User Panel
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: Finally got to take her out with the new barrel. Didn't go out to shoot tiny groups, just to zero, but this barrel does like the PSA AAC 77gr SMK. When I was getting rough zero at 50, they were stacking right on each other. https://www.ar15.com/media/mediaFiles/204916/20240527_133540-3225006.jpg View Quote But why no paint? Also, no such thing as ‘didn’t go out to shoot tight groups.’ Do you want a shitty zero, or is your glass on? Shoot tight groups, or don’t shoot at all. Upper right is a 3rd (almost on) and 5rd (we’re zeroed) group. Attached File Attached File ETA: I know I need to paint this cunt |
|
|
I don't remember if I had the old barrel painted or not. Usually, it's all hidden under my fake can.
The zero is spot-on, I just didn't take the time to wring out any movement out of my setup and just to verify function and break it in a bit. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
|
Originally Posted By SecretSquirell: Finally got to take her out with the new barrel. Didn't go out to shoot tiny groups, just to zero, but this barrel does like the PSA AAC 77gr SMK. When I was getting rough zero at 50, they were stacking right on each other. https://www.ar15.com/media/mediaFiles/204916/20240527_133540-3225006.jpg View Quote |
|
|
Originally Posted By HaveBlue83: that scope tho........... View Quote View All Quotes View All Quotes Originally Posted By HaveBlue83: Originally Posted By SecretSquirell: Finally got to take her out with the new barrel. Didn't go out to shoot tiny groups, just to zero, but this barrel does like the PSA AAC 77gr SMK. When I was getting rough zero at 50, they were stacking right on each other. https://www.ar15.com/media/mediaFiles/204916/20240527_133540-3225006.jpg And stock |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Wet worx has gen 3 stocks available. Are those being made again?
|
|
|
|
|
|
Originally Posted By Three0h8: Where I'm at: https://i.imgur.com/goNph5U.jpg Where I'm trying to go: https://cdn11.bigcommerce.com/s-70fo0g802l/product_images/uploaded_images/bf97d8b796f808502860217211ec9b71.jpg I am waiting on a milspec dust cover, trigger, and need to find an FDE magpul ACS for it. View Quote I do love the look of the Socom Stock but that ACS has always called to me!! I might have to just build another fucking H.................... |
|
|
|
Originally Posted By Three0h8: Where I'm at: https://i.imgur.com/goNph5U.jpg Where I'm trying to go: https://cdn11.bigcommerce.com/s-70fo0g802l/product_images/uploaded_images/bf97d8b796f808502860217211ec9b71.jpg I am waiting on a milspec dust cover, trigger, and need to find an FDE magpul ACS for it. View Quote Were in the same boat |
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By teamjawbox: Out on the front of the rail there's a screw that secures the Recce rail to a lug in the 12 o'clock picatinny rail. Sorry for the crap photos. Only photos I had handy. Pic of location from side view https://www.ar15.com/media/mediaFiles/343681/IMG_5402_jpeg-3213613.JPG Pic of what the stud looks like, albeit there's two on the pic rail and this is the one further out just for an example. https://www.ar15.com/media/mediaFiles/343681/IMG_5403_jpeg-3213614.JPG View Quote View All Quotes View All Quotes Originally Posted By teamjawbox: Originally Posted By CTM1: Originally Posted By metalsaber: Question for the H owners. Putting aside any clone correctness to the question. The Recce rail section. What actual benefit do you see it providing. I'm struggling to find a use where I "need" it vs it's just a pure clone thing. Curious about the Recce rail as it relates to adding any rigidity in alignment to the forearm for use with NV/Thermal Clip-On's. PRI says the Recce rail "ties the receiver to the PRI carbon fiber forearms top rail". Perhaps I am wrong but I do not see where the front of the rail gets mechanically tied to the forearm. @M4AZ I have had a PVS-26, 30, and 27 and all were mounted to traditional machined rails so I am curious about the carbon fiber/accessory rail set up you are utilizing to mount your KAC PVS-30. I see you removed the Recce rail with your new scope setup. Assuming it did not add any benefit as far as rigidity to the forearm. So given your current setup are you completely comfortable with your 30 being attached solely to that style of accessory rail on a carbon fiber forearm? Have you noticed any lack of rigidity or flex given the weight of the 30?. Thanks Out on the front of the rail there's a screw that secures the Recce rail to a lug in the 12 o'clock picatinny rail. Sorry for the crap photos. Only photos I had handy. Pic of location from side view https://www.ar15.com/media/mediaFiles/343681/IMG_5402_jpeg-3213613.JPG Pic of what the stud looks like, albeit there's two on the pic rail and this is the one further out just for an example. https://www.ar15.com/media/mediaFiles/343681/IMG_5403_jpeg-3213614.JPG |
|
I bought all this equipment. What do you mean that the dead AREN'T coming back to life?
|
Shot mine out to 700 today. Did great.
|
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By SecretSquirell: I got 200. And knocked my steel over after 3 rounds, so I just shot rocks instead of driving around to fix it. View Quote Drive to the 200m target? My knife hand is starting to unholster Just messing with ya I think ranges need complimentary golf carts or something lol |
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
"The only thing more boring than shooting groups is looking at other people's groups on the internet." -erud
|
|
Finally got my H together and went to mount the scope. First time trying to get one of the #22 rings on the fucking mount clamp failed under considerable low pressure. Looks like its not uncommon after finding another failure posted elsewhere at the same spot. But still sucks like hell
|
|
|
Originally Posted By TheSogster: Finally got my H together and went to mount the scope. First time trying to get one of the #22 rings on the fucking mount clamp failed under considerable low pressure. Looks like its not uncommon after finding another failure posted elsewhere at the same spot. But still sucks like hell View Quote What do you mean ‘failed under considerable low pressure?’ |
|
|
When I was locking it into place I wasn't applying much force to the arm. The first one got noticeably tighter as the arm got to its final lock down position. I had just barely started the clamp down on the second one when it happened.
It failed in the same location as this persons https://www.reddit.com/r/MilitaryARClones/comments/11oxng0/arms_22_med_rings_broke/#lightbox |
|
|
I've snapped a few levers back in my .mil days with seemingly little pressure. I've also had levers that required prying tools to lock and unlock that didn't break.
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Originally Posted By TheSogster: When I was locking it into place I wasn't applying much force to the arm. The first one got noticeably tighter as the arm got to its final lock down position. I had just barely started the clamp down on the second one when it happened. It failed in the same location as this persons https://www.reddit.com/r/MilitaryARClones/comments/11oxng0/arms_22_med_rings_broke/#lightbox View Quote Damn. Wonder if that’s caused by a pic rail that’s out of spec or the ARMS mount having a flaw. Maybe a little of both? |
|
|
Seemed like a defective part to me. The other one went on fine with considerably more force than I applied to the one that broke. This was my first time using it and it was brand new, so its not like it experiences fatigue in the past.
|
|
|
Originally Posted By BlueDevilBrew: https://i.postimg.cc/Y0LD5V4Y/IMG-3492-1.png View Quote Very cool pic. Acog looks boss on that holland |
|
|
|
|
Originally Posted By M4AZ: Picked up some mk4 rings for the Leupold scope. H’s just don’t look right without the recce top rails to me and it sat to high with a 1.5 ims mount with the rail when using with a clip on. Got some 1.06 rings and we’re back in business. https://i.postimg.cc/pLwv7cCr/5-C6-FF0-B2-88-AC-4402-91-E3-26861-F28316-C.jpg https://i.postimg.cc/L6smZ1h9/IMG-6528.jpg View Quote I've been thinking of doing that very same thing. |
|
|
|
For those looking for TRRs, Mounts Plus just filled my backorder. Don'tknow if they've got extra for stock or not but it's worth checking.
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
|
Anyone have a lt104 they're not using?
|
|
|
|
Originally Posted By wissota4: Anyone have a lt104 they're not using? View Quote PM me. Pic thread: Attached File |
|
|
Anybody looking for a Leupold Mark 4 2.5-8x36 MR/T M1 Illum. Mildot? shoot me a message.
|
|
|
Originally Posted By AWHAILYEAH: Which Optic and mount configuration for the 6mm ARC Clone of my Mod H Clone?? I could go with the MK5 in the FDE IMS mount not pictured or stick with either the Mil Dot x32 or Mil/Mil x24 in either the M110 Tano Mount or the A107's................ https://i.imgur.com/nysv2mm.jpg https://i.imgur.com/FgFTtQ2.jpg https://i.imgur.com/TU79Sek.jpg https://i.imgur.com/q5Kfc6l.jpg I like the SOCOM but I fucking love the ACS on this setup and since I had this badass unfired CLE 15.1" Recce barrel just sitting I decided to build a Mod H Clone of my H Clone only in 6 ARC with the ACS........................ View Quote I say put the highest mag/best glass quality on it that’s clone correct. 6ARC is meant to be a distance cartridge, so put some glass on it that can take advantage of that BC. ETA: spiellin’ |
|
|
Originally Posted By towerofpower94: I say put the highest mag/best glass quality on it that’s clone correct. 6ARC is meant to be a distance cartridge, so put some glass on it that can take as a tags if that BC. View Quote View All Quotes View All Quotes Originally Posted By towerofpower94: Originally Posted By AWHAILYEAH: Which Optic and mount configuration for the 6mm ARC Clone of my Mod H Clone?? I could go with the MK5 in the FDE IMS mount not pictured or stick with either the Mil Dot x32 or Mil/Mil x24 in either the M110 Tano Mount or the A107's................ https://i.imgur.com/nysv2mm.jpg https://i.imgur.com/FgFTtQ2.jpg https://i.imgur.com/TU79Sek.jpg https://i.imgur.com/q5Kfc6l.jpg I like the SOCOM but I fucking love the ACS on this setup and since I had this badass unfired CLE 15.1" Recce barrel just sitting I decided to build a Mod H Clone of my H Clone only in 6 ARC with the ACS........................ I say put the highest mag/best glass quality on it that’s clone correct. 6ARC is meant to be a distance cartridge, so put some glass on it that can take as a tags if that BC. Yeah man you pretty much told me what I've been telling myself and know...................... |
|
|
Originally Posted By AWHAILYEAH: Yeah man you pretty much told me what I've been telling myself and know...................... View Quote Attached File Holland shit Attached File |
|
|
|
Originally Posted By Three0h8: https://i.imgur.com/akFjQTX.jpeg My H&R lower came in and I was finally able to get it built up View Quote Beautiful. Now paint that bish. |
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
I’m going to when it’s not 100 outside lol. Probably just brown and tan
|
|
|
Originally Posted By UndrGrndPrdcts: https://www.ar15.com/media/mediaFiles/261626/20240605_193951_jpg-3233368.JPG https://www.ar15.com/media/mediaFiles/261626/20240605_193900_jpg-3233369.JPG View Quote @UndrGrndPrdcts Remind me again what mount and height you went with on that MK5? |
|
|
God will not look you over for medals, diplomas, or degrees – but for scars
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.