Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
6/9/2004 8:02:36 AM EDT
Yesterday, while surfing here, my computer got the dreaded blue screen.  It was only displayed for a split second, then the computer rebooted.

Ever since then, I have been unable to access anything through the network card...local computers, router, internet...nothing works.

I've tried making a new network connection.  I go through all the steps and I'm told that one was created, but it never shows up in Network Connections.

Any ideas what the problem could be?

Comp is a Win2k, AMD 1600, 1.5GB RAM.

Everything else works.  Just not the networking.
6/9/2004 8:08:34 AM EDT
[#1]
havbe you gone to your control panel and checked the status of the network card?

I am guessing the card went bad while your computer was on.  This will cause it to crash.

SGatr15
6/9/2004 8:10:11 AM EDT
[#2]
Card says it's working properly.

I'm thinking that some important network driver got axed in the crash.  I just have no idea what it may have been.
6/9/2004 8:17:48 AM EDT
[#3]
Go to device manager first and make sure ever device has a driver (No yellow marks).

Check the event viewer for the date and time around the incident.
Look for clues there.

If you still don't have a lead, look at the physical aspect of your network.
Is the hub/switch working correctly?
At this point I'd go buy a new network card and try that or you can dily fart around with the one you have.
6/9/2004 8:22:42 AM EDT
[#4]
Sounds like the NIC card or it's driver.

Go to add remove software, and remove Microsoft's TCP/IP protocol stack. Go to the system panel and remove the NIC card. Reboot and re-install the hardware drivers and software protocol stack when prompted.

$3-$5 will buy you a new 100 Mb NIC card.
6/9/2004 8:27:27 AM EDT
[#5]

Quoted:

Go to add remove software, and remove Microsoft's TCP/IP protocol stack. Go to the system panel and remove the NIC card. Reboot and re-install the hardware drivers and software protocol stack when prompted.





I haven't had to do this since Windows 9x.
I assumed he's running 2000/XP due to the memory dump he speaks of.
6/9/2004 10:21:28 AM EDT
[#6]
None of these ideas have worked.

I put in a new card that I've had a while.  It won't accept the drivers, tho :(

I've tried 3 different versions of the drivers, but each time I point the computer to their location, it says they aren't suitable.

I've also tried the new card in 2 different PCI slots.


The only thing in the Device Manager that is now highlighted is the new card.  Old card is still there and "working properly".

This is frustrating.
6/9/2004 10:34:41 AM EDT
[#7]
Sounds like your still working on the first issue.

You need to get a new NIC working.
If you get the card you had sitting around it's time to spent $10 and get a new one.
If the drivers that come with it don't work, you there should be no reason updated ones of their website shouldn't.