Equipment Exchange

*BUY HERE*
Bare Necessities AR15 Complete LPK with Aluminium Trigger Guard + RTB Enhanced Nickel TEFLON Plated Trigger Assembly

RTB Enhanced Nickel TEFLON Plated Trigger Assembly:

Our Enhanced Trigger Assemblies are built on a traditional Mil-Spec foundation with some key upgrades for increased performance. All components are sourced from US .mil contractors that meet or exceed military specifications. Triggers and hammers are made from 8620 steel and properly heat treated. Trigger sear surfaces maintain correct geometry and are polished prior to heat treatment to ensure that surface hardened material is never removed. Triggers, hammers, and disconnectors receive our proprietary electroless Nickel Teflon finish for increased lubricity and corrosion protection.

We've taken it a step further and hand-selected hammer springs that keep the pull weight on the low end of the spectrum. Every single trigger assembly is checked with a pull gauge to ensure that pull weight is between 5 to 5 1/2 pounds.

PLEASE NOTE: We no longer polish the trigger sear surfaces after the plating process. Sear surfaces are only polished prior to heat treatment. Triggers are already very slick and will polish themselves during regular usage fairly quickly, however, you can polish them yourself with some Flitz (or similar polish) on a flat paper surface. The Nickel Teflon will polish very easily, so do not use sandpaper or anything else abrasive, and be careful to not remove any material.

Features:

• All components are machined and heat treated to mil-spec
• Mil-spec geometry and reliability maintained
• Trigger sear surfaces are polished before heat treatment
• Proprietary Nickel TEFLON finish
• Springs are hand selected to produce a 5 to 5 1/2 pound trigger pull

Includes:

• Polished trigger
• Hammer
• Disconnector
• Trigger and hammer pins
• Trigger, hammer, and disconnector springs

Bare Necessities LPK:
With everything you need for a complete lower, including every spring, pin, the Bare Necessities LPK makes your rifle truly complete by including the all-important Safety, Mag Catch, Take Down, and A2 Standard Grip. This kit also features an ALUMINUM Trigger Guard.

Components:

• Selector
• Selector Spring
• Selector Detent
• Magazine Catch
• Magazine Catch Spring
• Aluminum Magazine Catch Button
• Bolt Catch
• Bolt Catch Detent
• Bolt Catch Spring
• Bolt Catch Roll Pin
• Take Down Pin Take Down Detent
• Take Down Detent Spring
• Front Pivot Pin
• Front Pivot Pin Detent
• Front Pivot Pin Detent Spring
• Aluminum Trigger Guard
• Trigger Guard Roll Pin
• Buffer Retainer Detent
• Buffer Retainer Spring
• A2 Pistol Grip
• Pistol Grip Screw
• Pistol Grip Screw Washer