User Panel
Quoted:
How about an A.R.M.S. S.I.R. on a Windham, ME-made Bushmaster? https://www.AR15.Com/media/mediaFiles/76904/001-685755.JPG View Quote Speaking of A.R.M.S., Dick Swan passed away a few months ago. Didn’t hear about it until recently. |
|
Quoted: That looks a little familiar. Speaking of A.R.M.S., Dick Swan passed away a few months ago. Didn’t hear about it until recently. View Quote |
|
I discovered this thread today and I am pleased ARMS #50 with the discontinued top rail.
Attached File If any of you guys ever played Metal Gear Solid 4, you might recognize this build that emerged from the first few trailers in the early 2000’s. It should have an old Eotech 552 or a Comp M2 and the muzzle device should be an OTB mount for a suppressor with a Troy Medieval brake at the end, but I’ve changed it around for what I had on hand. It’s an old build, but it always stuck with me. I scrapped my Block II-ish for this and don’t regret it Attached File |
|
The first upper I built, replaced my A2 HBAR that I had on this post ban bushy lower. Replaced the A2 stock with a VLTOR tube and stock kit. Also have a Tango Down VFG and bipod somewhere for this gun as well...
Built circa 2004.... DD M4 12.0 Modified PRI gas block Denny's Guns 16" mid-length Recon Barrel on LMT M4 upper w/matched bolt Trijicon TA-50 red chevron in Larue mount Bushmaster (Windham, ME) lower, used to have an LMT 2 stage trigger, but replaced later with Geissele SD-C trigger Tango Down grip Attached File |
|
Quoted:
Quoted: That looks a little familiar. Speaking of A.R.M.S., Dick Swan passed away a few months ago. Didn’t hear about it until recently. |
|
Quoted:
The first upper I built, replaced my A2 HBAR that I had on this post ban bushy lower. Replaced the A2 stock with a VLTOR tube and stock kit. Also have a Tango Down VFG and bipod somewhere for this gun as well... Built circa 2004.... DD M4 12.0 Modified PRI gas block Denny's Guns 16" mid-length Recon Barrel on LMT M4 upper w/matched bolt Trijicon TA-50 red chevron in Larue mount Bushmaster (Windham, ME) lower, used to have an LMT 2 stage trigger, but replaced later with Geissele SD-C trigger Tango Down grip https://www.AR15.Com/media/mediaFiles/49527/IMG_0123small_JPG-726683.JPG View Quote |
|
Thanks Lumpy!
I beg forgiveness for the picture, but it proves that nothing really ever changes..... Oh and duckbill grip on middle carbine Attached File |
|
Quoted:
How about an A.R.M.S. S.I.R. on a Windham, ME-made Bushmaster? https://www.AR15.Com/media/mediaFiles/76904/001-685755.JPG View Quote |
|
Pentagon Light, CMMG (remember tactical bacon?), and Sully stocks.
Honorable mention: OD green (in general) |
|
Quoted:
Can someone tell me what in the actual eff this thing is...? https://i.ibb.co/y5D46ST/A293192-A-5-AE7-4-D8-B-92-A8-B304105-A1-F75.jpg View Quote |
|
Quoted:
Can someone tell me what in the actual eff this thing is...? https://i.ibb.co/y5D46ST/A293192-A-5-AE7-4-D8-B-92-A8-B304105-A1-F75.jpg View Quote LINK ANOTHER |
|
|
|
Quoted:
I just looked, pricing doesn't seem too bad, I think the trouble is they only offer the kit. While they offer the A2 stock as a kit or assembly. I still use mine from time to time, but it just ends up being a placeholder until I get a deal on a carbine stock, then it goes back in the parts bin. Everytime I try to build a rifle out of spare parts, I just end up with the same pile of spare parts by time I'm done. View Quote View All Quotes View All Quotes Quoted:
Quoted:
+1 on the RRA entry, night and day difference. And pricing is crazy high. I'm probably one of the few that like them. But then again, I can almost shoot with a CAR completely collapsed, short in arms. While they offer the A2 stock as a kit or assembly. I still use mine from time to time, but it just ends up being a placeholder until I get a deal on a carbine stock, then it goes back in the parts bin. Everytime I try to build a rifle out of spare parts, I just end up with the same pile of spare parts by time I'm done. |
|
Quoted:
I thought I was the shit when I sprung for a couple of these https://i.imgur.com/TZJk3I1.jpg View Quote Now debating between the M&A CAR and Sully stock. Sully would be an easy choice if it weren’t so pricy. |
|
Quoted:
Just bought one of these on the cheap along with a blem LMT A2 upper. Should be a fun build. Now debating between the M&A CAR and Sully stock. Sully would be an easy choice if it weren’t so pricy. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I thought I was the shit when I sprung for a couple of these https://i.imgur.com/TZJk3I1.jpg Now debating between the M&A CAR and Sully stock. Sully would be an easy choice if it weren’t so pricy. |
|
|
Quoted:
Saw your CAR in the EE too. Might snatch it up if you happen to have an extra John Masen style recoil pad in the parts bin, Brownells has been OOS for awhile. View Quote View All Quotes View All Quotes |
|
Quoted:
Not JM but I do have one in a box.....I'd have to look. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
CAR. Negative. Mine is an SOG pad, for waffle stocks, IIRC? |
|
|
Z-M Weapons LR-300 was awesome looking, but seldom encountered.
Attached File Attached File The ones produced after Para bought them out didn't look as cool. |
|
Where does all of this stuff end up?
If folks have it laying around in parts bins I would like to see some of it become available. |
|
View Quote I still think they’re sexy. |
|
Man this thread takes me back.
I'm still using a Badger Ordnance tactical latch on my rifle that sees the highest round count. I actually like it quite a bit. Enough that I might actually order another tac latch. I had a Trijicon Reflex sight. The model with the big orange triangle. I had both the cantilever mount for mounting it in front of a carry handle and later a GG&G accucam mount for a picatinny rail. 'Drop in' quad rails of various designs. I still remember when ABC were the big three. I even remember still seeing quite a few ACOGs at 3-gun matches(usually in one of those zippered scope coats to adjust fiber optic light intensity), before they were completely supplanted by the 1-4. It has been a long time since I have seen an ACOG at a match like that. Might be more popular at a run-n-gun due to the light weight. |
|
Quoted:
My favorite early 2000s AR product that falls in the category of "what the heck should I do with them now" is the Buffer Technologies Mag Cinch: https://www.AR15.Com/media/mediaFiles/27888/MagCinch-495248.JPG In case you're not familiar with it, and can't tell through the plastic bag, it's a coupling system that holds two AR (or even AK) mags together with two plastic spacers in the middle and nylon straps to secure the magazines. They're actually still listed here at Midway (but discontinued) with a photo to give you a better idea. Here's a small photo showing them on the mags: http://www.mwgco.com/mm5/graphics/00000001/BUFT-MC2.jpg I never actually used them because I was convinced after testing one that I'd never be able to keep the straps tightened enough to be satisfied with them, but I honestly didn't give them much of a chance. I think I actually threw away a set a few months ago because I know that I'll never use them. The old catalog from Buffer Technologies (now out of business) is probably a great collection of these types of early 2000s products. View Quote So after it was cinched up I wrapped it in electrical tape. The problem with coupled mags is that under recoil, the top round in the uninserted magazine will walk forward. It only takes a tiny bit of that walking and you can't insert the other mag until you reseat that round or strip it out. |
|
Still have one.
They are kind of handy in that they can be easily removed from the barrel nut. So if you want an extended free float handguard for an AR pistol that shrouds a silencer that is QD but you need to access the latch, they are workable. They get hot with volume shooting if they shroud a silencer though. Mine didn't come with a wrench, and the wrench that I bought didn't fit the holes very well. I got tired of fucking with goofy and contrived ways to torque on a barrel nut so the last time I swapped it I said fuck the absence of scratches and just used a pipe wrench. It is on a beater AR pistol so... whatever. I won't buy a handguard now that requires a stupid wrench unless it makes sense because of the design like the Mega Monolithic. If the barrel nut doesn't have wrench flats, I'm not buying it. |
|
Quoted:
Man this thread takes me back. I'm still using a Badger Ordnance tactical latch on my rifle that sees the highest round count. I actually like it quite a bit. Enough that I might actually order another tac latch. I had a Trijicon Reflex sight. The model with the big orange triangle. I had both the cantilever mount for mounting it in front of a carry handle and later a GG&G accucam mount for a picatinny rail. 'Drop in' quad rails of various designs. View Quote |
|
|
Quoted: Oh man! This sent me to the parts bin. I have one, still have two mags in it. I never had any trouble cinching the straps down, it has been rock solid since I put it together, but the left over length of straps bugged me. Their manual, if I recall correctly, suggesting cutting off the extra but I didn't want to have trouble putting it on another couple of mags if I ever damaged one. So after it was cinched up I wrapped it in electrical tape. The problem with coupled mags is that under recoil, the top round in the uninserted magazine will walk forward. It only takes a tiny bit of that walking and you can't insert the other mag until you reseat that round or strip it out. View Quote |
|
Quoted:
I still have one of the RRA stocks, but I managed to lose the tube. I have thought about making a new tube since I can't find one for sale anywhere. View Quote One of these might do the trick: https://star15.com/parts-accessories/ace/buffer-tube-for-a2-buttstock-entry Got a good deal on a Sully stock without tube and found these after a little digging. Sully and RRA Entry use the same tube so it should be good to go. |
|
Quoted:
@103 One of these might do the trick: https://star15.com/parts-accessories/ace/buffer-tube-for-a2-buttstock-entry Got a good deal on a Sully stock without tube and found these after a little digging. Sully and RRA Entry use the same tube so it should be good to go. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I still have one of the RRA stocks, but I managed to lose the tube. I have thought about making a new tube since I can't find one for sale anywhere. One of these might do the trick: https://star15.com/parts-accessories/ace/buffer-tube-for-a2-buttstock-entry Got a good deal on a Sully stock without tube and found these after a little digging. Sully and RRA Entry use the same tube so it should be good to go. |
|
SGW/OLY lower from 87' with A1 PG, ambi safety, flat top upper with 16" Hvy bbl OLY 1:9, KAC RIS handguard and VFG, clobbered together SF light mounted with a Weaver ring, GG&G BUIS IIRC, Colt N1 stock w/ two position receiver extension and ACOG TA01NSN. Colt side sling swivel attached to FSB. This picture take Apr 04'
Attached File Attached File My rifle rack above my desk in Balad, Iraq 05-06'. TA01NSN ACOG on my M4A1 with ARMS SIR 50C, 40L BUIS, SF light, TD VFG, HK mag and LMT SOPMOD stock. Attached File Other guns are Colt M16A2, Bulgarian (Circle 10) AKM with SF railed handguard with KAC VFG and M68 Comp2. Iraqi Tabouk DMR semi auto rifle with adjustable rear sight. Rifle mags loaded with Mk262 77 gr OTM. Attached File CD |
|
I've still got one of my early "combat quality" custom builds from about 2007 or so.
Aimpoint Comp M2, picatinny "quad rail", Surefire M900A vert grip/flashlight combo, original Magpul FDE mags and furniture, DD M4 profile barrel: are some of the features from back in the day during the beginning/middle of the GWOT. For those of you not into ARs at the time, or new to ARs around the 2006-2008 time period, that was when a lot of people were mounting every damn part they could to their guns and 8-10 pound ARs were fairly common. Lots of Tapco-fucked shit to be seen then as well, as the Magpul product line was not as prodigious and diverse as it it today. ETA: M4 profile barrels were all the rage. |
|
CDNN still has about a dozen of these old Surefire M25s for $50.00. @Postal0311 posted a review on LooseRounds.com, looks like a nifty bit of history. |
|
Quoted:
Z-M Weapons LR-300 was awesome looking, but seldom encountered. https://www.AR15.Com/media/mediaFiles/13082/501C2948-2791-4960-8220-A51D3CD5FD0E_jpeg-804726.JPG https://www.AR15.Com/media/mediaFiles/13082/FCDD2A0B-55C1-424D-A249-761CE36DDF4D_jpeg-804727.JPG The ones produced after Para bought them out didn't look as cool. View Quote It was actually a nice shooting rifle, surprisingly low felt recoil. Vey cool design worthy of being reintroduced |
|
Quoted:
I discovered this thread today and I am pleased ARMS #50 with the discontinued top rail. https://www.AR15.Com/media/mediaFiles/455660/3DBA81F8-1ADC-4F96-B618-A7DB60608974_jpeg-716074.JPG If any of you guys ever played Metal Gear Solid 4, you might recognize this build that emerged from the first few trailers in the early 2000’s. It should have an old Eotech 552 or a Comp M2 and the muzzle device should be an OTB mount for a suppressor with a Troy Medieval brake at the end, but I’ve changed it around for what I had on hand. It’s an old build, but it always stuck with me. I scrapped my Block II-ish for this and don’t regret it https://www.AR15.Com/media/mediaFiles/455660/CECF7BE9-E184-4EC8-95A6-66BC9EA1238F_jpeg-716103.JPG View Quote |
|
Quoted: I love this mgs4 build so much! View Quote Attached File |
|
Quoted:
Thank you! I ended up scrapping that build to put together a recce, but I was able to get a more correct setup for it :) https://www.AR15.Com/media/mediaFiles/455660/7DA9BB57-76CE-48CC-8320-2C309BEC6F15_jpeg-843569.JPG View Quote |
|
Quoted:
Has anyone mentioned the Kitty Kat yet? https://i.imgur.com/mqFj1WQ.jpg Might start one of these once I finish my SWAT build. View Quote |
|
View Quote |
|
|
|
Quoted:
Damn that looks good @Miami_JBT. I grabbed one of those Surefire M25 kits from CDNN, here’s a WIP pic: https://i.imgur.com/MGCBcTb.jpg Surefire 660 Surefire M25 A.R.M.S. #51 Bushnell Holosight Sully Stock View Quote Those holosights are pretty good! I have one on my Bushmaster M17S |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.