a pretty amazing rifle. I look forward to this. I can only hope it will drive Virtus and Rattler prices down but I doubt that will be the case. Sig has been teasing a 7.62x39 MCX since the Gen 1. Correction, since before gen 1. This being a MCX thread, I’m specifically speaking of the MCX platform. So was I. |
|
|
Originally Posted By coregon: Guys, I’m not going to do a lot of commenting here, as this isn’t released. However, just know that there’s a lot of hand-wringing and doom’er speculation in here that just isn’t true. There’s also a couple of posts with technical info that are just wrong. That said, I think everyone will be happy, when we do release. View Quote @coregon can you comment on previous gen support after this new version is released? Will I be able to still get factory parts from Sig for my Virtus rifle? |
|
|
|
|
View Quote These pictures are from a dealer's market and where this gun is being introduced to them. |
|
On Time. On Target.
|
Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. View Quote View All Quotes View All Quotes Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. I have dealers around here and I’m in the market for one. |
|
|
|
Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. View Quote View All Quotes View All Quotes Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. Is that a tan anodizing? I may have to sell shit to buy one of these new ones. Damn, it looks good. |
|
|
Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. View Quote View All Quotes View All Quotes Originally Posted By coregon: These pictures are from a dealer's market and where this gun is being introduced to them. Any chance you can give us a hint at a release date/month/quarter? |
|
|
Originally Posted By RRAR15: Can’t argue with that logic. View Quote View All Quotes View All Quotes Originally Posted By RRAR15: Originally Posted By tranzformer: I have dealers around here and I’m in the market for one. Can’t argue with that logic. Glad to see there are other sensible men here. |
|
|
View Quote Dear God, it's glorious. Edit: Do I read the SKU as SOR42031? Hard to tell on my phone. |
|
|
Originally Posted By SpyHawk: Dear God, it's glorious. Edit: Do I read the SKU as SOR42031? Hard to tell on my phone. View Quote View All Quotes View All Quotes Originally Posted By SpyHawk: Dear God, it's glorious. Edit: Do I read the SKU as SOR42031? Hard to tell on my phone. That’s the romeo4 optic on it. |
|
|
@coregon Will the gen3 handguard work with gen2 uppers for either ratter gen3/gen2 and virtus gen3/2?
Thank you |
|
|
|
Originally Posted By GraniteStateMike: That’s the romeo4 optic on it. View Quote View All Quotes View All Quotes Originally Posted By GraniteStateMike: Originally Posted By SpyHawk: Dear God, it's glorious. Edit: Do I read the SKU as SOR42031? Hard to tell on my phone. That’s the romeo4 optic on it. Must be a newer model of the 4T or 4S because it's not on the system yet. |
|
Precious Metal Delivery Service
|
Will MCX Virtus be discontinued when Gen3 is released?
|
|
|
Some people shouldn't own boats. -Hollister
|
|
Originally Posted By Kublah: @coregon Will the gen3 handguard work with gen2 uppers for either ratter gen3/gen2 and virtus gen3/2? Thank you View Quote I'm legacy4lyfe, but the Gen3 seems to be the move. With regards to this question, I would suggest counting the rail slots before the handguard. If they are the same as the Virtus, at least there's a chance. |
|
|
Tagged for release information......
|
|
Does Somebody Need A Hug?
|
|
That magazine. Oh man, that would be something. More tease probably
|
|
|
|
Pete - The Firearm Blog
|
BikerNut:
Normal people like motorcycles. Real people like motorcycles. People who don't like motorcycles are just... weird. |
Pete - The Firearm Blog
|
Originally Posted By goloud: Tell me about it. We are frequently on the losing side because we follow the rules but many don’t. View Quote View All Quotes View All Quotes Originally Posted By goloud: Originally Posted By ALASKANFIRE: Embargos are pretty hard to enforce nowadays Tell me about it. We are frequently on the losing side because we follow the rules but many don’t. You're appreciated, but you're right. |
|
On Time. On Target.
|
Pete - The Firearm Blog
|
Now, if this was offered with the 5.56 and 7.62 uppers/barrel's at the time of purchase, I would without a doubt get it. Not one of these "available at a later date" or "capable"
|
|
|
Originally Posted By mark5pt56: Now, if this was offered with the 5.56 and 7.62 uppers/barrel's at the time of purchase, I would without a doubt get it. Not one of these "available at a later date" or "capable" View Quote |
|
|
Originally Posted By Daggertt: I don't have any interest in the 762, so I'll be happy getting the 556 version. View Quote View All Quotes View All Quotes Originally Posted By Daggertt: Originally Posted By mark5pt56: Now, if this was offered with the 5.56 and 7.62 uppers/barrel's at the time of purchase, I would without a doubt get it. Not one of these "available at a later date" or "capable" Same. Gen 3 11.5" 5.56 in tan would become my primary 5.56 rifle. |
|
|
Originally Posted By goloud: Tell me about it. We are frequently on the losing side because we follow the rules but many don’t. View Quote View All Quotes View All Quotes Originally Posted By goloud: Originally Posted By ALASKANFIRE: Embargos are pretty hard to enforce nowadays Tell me about it. We are frequently on the losing side because we follow the rules but many don’t. With smartphones in every corner it was bound to happen. I'm sure a bunch of these guys sneak out photos before hand and make sure they can't be traced back. I miss seeing new cool stuff. I got to shoot some XDM's before they were XDM's and they just sent them to us and asked for feedback. |
|
BikerNut:
Normal people like motorcycles. Real people like motorcycles. People who don't like motorcycles are just... weird. |
Originally Posted By tranzformer: First off, the "Gen 3" pictures have been circulating around ~9/2021 when this picture from some Sig event started floating around: https://i.imgur.com/JQw3MXB.jpg In addition, earlier this summer pictures of Cole Fackler of GBRS Group running the MCX Gen 3 in 7.62x39 started coming out. Again, pictures of the Gen3 and the 7.62x39 variant are nothing new and have been in circulation for some time. https://i.imgur.com/P9isUu6.jpg https://i.imgur.com/vtb5aW1.jpg All this free advertising for Sig only helps them and the hype machine for the Gen 3 as guys try to patiently wait for the next thing. View Quote @tranzformer I was speaking about a specific event that I may (or may not) have attended. Not just the “Gen 3 MCX” images previously released. I may (or may not) have a lot of images and new information to share as well, but I also respect that SIG has timelines, release dates, and marketing plans that need to be followed. So I follow the rules. Others don’t follow SIG’s requests which takes away from the actual release day announcement. But maintaining trust is more important than being first on a new product release. Even one as hot as a new MCX. |
|
Pete - The Firearm Blog
|
Originally Posted By goloud: I may (or may not) have a lot of images and new information to share as well, but I also respect that SIG has timelines, release dates, and marketing plans that need to be followed. So I follow the rules. Others don’t follow SIG’s requests which takes away from the actual release day announcement. View Quote So hypothetically, when could you see yourself being able to share your photos and info? |
|
|
Pete - The Firearm Blog
|
Please, call me Joe
Follow me on Instagram! http://instagram.com/tcba_joe/ |
Originally Posted By TCBA_Joe: Seriously, lame. I love a 10.5" gun. View Quote View All Quotes View All Quotes Originally Posted By TCBA_Joe: Originally Posted By coregon: It won’t have 10.5” barrel. It will be 11.5”. 10.5” was a very constrained and specific contract. Seriously, lame. I love a 10.5" gun. You have a sawzal and a tap and die set, right? If not, Harbor Freight is having a labor day sale!!!!! |
|
An ARMED SOCIETY is a POLITE SOCIETY!
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.