Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Site Notices
Page / 18
Link Posted: 5/31/2023 9:01:30 AM EDT
[#1]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By tetanurae:
https://imageshack.com/i/poZaXvcfj

AP5 SBR with some B&T accoutrements
View Quote
Hot ASF.
Is that B&T forearm? If so, would you like to comment on it?
- easy to install
- does it scratch the finish as (potentially) Knight's Arms does
- is light enough

VERY curious as it could be my next purchase.

Link Posted: 5/31/2023 9:33:10 AM EDT
[#2]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Solo_:
Hot ASF.
Is that B&T forearm? If so, would you like to comment on it?
- easy to install
- does it scratch the finish as (potentially) Knight's Arms does
- is light enough

VERY curious as it could be my next purchase.

View Quote


Yes the hand guard is a B&T. Pretty straightforward to install and get a very tight fit with the way it tensions with the front hand guard pin. I am confident a laser would hold zero with no issues. I had no problems with it scratching the finish as it doesn’t contact the gun anywhere that the factory hand guard doesn’t already, short of negligence when installing I think you’d be fine. And yes it’s light, there are plenty of lightening cut outs between picatinny sections and helps it from getting hot as well I’m sure. Honestly with how short MP5 hand guards are anyways and the guns themselves being pretty lightweight to begin with I wasn’t really considering it.
Link Posted: 5/31/2023 11:37:28 AM EDT
[Last Edit: Solo_] [#3]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By tetanurae:


Yes the hand guard is a B&T. Pretty straightforward to install and get a very tight fit with the way it tensions with the front hand guard pin. I am confident a laser would hold zero with no issues. I had no problems with it scratching the finish as it doesn't contact the gun anywhere that the factory hand guard doesn't already, short of negligence when installing I think you'd be fine. And yes it's light, there are plenty of lightening cut outs between picatinny sections and helps it from getting hot as well I'm sure. Honestly with how short MP5 hand guards are anyways and the guns themselves being pretty lightweight to begin with I wasn't really considering it.
View Quote
Terrific response/review - very grateful, now on my list.

Thanks!

ETA just to confirm, are we talking about this item ?


Link Posted: 5/31/2023 5:42:56 PM EDT
[#4]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Solo_:
Terrific response/review - very grateful, now on my list.

Thanks!

ETA just to confirm, are we talking about this item ?


View Quote



You bet, and yeah that’s the one.
Link Posted: 6/1/2023 1:08:32 AM EDT
[#5]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By tetanurae:



You bet, and yeah that's the one.
View Quote

Link Posted: 6/4/2023 4:11:27 PM EDT
[#6]
I want to get a PTR 91 but can’t decide between the 16 or 18 inch barrels…
Link Posted: 6/4/2023 5:07:46 PM EDT
[Last Edit: MagnusActual] [#7]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZgunner:
I want to get a PTR 91 but can't decide between the 16 or 18 inch barrels
View Quote

Well... Hmmm... Get both




Link Posted: 6/4/2023 6:20:11 PM EDT
[#8]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Johnny_Longslide:

Well... Hmmm... Get both




View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Johnny_Longslide:
Originally Posted By AZgunner:
I want to get a PTR 91 but can't decide between the 16 or 18 inch barrels

Well... Hmmm... Get both




Get the 16" then add a 2" long flash hider.
Link Posted: 6/4/2023 7:14:54 PM EDT
[#9]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Johnny_Longslide:

Well... Hmmm... Get both




View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Johnny_Longslide:
Originally Posted By AZgunner:
I want to get a PTR 91 but can't decide between the 16 or 18 inch barrels

Well... Hmmm... Get both





Typical Arfcom fashion. In all seriousness, if you only had one which would it be? My usage would primarily be as a range toy, just shooting drills and larping in the desert. I suppose I could hunt with it someday, but I likely won’t. I’d probably put either a red dot or an ACOG on it.
Link Posted: 6/4/2023 8:10:20 PM EDT
[Last Edit: JesseCJC] [#10]
Magpul clapped out AP5. Kinda want to try the A2 stock instead but not sure how it will perform for me with my current optic set up
Attachment Attached File
Link Posted: 6/5/2023 5:39:32 AM EDT
[#11]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JesseCJC:
Magpul clapped out AP5. Kinda want to try the A2 stock instead but not sure how it will perform for me with my current optic set up
https://www.ar15.com/media/mediaFiles/158588/IMG_3616_jpeg-2840488.JPG
View Quote
Ha.
You're the first I see with that MagPul stock here on ARFCOM; may I please have more pictures of it?

Still interested in the thang;
How's it work for you?
Link Posted: 6/5/2023 9:25:30 AM EDT
[#12]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZgunner:

Typical Arfcom fashion. In all seriousness, if you only had one which would it be? My usage would primarily be as a range toy, just shooting drills and larping in the desert. I suppose I could hunt with it someday, but I likely won't. I'd probably put either a red dot or an ACOG on it.
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZgunner:
Originally Posted By Johnny_Longslide:
Originally Posted By AZgunner:
I want to get a PTR 91 but can't decide between the 16 or 18 inch barrels

Well... Hmmm... Get both





Typical Arfcom fashion. In all seriousness, if you only had one which would it be? My usage would primarily be as a range toy, just shooting drills and larping in the desert. I suppose I could hunt with it someday, but I likely won't. I'd probably put either a red dot or an ACOG on it.

I'd say go with the one that offers what you want or the best deal.

I've heard good things about both so you really can't go wrong with either.

That's my non-answer answer. You're welcome.

Link Posted: 6/5/2023 9:39:19 AM EDT
[#13]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By JesseCJC:
Magpul clapped out AP5. Kinda want to try the A2 stock instead but not sure how it will perform for me with my current optic set up
https://www.ar15.com/media/mediaFiles/158588/IMG_3616_jpeg-2840488.JPG
View Quote


more importantly, how much did you pay for the novelty mag?
Link Posted: 6/5/2023 12:02:17 PM EDT
[#14]
Originally Posted By Solo_:
Ha.
You're the first I see with that MagPul stock here on ARFCOM; may I please have more pictures of it?

Still interested in the thang;
How's it work for you?
View Quote


I’ll get pictures with it extended later today but so far I think it works out great. I don’t have the a3 to compare it to but it locks up solid and not much play when extended. Fairly comfortable for cheek wield with low profile optics but think it may be a problem for higher set ups.
Originally Posted By colossians323:


more importantly, how much did you pay for the novelty mag?
View Quote


45 bucks, not terrible

https://www.dakotatactical.com/product/30-round-mp5-mp5k-sp5-sp5k-morale-magazine/
Link Posted: 6/5/2023 12:19:15 PM EDT
[#15]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Solo_:
Ha.
You're the first I see with that MagPul stock here on ARFCOM; may I please have more pictures of it?

Still interested in the thang;
How's it work for you?
View Quote

There was a whole thread on it, but it rolled off.

Mine locks up solid and has a not great, not terrible cheekweld when looking through the iron sights.   I do not have an A3 to compare it too, but the B&T side folder is more comfortable.  I should mention there was a burr on one of the rail slots that interfered with extending the stock, but a minute with a round file took care of that.

I keep the B&T on the gun, and the Magpul in the case if I want to swap it out for some reason.
Link Posted: 6/5/2023 3:03:30 PM EDT
[#16]
Appreciate you both!




Link Posted: 7/1/2023 8:53:17 PM EDT
[Last Edit: LOCOO331] [#17]
Attachment Attached File

My HK and its clone cousins
Link Posted: 7/1/2023 9:01:49 PM EDT
[#18]
Link Posted: 7/2/2023 12:30:24 AM EDT
[#19]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By AZgunner:
I want to get a PTR 91 but can’t decide between the 16 or 18 inch barrels…
View Quote


18" for slightly less blast and slightly more velocity.

I prefer 18" minimum on my .308 guns.
Link Posted: 7/17/2023 10:58:42 AM EDT
[Last Edit: HD2006] [#20]
Link Posted: 8/4/2023 3:30:26 PM EDT
[#21]
Link Posted: 8/10/2023 3:47:04 PM EDT
[#22]
Tax stamp approved in 37 days.

Attachment Attached File
Link Posted: 8/11/2023 12:30:27 AM EDT
[#23]
Discussion ForumsJump to Quoted PostQuote History
View Quote


@steve8140

E-form I assume?


I wanna do it thru Silencer shop

Hope I get it done right thru my phone lol
Link Posted: 8/11/2023 11:04:47 AM EDT
[#24]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By kbi:


@steve8140

E-form I assume?


I wanna do it thru Silencer shop

Hope I get it done right thru my phone lol
View Quote


@kbi

Yes, eform with two responsible people.
Fingerprints were mailed.



Pic thread:
Attachment Attached File
Link Posted: 8/11/2023 11:05:55 AM EDT
[#25]
Anyone got a picture of a MP5K (or clone) with an Eotech EXPS 3.0?  Curious what it looks like.
Link Posted: 8/11/2023 2:35:56 PM EDT
[#26]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steve8140:


@kbi

Yes, eform with two responsible people.
Fingerprints were mailed.



Pic thread:
https://www.ar15.com/media/mediaFiles/223734/3D4EC11F-2585-4062-BB3A-60A748BB7859_jpe-2915837.JPG
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By steve8140:
Originally Posted By kbi:


@steve8140

E-form I assume?


I wanna do it thru Silencer shop

Hope I get it done right thru my phone lol


@kbi

Yes, eform with two responsible people.
Fingerprints were mailed.



Pic thread:
https://www.ar15.com/media/mediaFiles/223734/3D4EC11F-2585-4062-BB3A-60A748BB7859_jpe-2915837.JPG



@steve8140

Nfa engraver down the street wants 50.p0 while I wait and silencer shop has my prints so I'm just gonna pay them the $$$


Be alot easier to aim when I'm out on my property when I'm walking around checking on stuff

Attachment Attached File
Link Posted: 8/26/2023 9:35:40 PM EDT
[#27]
Whoring this picture (sorry), different furniture on my self-assembled HK416 clone (with lots of original parts etc.)

US Mil Style HK416D by Solo__, on Flickr

Link Posted: 8/27/2023 10:55:29 PM EDT
[#28]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By kbi:



@steve8140

Nfa engraver down the street wants 50.p0 while I wait and silencer shop has my prints so I'm just gonna pay them the $$$


Be alot easier to aim when I'm out on my property when I'm walking around checking on stuff

https://www.ar15.com/media/mediaFiles/77256/20230303_194143_jpg-2916048.JPG
View Quote



That cat is adorable.
Link Posted: 8/28/2023 11:12:06 PM EDT
[#29]
One thing I love about the MP5 series is how easy it is to swap handguards/stocks.  I went back to the B&T from the A3.  I love this setup on both!
Link Posted: 9/9/2023 10:59:11 AM EDT
[#30]
(for fun - but I do change the setup, too)


HK416s vs UFO by Solo__, on Flickr
Link Posted: 9/9/2023 9:38:23 PM EDT
[#31]
Changed around the stock and mount. Seems like it will be much better than trying to get all the way down for cowitness
Attachment Attached File
Link Posted: 9/15/2023 6:47:48 PM EDT
[#32]
Link Posted: 9/16/2023 7:23:01 PM EDT
[#33]
Faux SD, now with YHM Nitro N20.

Attachment Attached File


Attachment Attached File

Link Posted: 9/17/2023 7:33:19 AM EDT
[#34]
Current configuration.

Link Posted: 9/17/2023 9:07:33 AM EDT
[#35]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By CaptShiess:
https://i.imgur.com/HZELOKD.jpg
View Quote


Any issue with the rails on the B&T collapsible scratching the finish on the receiver?
Link Posted: 9/17/2023 10:07:23 AM EDT
[#36]



Link Posted: 9/17/2023 11:34:36 AM EDT
[#37]
Link Posted: 9/17/2023 5:58:30 PM EDT
[#38]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 1911nick:


Any issue with the rails on the B&T collapsible scratching the finish on the receiver?
View Quote View All Quotes
View All Quotes
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By 1911nick:
Originally Posted By CaptShiess:
https://i.imgur.com/HZELOKD.jpg


Any issue with the rails on the B&T collapsible scratching the finish on the receiver?


No it’s great.  My only complaint if that they didn’t put the stock in a way that it was smooth on your cheek instead of the adjustment bumps.  It’s not totally uncomfortable, but it could be better
Link Posted: 9/18/2023 9:55:30 AM EDT
[#39]


My MKE (Century) with Navy SEF lower, Aimpoint Comp M3 in repro arms mount, AC unity full stock, and a surefire 628. Simple, effective, and beautiful...as all MP5's should be!
Link Posted: 9/18/2023 11:19:37 AM EDT
[#40]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By droys86:
https://i.imgur.com/2ybWq6X.jpg

My MKE (Century) with Navy SEF lower, Aimpoint Comp M3 in repro arms mount, AC unity full stock, and a surefire 628. Simple, effective, and beautiful...as all MP5's should be!
View Quote
One of the most classic setups (that still works today) of them all - ever.

Love it
Link Posted: 9/19/2023 12:02:45 AM EDT
[#41]
Link Posted: 9/19/2023 12:47:02 PM EDT
[#42]
Attachment Attached File


Hadn't shot it in months


Still no where near 500rds

But it's only failed to feed once


Has ate

115gr pmc

Remington and cci 124 great

And last night I put 15rds of Remington 147gr

Combined with the yhm r9 then it was quite


Still loud with the 124gr


Need to form 1 it
Link Posted: 9/19/2023 2:03:20 PM EDT
[#43]
Link Posted: 9/25/2023 2:25:00 PM EDT
[#44]
Discussion ForumsJump to Quoted PostQuote History

How is the Manticore fit pined into the receiver compared to the Choate?
Link Posted: 9/25/2023 8:40:28 PM EDT
[#45]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By kbi:
https://www.ar15.com/media/mediaFiles/77256/20230918_191744_jpg-2959345.JPG

Hadn't shot it in months


Still no where near 500rds

But it's only failed to feed once


Has ate

115gr pmc

Remington and cci 124 great

And last night I put 15rds of Remington 147gr

Combined with the yhm r9 then it was quite


Still loud with the 124gr

Need to form 1 it

View Quote


"Need to form 1 it." Yep and get that AP5-P.  
Link Posted: 9/30/2023 6:24:32 PM EDT
[Last Edit: MagnusActual] [#46]
Link Posted: 9/30/2023 7:03:55 PM EDT
[#47]
Discussion ForumsJump to Quoted PostQuote History
View Quote
I continue to be infatuated with KAC rails for all rifles (and SMGs) but I still didn't bring myself to get one for my AP5

Link Posted: 9/30/2023 7:53:58 PM EDT
[#48]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Solo_:
I continue to be infatuated with KAC rails for all rifles (and SMGs) but I still didn't bring myself to get one for my AP5

View Quote
That's the Cadex Defense rail.
Link Posted: 10/1/2023 9:17:14 AM EDT
[#49]
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By D_Man:
That's the Cadex Defense rail.
View Quote
... probably even better - and certainly more affordable

HKs and stuff by Solo__, on Flickr

Link Posted: 10/22/2023 11:52:18 AM EDT
[Last Edit: GuynamedDave] [#50]


PTR 9ct
Eotech XPS2
A3f stock
B&T TL99 handguard
SiCo Octane 2.0
Magpul selector
Page / 18
Top Top