User Panel
Quoted:
SBA4 video. https://www.youtube.com/watch?v=zlXGz5AenQw View Quote What an absolute monkey. |
|
Best thing I've found to remedy the lack of colors available in the SBA3 is to just get a black one and then get a Splitfix in whatever color you want to get the contrast you're looking for. I actually have two black ones with Splitfixes for just that reason. One with wolf grey and one with OD green. I also have an FDE SBA3 and wish I'd just gotten a black one and used a tan Splitfix as the SB FDE is much darker than what Magpul's version is. But that's just me being picky
|
|
I’m trying to figure out where PSA got their gray ones. I don’t see SBA3 braces in gray anywhere else but with the PSA pistol kit.
Do you think that they are painted? |
|
|
I mean...it is possible to paint things...I get that on a rubber brace it would chip off and not work well, but it is within the realm of possibility.
I also kind of doubt they are painted, but I’d like to know before I buy a pistol kit I don’t need so I can satisfy my vanity with a gray brace. Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. |
|
Quoted:
I mean...it is possible to paint things...I get that on a rubber brace it would chip off and not work well, but it is within the realm of possibility. I also kind of doubt they are painted, but I’d like to know before I buy a pistol kit I don’t need so I can satisfy my vanity with a gray brace. Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. View Quote |
|
Quoted:
Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. View Quote These guys have some SBA3's that have been cerokoted in that link, though it looks like stock is out. Perhaps they can do special orders. |
|
SBA3 with grey Splitfix
Here is one of my pistols with a grey Splitfix. A grey SBA3 would look nice but I was happy enough with just the strap. It at least gives it some contrast. |
|
Quoted: Bkings cerokoted braces These guys have some SBA3's that have been cerokoted in that link, though it looks like stock is out. Perhaps they can do special orders. View Quote |
|
|
You guys could just dye the thing. Look up Holtworks on Instagram....he's done this on a ton of plastic part stuff and it turns out very well.
|
|
Quoted:
Quoted:
I mean...it is possible to paint things...I get that on a rubber brace it would chip off and not work well, but it is within the realm of possibility. I also kind of doubt they are painted, but I'd like to know before I buy a pistol kit I don't need so I can satisfy my vanity with a gray brace. Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. |
|
Quoted:
It's a PSA exclusive. I asked in their industry forum. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I mean...it is possible to paint things...I get that on a rubber brace it would chip off and not work well, but it is within the realm of possibility. I also kind of doubt they are painted, but I'd like to know before I buy a pistol kit I don't need so I can satisfy my vanity with a gray brace. Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. |
|
Just ordered one for my first pistol build. Brownells is running 10% off and free shipping today.
|
|
so I understand the end cap will be pushed out if you retract the stock all the way? is this true and if so when will it be fixed if ever?
is there a compact version and is CMMG the only retailer of it? did they fix the end cap issue on this model? thanks for feedback. |
|
Quoted:
so I understand the end cap will be pushed out if you retract the stock all the way? is this true and if so when will it be fixed if ever? is there a compact version and is CMMG the only retailer of it? did they fix the end cap issue on this model? thanks for feedback. View Quote |
|
Guys I need your help.
I have an LWRC DI 5.56 10.5” and the factory buffer tube is 6” but the tube provided with the SBA3 is 7.25”. LWRC advised me I would need a new buffer and spring cuz of the SB Tactical added buffer tube length. Is this what y’all have done (added a new buffer and spring)? Or is LWRC different than most AR pistols with its 6” buffer tube? |
|
If this is the gun you have I see no need for a change: https://www.lwrci.com/p-5246-ic-di-pistol-brace-556.aspx
"Mil-Spec, 6-Position Buffer Tube H2 Buffer and Mil-Spec Buffer Spring" They should both be approx 7" deep interior to the tube. I just measured the inside of a spare SBA3 tube and it's approx. 7". Looks like on the firearm you have, they shortened the butt. Everything else appears "mil-spec". Tubes come in different lengths and some have a plug in the rear or some other matter. The insides will be the same on a carbine tube. Buffer and spring specs are the same on both of their braces. |
|
Quoted:
If this is the gun you have I see no need for a change: https://www.lwrci.com/p-5246-ic-di-pistol-brace-556.aspx "Mil-Spec, 6-Position Buffer Tube H2 Buffer and Mil-Spec Buffer Spring" They should both be approx 7" deep interior to the tube. I just measured the inside of a spare SBA3 tube and it's approx. 7". Looks like on the firearm you have, they shortened the butt. Everything else appears "mil-spec". Tubes come in different lengths and some have a plug in the rear or some other matter. The insides will be the same on a carbine tube. Buffer and spring specs are the same on both of their braces. View Quote |
|
Quoted: It is the gun I have but it’s tube is 6” View Quote Yeah, I see your point now. Do you know if the brace only of the SBA3 will slide on to your existing extension? The existing extension would need to be "mil-spec" diameter. If it does, It likely wouldn't have the number of positions advertised for the SBA3. After all is said and done, I'd probably install the complete kit and purchase a carbine length buffer and spring. |
|
|
|
Quoted: Nope. But PSA's price is pretty competitive. $150 shipped for the SBA3 EPT lower build kit. I snagged a couple. Kept the braces and sold everything else off on the forum. Its a little extra work, but the cost of the brace comes out pretty decent. They most certainly aren't painted. PSA has professional relationships with various other companies. I think SBA tactical is building PSA's exclusive triangle brace, too. The Gray and tan SBA3 braces I got from PSA actually have the PSA logo molded into the rear plug. So SBA Tactical is making special production runs just for Palmetto State. https://i.ibb.co/4mfJrF8/Screenshot-20190225-122142.png View Quote View All Quotes View All Quotes Quoted: Nope. But PSA's price is pretty competitive. $150 shipped for the SBA3 EPT lower build kit. I snagged a couple. Kept the braces and sold everything else off on the forum. Its a little extra work, but the cost of the brace comes out pretty decent. They most certainly aren't painted. PSA has professional relationships with various other companies. I think SBA tactical is building PSA's exclusive triangle brace, too. The Gray and tan SBA3 braces I got from PSA actually have the PSA logo molded into the rear plug. So SBA Tactical is making special production runs just for Palmetto State. https://i.ibb.co/4mfJrF8/Screenshot-20190225-122142.png Quoted:
Anybody prefer the SOB over the SBA3? I've got one on my Spike's Honey Badger lower. I've considered swapping out for an SBA3 but it grew on me so I left it alone. |
|
Picking up my MK18 FDE pistol tomorrow. My black SBA3 brace will be delivered Monday.
|
|
|
Quoted:
I do for some of my guns. Got a couple AKs wearing SOB braces. Those are my 2 go-to braces - SBA3 and SOB. Maybe the SBA4 will knock them both off the top of my mountain. View Quote I'm thinking an A1 style upper and the SBA4 are in my future for a retroish pistol 10.5/11.5 build. 733 style or similar. We shall see. |
|
Just bought an SBA3, new from Brownells, and it seems to have quite a bit of left-to-right wobble on the buffer tube. More so than what I was expecting for a brace of this price point. It’s not as significant as say.. a Magpul MOE stock’s wobble. I was more hoping for the snug fit of something like the MFT Minimalist stock.
Any input would be appreciated! Can text/e-mail a video of the wobble if anyone would be willing to help me out compared to their SBA3. Thanks! |
|
I’m currently still doing some research on braces trying to decide on the right one.
Half of me wants to take the cheaper route but then there’s half of me that wants to get the SBPDW, but the weight on it makes me a bit nervous. |
|
Quoted:
It's a PSA exclusive. I asked in their industry forum. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I mean...it is possible to paint things...I get that on a rubber brace it would chip off and not work well, but it is within the realm of possibility. I also kind of doubt they are painted, but I'd like to know before I buy a pistol kit I don't need so I can satisfy my vanity with a gray brace. Anybody seen gray anywhere else? If this is a PSA exclusive their marketing team should be loud and proud about it. |
|
Quoted:
Just bought an SBA3, new from Brownells, and it seems to have quite a bit of left-to-right wobble on the buffer tube. More so than what I was expecting for a brace of this price point. It’s not as significant as say.. a Magpul MOE stock’s wobble. I was more hoping for the snug fit of something like the MFT Minimalist stock. Any input would be appreciated! Can text/e-mail a video of the wobble if anyone would be willing to help me out compared to their SBA3. Thanks! View Quote |
|
Quoted: That's odd, moves so snug it's a bit annoying to adjust, but I hardly ever have a need ri adjust it so... I'd rather have this problem than to loose. Maybe call and see if they will exchange it? Brownell's does have a pretty awesome guarantee. View Quote |
|
Quoted: That's odd, moves so snug it's a bit annoying to adjust, but I hardly ever have a need ri adjust it so... I'd rather have this problem than to loose. Maybe call and see if they will exchange it? Brownell's does have a pretty awesome guarantee. View Quote Watching a couple YouTube videos and it seems that the little bit of wobble isn’t unusual for this brace. I’ll wait to hear what SB Tactical themselves has to say but otherwise I’ll just live with it! |
|
Quoted: Brownells wants me to send it back, wait 7-10 days for them to "process," and then they will send me another one back out. Watching a couple YouTube videos and it seems that the little bit of wobble isn’t unusual for this brace. I’ll wait to hear what SB Tactical themselves has to say but otherwise I’ll just live with it! View Quote Try some shim stock on the buffer tube. Think vinyl wrap. I did this on two of my builds using the SBA3 brace / PWS buffer tubes. The tubes that came with the SBA3's were nice and tight, but I like my PWS fluted tubes. You won't need much, experiment with a little at a time. You CAN get these to fit as tight as the MFT BMS stocks. Trust me. No need to fart around sending it back.. |
|
Quoted: Nate, Try some shim stock on the buffer tube. Think vinyl wrap. I did this on two of my builds using the SBA3 brace / PWS buffer tubes. The tubes that came with the SBA3's were nice and tight, but I like my PWS fluted tubes. You won't need much, experiment with a little at a time. You CAN get these to fit as tight as the MFT BMS stocks. Trust me. No need to fart around sending it back.. View Quote Appreciate the reply! That seems like a good option. Sending you an IM now for more details. |
|
|
Quoted:
Just bought two and did not realize they do not come with castle nuts How freaking annoying that they are not included. My intent was to use them with LAW TAC side folders and now I just read that is a no no given the combo is longer than the ATF allow/likes/suggests. View Quote |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.