User Panel
What does he charge?
|
|
|
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Just jumped on the mk18 bandwagon MOD 0 upper coming this week. T1 acceptable? Pretty sure I've seen that setup before....
|
|
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Colt the rifles and super sport the motorcycles
|
Originally Posted By aaron580:
Just jumped on the mk18 bandwagon MOD 0 upper coming this week. T1 acceptable? Pretty sure I've seen that setup before.... View Quote T1 will work. Although it would make it technically more of a block 1.5 CQBR, depending on your other accessories of course |
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By MILSPEC556:
Its about time. Prepare to want a block 2 10.3 in no time. T1 will work. Although it would make it technically more of a block 1.5 CQBR, depending on your other accessories of course View Quote |
|
|
Originally Posted By aaron580:
Oh plans are in the making for a 1 as well don't worry, I just decided today was the day for a mod 0 with a fucking brace for a couple months. M3x incan and a T1 with a NT4 will go on this dude for a while. I'll also do the block 3 in no time soon as preorder is up View Quote View All Quotes View All Quotes Originally Posted By aaron580:
Originally Posted By MILSPEC556:
Its about time. Prepare to want a block 2 10.3 in no time. T1 will work. Although it would make it technically more of a block 1.5 CQBR, depending on your other accessories of course Would be nice if the 10.3 URG-I deets were released sometime soon |
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By krdt: Miniguns and cheerleaders? I am pretty sure there is some kind of universal law being broken here. Miniguns, yes... cheerleaders, yes... but miniguns and cheerleaders together? Excessive, sir... excessive :D. And two different URGs running Raptors or is that the same one with different optics? Just wondering how common Raptors actually are on the guns you see. View Quote CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14'&17' |
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14'&17' |
I put this upper together today. I want to stick with the Eotech, but I’m digging the Nightforce too. May just keep both and switch back and forth.
Attached File Attached File |
|
|
Originally Posted By cdholmes:
I put this upper together today. I want to stick with the Eotech, but I'm digging the Nightforce too. May just keep both and switch back and forth. https://www.AR15.Com/media/mediaFiles/414212/C076C5AD-12F6-4C17-8E19-96E81511FD95-441697.JPG https://www.AR15.Com/media/mediaFiles/414212/D36C930A-92B9-49A3-85CF-D0412907D136-441698.JPG View Quote took my fresh built cqbr out today and got damn it shot good. Much better accuracy out of my colt barrel than my dd. Plus the .070 port is nice. The insert I had in my dd shot just as soft but had major gas leak at the block, got the black thumb lol. Ended up up with the 553 on it though, just seems right. Scar can wear the elcan when it gets rebuilt. |
|
|
Originally Posted By Spooled:
Man that is the shiniest peic of gear I have ever seen on one of your guns lol I really wanted to use this well worn 620 on my CQBR but the mount makes the light block my laser. https://i.imgur.com/ZNs7UPH.jpg https://i.imgur.com/fPYsbnk.jpg View Quote |
|
|
Does anyone remember if the LSO grips that Numrich sells had an issue? Seems like I recall them missing the safety spring/detent hole.
|
|
|
Originally Posted By LongTrang: Where did you get that mount? I dig it. I tried looking up the company..but it seems they don't exist anymore.... Vanguard6 yes? View Quote |
|
|
Well, after following this thread for a few days I decided I had to have more mk18 in my life. Ordered the dd mk18 upper. Hopefully it's a normal sized gas port. Is the surefire socom rc2 acceptable? Hope so, because I ordered that too I'll still need a muzzle device but I have a spare colt bcg and ch.
|
|
|
johnbrace at frontier dot com?
|
|
|
Originally Posted By Spooled:
Vanguard 6 group, I also tried researching them with no luck. I bought the light used and this was included so I just roll with it. The iwc mil 620 is a great mount for 620 lights if you want an offset option. View Quote |
|
|
|
Hey, new to this clone game but looking to build one up here in the North. Figured the MK18 would be a good place to start out. Been creeping through the older pages looking at the detailed knowledge you guys have amassed on the gun. Anybody know (Combat Diver probably does) if the MK18 or early CBR's suffered the same issues with burning out barrels as early M4's that lead to the SOCOM Profile? Is the SOCOM profile put into the 10.3"s now as well? If so is there a good place/manufacturer to source 'em from?
|
|
|
Originally Posted By Frost-04:
Hey, new to this clone game but looking to build one up here in the North. Figured the MK18 would be a good place to start out. Been creeping through the older pages looking at the detailed knowledge you guys have amassed on the gun. Anybody know (Combat Diver probably does) if the MK18 or early CBR's suffered the same issues with burning out barrels as early M4's that lead to the SOCOM Profile? Is the SOCOM profile put into the 10.3"s now as well? If so is there a good place/manufacturer to source 'em from? View Quote CD |
|
De Oppresso Liber
Iraq: 91,03,04,05,06,08,09,15&16' Afganistan: 09,10,11',14'&17' |
Apologies, that is what I meant about the barrels, wearing out the heat treat from continuous FA fire. ADCO cut downs are the way to go then? Have to look into having them cut a barrel and then have it imported to me in Canada.
|
|
|
Originally Posted By Bullseye_Doc_Holiday:
This is a Colt SOCOM cut to "10.3" and gas port opened to .070 by ADCO. Runs like a top. The only thing (and ADCO mentions this on their website) is that they cut to nominal lengths. Mine actually measures 10.45" bolt face to muzzle. If you're a stickler, take their advice and mark where you want it cut to. https://i.imgur.com/t9VhAgs.jpg View Quote |
|
|
Originally Posted By Bullseye_Doc_Holiday:
This is a Colt SOCOM cut to "10.3" and gas port opened to .070 by ADCO. Runs like a top. The only thing (and ADCO mentions this on their website) is that they cut to nominal lengths. Mine actually measures 10.45" bolt face to muzzle. If you're a stickler, take their advice and mark where you want it cut to. https://i.imgur.com/t9VhAgs.jpg View Quote Attached File That's the second fucking doucher in like 2 days btw. The fuck? Attached File I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. |
|
Anything worth doing is worth overdoing. Moderation is for pussies.
"Drugs and alcohol are not my problem - reality is my problem. Drugs and alcohol are my solution." - Russel Brand |
Originally Posted By ThRob:
johnbrace at frontier dot com? View Quote View All Quotes View All Quotes Originally Posted By ThRob:
Originally Posted By SecretSquirell:
Originally Posted By ThRob:
Who do you guys recommend for the Colt clone engraving? I use Tactical Machining 80% lowers a good bit and already have a 5D set up, but I've never had anything engraved other than SBR's?? |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Originally Posted By JohnnySasaki20:
Hey guys, here's my clone of my EmmKay18 mod 3 Block 4. There's a few non-clone parts, but it's a WIP. https://www.AR15.Com/media/mediaFiles/260264/AS-GBBR-070-1L-442590.JPG That's the second fucking doucher in like 2 days btw. The fuck? https://www.AR15.Com/media/mediaFiles/260264/AirBrush_20180205184240-442612.JPG I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. View Quote View All Quotes View All Quotes Originally Posted By JohnnySasaki20:
Originally Posted By Bullseye_Doc_Holiday:
This is a Colt SOCOM cut to "10.3" and gas port opened to .070 by ADCO. Runs like a top. The only thing (and ADCO mentions this on their website) is that they cut to nominal lengths. Mine actually measures 10.45" bolt face to muzzle. If you're a stickler, take their advice and mark where you want it cut to. https://i.imgur.com/t9VhAgs.jpg https://www.AR15.Com/media/mediaFiles/260264/AS-GBBR-070-1L-442590.JPG That's the second fucking doucher in like 2 days btw. The fuck? https://www.AR15.Com/media/mediaFiles/260264/AirBrush_20180205184240-442612.JPG I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Anyone have any pics of Intelligence Support Activity guns? I asked in one of the FB groups, but didn't get any responses, and even if I saw a pic online, I wouldn't be able to tell if it was ISA or not. Usually just get pics of 1st SFOD-D and DEVGRU (or are they called TACDEVRON now?).
Anyway, I imagine they'd be using 416's, but I believe it was mentioned a while back that they're kosher in here. |
|
Anything worth doing is worth overdoing. Moderation is for pussies.
"Drugs and alcohol are not my problem - reality is my problem. Drugs and alcohol are my solution." - Russel Brand |
Originally Posted By JohnnySasaki20: Hey guys, here's my clone of my EmmKay18 mod 3 Block 4. There's a few non-clone parts, but it's a WIP. https://www.AR15.Com/media/mediaFiles/260264/AS-GBBR-070-1L-442590.JPG That's the second fucking doucher in like 2 days btw. The fuck? https://www.AR15.Com/media/mediaFiles/260264/AirBrush_20180205184240-442612.JPG I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. View Quote |
|
|
Originally Posted By JohnnySasaki20: Hey guys, here's my clone of my EmmKay18 mod 3 Block 4. There's a few non-clone parts, but it's a WIP. https://www.AR15.Com/media/mediaFiles/260264/AS-GBBR-070-1L-442590.JPG That's the second fucking doucher in like 2 days btw. The fuck? https://www.AR15.Com/media/mediaFiles/260264/AirBrush_20180205184240-442612.JPG I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. View Quote |
|
|
Originally Posted By Bullseye_Doc_Holiday:
OMG, I know, right? Like how dare I try and help answer the dude’s question and show an image to back it up. Sorry for raining on your clone perfect parade homie. View Quote View All Quotes View All Quotes Originally Posted By Bullseye_Doc_Holiday:
Originally Posted By JohnnySasaki20: Hey guys, here's my clone of my EmmKay18 mod 3 Block 4. There's a few non-clone parts, but it's a WIP. https://www.AR15.Com/media/mediaFiles/260264/AS-GBBR-070-1L-442590.JPG That's the second fucking doucher in like 2 days btw. The fuck? https://www.AR15.Com/media/mediaFiles/260264/AirBrush_20180205184240-442612.JPG I airbrushed the break out of the mod 0 because it's embarrassing as fuck, lol. |
|
|
Originally Posted By Bullseye_Doc_Holiday:
OMG, I know, right? Like how dare I try and help answer the dude’s question and show an image to back it up. Sorry for raining on your clone perfect parade homie. View Quote |
|
Anything worth doing is worth overdoing. Moderation is for pussies.
"Drugs and alcohol are not my problem - reality is my problem. Drugs and alcohol are my solution." - Russel Brand |
Originally Posted By krdt:
Did a little shooting and exploring for a new jackrabbit hunting spot yesterday. Hoped to maybe luck into a coyote as well, but all I saw was a grand total of two jackrabbits in really thick cover and didn't even get off a shot, heh. I went :\ and did a little shooting instead. Stay out! Well, you can come in; just close the gate afterwards :). http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-01.jpg Some scenery from the road: http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-03.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-05.jpg Of course, you knew the CQBR would make an appearance :D. Rockin' a padded VCAS instead of UDC single point for a change. http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-01.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-04.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-03.jpg View Quote session lol. Anyways to keep it on topic, I’m trying to decide if I want to throw my A.R.M.S # 17 mount on my M600C.....I love how light this damn thing is with the stock mount, but just not sure on the thumbscrew mount and if it’ll stay secured. I do also have that offset Gear Sector mount Stevie sent me but since I’ll be using a tape switch I’m not sure there would be too much benefit to offset for me.....decisions decisions lol |
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By tnbigdawg:
Damn look what yall made me do! I've been lurking around and finally got through all 9 hundred something odd pages and I think several title changes later I spent waayyyyy too many drunken nights browsing here and on the EE and this is what I ended up with....so far DDMK18 Specs: Finally got the stamp in last month. Came with the ass gaping port barrel ; contacted DD about replacing it while it's brand new and got denied. I guess this barrel is gonna be for sale soon on the EE. I sourced a couple of the "contract overruns" DD 10.3" barrel with 0.070" port. This was way before DD started changing the port size back down to proper specs. Had a SF4P but sold it and installed a SF3P. Oh well. Also have a SFCT standing by. I'm swapping the receiver for one with a toned down DD logo when it gets here. I ditched the DD factory furniture and installed a B5 Sopmod, modified A2 grip, standard trigger guard, and TD stubby. Geissele trigger (forgot which one) Ambi safety Gas Buster CH KAC sights Eotech EXPS3-0 Surefire M300c Surefire RC2 suppressor in black (the only thing my dealer had on hand). I sprayed it tan and gold/bronze to try and match the factory colors. I know it's gonna burn off but oh well. I used the tan Warden for reference, and by the way, just for kicks I found out the locking collars are interchangeable (dimensional wise). The Warden collar has a shallow circle milled next to the push button, that's the only cosmetic difference I can tell. Don't worry I swapped it back M4A1 80% CQBR Block II Specs (Work In Progress): US .gov M4A1 engraved 80%, though I went with my own unique SN for personalization, and also my Trust. Gotta get a new jig (sold my 5D jig) and wait for some good weather to mill this out. Need to find a place that will anodize it, and if all goes well send in my F1 papers. Might run it as a pistol until approved or just test the upper on the DDMK18 lower. Colt BCG Colt Receiver Colt barrel, chopped by ADCO. Shaved factory pinned FSB. Contemplating if I should get a DD gas block for correctness sake! DD MK18 RIS FDE. I went through a couple of these but saved this older style one because of the brighter anodizing it had. SF4P ATPIAL-C WMX200. Waiting for my dual pressure switch to come in. I plan to throw on another B5 Sopmod, TD QD stubby, another EXPS3-0, Geissele SSA-E Need to source a set of CQD mounts. All my other rifles run QD swivels. Also needs a Colt Ambi safety or similar. Gonna pull the trigger and get the proper tan Surefire RC suppressor once I figure out the whole process of ordering it online and having it sent to my dealer. Once it's done I'll be sure to dress it nicely with some crappy looking paint . I cannot wait for this day to come, but it's gonna be a long while! I don't care if "Block III" specs comes out; I'm determined to finish this project and hang onto it. https://i.imgur.com/go25u42.jpg View Quote If you read all 900 pages and didn’t run for the hills, I’m pretty sure you’re one of us. As you know, we have some serious mental issues. Welcome to the club. |
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By MILSPEC556:
Looks like you had a less stressful day than I did. Wife’s water broke last night and I’ve been stuck in the hospital (emergency C section) baby seems to be doing ok Except some under developed lung issues due to being premature. Wife was in excruciating pain during C, good lord could I go for a range session lol. Anyways to keep it on topic, I’m trying to decide if I want to throw my A.R.M.S # 17 mount on my M600C.....I love how light this damn thing is with the stock mount, but just not sure on the thumbscrew mount and if it’ll stay secured. I do also have that offset Gear Sector mount Stevie sent me but since I’ll be using a tape switch I’m not sure there would be too much benefit to offset for me.....decisions decisions lol View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By krdt:
Did a little shooting and exploring for a new jackrabbit hunting spot yesterday. Hoped to maybe luck into a coyote as well, but all I saw was a grand total of two jackrabbits in really thick cover and didn't even get off a shot, heh. I went :\ and did a little shooting instead. Stay out! Well, you can come in; just close the gate afterwards :). http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-01.jpg Some scenery from the road: http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-03.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-05.jpg Of course, you knew the CQBR would make an appearance :D. Rockin' a padded VCAS instead of UDC single point for a change. http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-01.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-04.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-03.jpg session lol. Anyways to keep it on topic, I’m trying to decide if I want to throw my A.R.M.S # 17 mount on my M600C.....I love how light this damn thing is with the stock mount, but just not sure on the thumbscrew mount and if it’ll stay secured. I do also have that offset Gear Sector mount Stevie sent me but since I’ll be using a tape switch I’m not sure there would be too much benefit to offset for me.....decisions decisions lol I wouldn't put the bigass ARMS on it. I'm running a pressure switch and still going to go with a GS offset just because it tucks it in a little more. Not something needed by any means, but not a bad thing, either. The GS is definitely more robust/secure than the stock mount, but they both need a little Loctite - the SF stock mount especially. Those stock mounts are super bad about vibrating loose. I didn't bother to Loctite mine for the time being while waiting on the GS mount and it usually needs tightening every a few hundred rounds. I'd go with either the stock or GS - whichever you think looks better - and give a good dose of blue Loctite. Congrats again! |
|
Practice, the master of all things. - Augustus
|
Originally Posted By krdt:
Well, holy hell... sounds like you had quite a day. Glad to hear everything turned out well and that baby and wife are doing alright. Congratulations on the little Milspec clonelet! I wouldn't put the bigass ARMS on it. I'm running a pressure switch and still going to go with a GS offset just because it tucks it in a little more. Not something needed by any means, but not a bad thing, either. The GS is definitely more robust/secure than the stock mount, but they both need a little Loctite - the SF stock mount especially. Those stock mounts are super bad about vibrating loose. I didn't bother to Loctite mine for the time being while waiting on the GS mount and it usually needs tightening every a few hundred rounds. I'd go with either the stock or GS - whichever you think looks better - and give a good dose of blue Loctite. Congrats again! View Quote View All Quotes View All Quotes Originally Posted By krdt:
Originally Posted By MILSPEC556:
Originally Posted By krdt:
Did a little shooting and exploring for a new jackrabbit hunting spot yesterday. Hoped to maybe luck into a coyote as well, but all I saw was a grand total of two jackrabbits in really thick cover and didn't even get off a shot, heh. I went :\ and did a little shooting instead. Stay out! Well, you can come in; just close the gate afterwards :). http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-01.jpg Some scenery from the road: http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-03.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-05.jpg Of course, you knew the CQBR would make an appearance :D. Rockin' a padded VCAS instead of UDC single point for a change. http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-01.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-04.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-03.jpg session lol. Anyways to keep it on topic, I’m trying to decide if I want to throw my A.R.M.S # 17 mount on my M600C.....I love how light this damn thing is with the stock mount, but just not sure on the thumbscrew mount and if it’ll stay secured. I do also have that offset Gear Sector mount Stevie sent me but since I’ll be using a tape switch I’m not sure there would be too much benefit to offset for me.....decisions decisions lol I wouldn't put the bigass ARMS on it. I'm running a pressure switch and still going to go with a GS offset just because it tucks it in a little more. Not something needed by any means, but not a bad thing, either. The GS is definitely more robust/secure than the stock mount, but they both need a little Loctite - the SF stock mount especially. Those stock mounts are super bad about vibrating loose. I didn't bother to Loctite mine for the time being while waiting on the GS mount and it usually needs tightening every a few hundred rounds. I'd go with either the stock or GS - whichever you think looks better - and give a good dose of blue Loctite. Congrats again! Thanks for the congrats brother! I just went in and saw her, pulse is perfect, amount of O2 the CPAP is giving her is perfect, but her breaths are super sporadic and blood sugar is low. So I’ll know more tomorrow. Anyways I guess I know who owns my second CQBR now, and it ain’t me Thanks again brother |
|
Colt the rifles and super sport the motorcycles
|
Originally Posted By MILSPEC556:
I probably will end up putting the G.S. back on eventually then. He already had the G.S. Installed when I got it but stupid me had to loctite the stock mount on (just the mount to light attachment screws, didn’t loctite the thumb nut) but I did torque down the thumb but a bit with the top arm of a set of fingernail clippers. Just not sure I could bring myself to trust it without running a dummy cord like the old days tho, he’ll maybe I’ll do that for the time being. Thanks for the congrats brother! I just went in and saw her, pulse is perfect, amount of O2 the CPAP is giving her is perfect, but her breaths are super sporadic and blood sugar is low. So I’ll know more tomorrow. Anyways I guess I know who owns my second CQBR now, and it ain’t me Thanks again brother View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By krdt:
Originally Posted By MILSPEC556:
Originally Posted By krdt:
Did a little shooting and exploring for a new jackrabbit hunting spot yesterday. Hoped to maybe luck into a coyote as well, but all I saw was a grand total of two jackrabbits in really thick cover and didn't even get off a shot, heh. I went :\ and did a little shooting instead. Stay out! Well, you can come in; just close the gate afterwards :). http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-01.jpg Some scenery from the road: http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-02.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-03.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-Stuff-05.jpg Of course, you knew the CQBR would make an appearance :D. Rockin' a padded VCAS instead of UDC single point for a change. http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-01.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-04.jpg http://wkd.site.nfoservers.com/CQBR/CQBR.Jack.Bell-03.jpg session lol. Anyways to keep it on topic, I’m trying to decide if I want to throw my A.R.M.S # 17 mount on my M600C.....I love how light this damn thing is with the stock mount, but just not sure on the thumbscrew mount and if it’ll stay secured. I do also have that offset Gear Sector mount Stevie sent me but since I’ll be using a tape switch I’m not sure there would be too much benefit to offset for me.....decisions decisions lol I wouldn't put the bigass ARMS on it. I'm running a pressure switch and still going to go with a GS offset just because it tucks it in a little more. Not something needed by any means, but not a bad thing, either. The GS is definitely more robust/secure than the stock mount, but they both need a little Loctite - the SF stock mount especially. Those stock mounts are super bad about vibrating loose. I didn't bother to Loctite mine for the time being while waiting on the GS mount and it usually needs tightening every a few hundred rounds. I'd go with either the stock or GS - whichever you think looks better - and give a good dose of blue Loctite. Congrats again! Thanks for the congrats brother! I just went in and saw her, pulse is perfect, amount of O2 the CPAP is giving her is perfect, but her breaths are super sporadic and blood sugar is low. So I’ll know more tomorrow. Anyways I guess I know who owns my second CQBR now, and it ain’t me Thanks again brother I'd probably go with the GS myself - just feels like a more solid mount not even counting the offset making for a slightly more streamlined setup. But, I've also used the stock mount with Loctite on the thumbscrew without issue. Speaking of Scout mounts, I never did hear back from the site I originally ordered that regular FDE GS from - it's been more than a week since they were supposed to get back to me :\. So, I went ahead and ordered a slim GS mount in FDE from Brownells :D. And *drumroll*... it's backordered, too - lol. Be that as it may, I'm a lot more confident I'll actually get the fucking thing eventually from Brownells, heh. Besides, if I'm gonna be waiting, I'd rather wait on a fancy slim GS. |
|
Practice, the master of all things. - Augustus
|
|
|
|
Brownell's can be kinda hit or miss with their back orders. I put my colt m4 carbine lower on back order prepared for a month or so wait, then I get a call from my ffl 5 days later and it's already there. Then I missed out the last time they had Wilcox mounts in, and those are still back-ordered. Hopefully the gs mount isn't as bad as the Wilcox back order. Those things should just be on indefinite back order with how quick they usually go. Found some in stock at tnvc but without all the discounts brownell's has available plus tnvc' some shipping, I think it was like $25 bucks more than I wanted to pay. If I can find some discounts at tnvc I may go ahead and do it.
|
|
|
Originally Posted By Dyzastr:
Laid out all my accessories for the cqbr block 1/mk18 and m4. Got tired swappin accessories around so I got 2 of everything. Got a few things comin to finish the m4. Also got the start of a cqbr block 2 in the works. Curious if anyone has any pics of the larue lt15-9 on a cqbr? I know there are some in the thread but 900+ pages is a lot to skim through. Also curious what anyone thinks of the peq-5? I found one for sale and since it has a visible laser I would actually use it. Not lookin to get into night vision anytime soon due to $. http://i.imgur.com/1CruRbQ.jpg View Quote |
|
|
Originally Posted By JohnMH92:
Probably a dumb question, what BUIS is that on your 10.3”? View Quote View All Quotes View All Quotes Originally Posted By JohnMH92:
Originally Posted By Dyzastr:
Laid out all my accessories for the cqbr block 1/mk18 and m4. Got tired swappin accessories around so I got 2 of everything. Got a few things comin to finish the m4. Also got the start of a cqbr block 2 in the works. Curious if anyone has any pics of the larue lt15-9 on a cqbr? I know there are some in the thread but 900+ pages is a lot to skim through. Also curious what anyone thinks of the peq-5? I found one for sale and since it has a visible laser I would actually use it. Not lookin to get into night vision anytime soon due to $. http://i.imgur.com/1CruRbQ.jpg |
|
Squire
Without blood, it doesn't count! I survived ARFbortion2016 and all I got was this stupid sigline |
Yup. Lmt L8A I believe. It's an a2 style sight similar to using a chopped carry handle. Mod 0 clone correct etc...
|
|
|
Originally Posted By prodigy808: Ok awesome. Thank you. I've read that the newer m300c 500lumen light has a new release body supposedly and the UE tailcap is not compatible which sucks because I got mine with only the clicky tailcap that comes with it. Thanks again View Quote |
|
|
Originally Posted By USMC1986:
Incorrect. I got my UE07 in FDE/TAN whatever last night and it fits and works perfectly. View Quote View All Quotes View All Quotes Originally Posted By USMC1986:
Originally Posted By prodigy808: Ok awesome. Thank you. I've read that the newer m300c 500lumen light has a new release body supposedly and the UE tailcap is not compatible which sucks because I got mine with only the clicky tailcap that comes with it. Thanks again |
|
|
Originally Posted By Dyzastr:
Brownell's can be kinda hit or miss with their back orders. I put my colt m4 carbine lower on back order prepared for a month or so wait, then I get a call from my ffl 5 days later and it's already there. Then I missed out the last time they had Wilcox mounts in, and those are still back-ordered. Hopefully the gs mount isn't as bad as the Wilcox back order. Those things should just be on indefinite back order with how quick they usually go. Found some in stock at tnvc but without all the discounts brownell's has available plus tnvc' some shipping, I think it was like $25 bucks more than I wanted to pay. If I can find some discounts at tnvc I may go ahead and do it. View Quote The Wilcox mounts actually used to be in stock fairly regularly - I think I saw them available in the spring/summer of 2017 pretty often. I should've picked one up when I had the chance. Unfortunately, I stuck a Larue LT150 on my Mod 0, because, like many decisions I made on the Mod 0 build, I didn't think being 100% correct was that big of deal at the time. Oh, how times change :\. The shame... THE SHAME! |
|
Practice, the master of all things. - Augustus
|
Originally Posted By pezboytate:
I believe all new Scout bodies and tail caps have a different thread spec than the old one. IIRC, new bodies can only use new tail caps but old bodies can use old or new tail caps. View Quote View All Quotes View All Quotes Originally Posted By pezboytate:
Originally Posted By USMC1986:
Originally Posted By prodigy808: Ok awesome. Thank you. I've read that the newer m300c 500lumen light has a new release body supposedly and the UE tailcap is not compatible which sucks because I got mine with only the clicky tailcap that comes with it. Thanks again ETA: Just FYI, I did confirm that an old M300C clicky cap will fit and function on the new M300C. ETA AGAIN: On the other hand, the new M600DF very likely won't work with older M600 accessories because of the need to accommodate 18650s. I'm relatively certain they would have to increase the OD/ID to make 18650s work. The standard Scout body would be quite thin if you bored it large enough for 18650s. That might be the source of the confusion/rumors about the size/thread change and accessories no longer working. |
|
Practice, the master of all things. - Augustus
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.