User Panel
Posted: 3/20/2019 11:11:35 PM EDT
The Noblex Glock Sight. Fits the MOS cutout with no adapter plate.
While this isn’t full integrated into the slide, it’s as far as I’d want to go. Any more and you’re going to have to take the entire slide out of commission to fix things if the dot goes down. More Info Here |
|
It's a cool concept I just wonder if you actually gain anything over the setups we see now.
|
|
I don't get it. It looks like the main benefits of a RDS are limited in that small of a viewing window.
|
|
|
|
I'll be honest. I want to see a pop-up RMR-type sight that flips up when you draw, or can be pushed down to use iron sights.
Im certain that it has no advantages, but I has been drinking. |
|
|
That is cool, but IMHO they should have made it smooth enough to not snag on things even if it made it larger.
|
|
The real future is bore sighted pistols slaved to Bluetooth enabled contact lenses.
|
|
Quoted:
A true cowitness would be huge for the learning curve. View Quote View All Quotes View All Quotes |
|
|
Quoted:
A true cowitness would be huge for the learning curve. View Quote View All Quotes View All Quotes |
|
Quoted:
Yep, something I've noticed with the Shield RMS, it's much easier to pick up the dot than with an RMR even though the glass is significantly smaller. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
It's a cool concept I just wonder if you actually gain anything over the setups we see now. |
|
Still have 2 early Docter optic red dots (13 years) and still running strong
|
|
How does the end-user sight it in? I see no elevation or windage adjustment controls.
|
|
|
|
|
Hmmm. Made by Docter so its gotta be decent quality at least.
|
|
|
|
|
Quoted:
I assume the two indented round areas are the adjustment "knobs" View Quote View All Quotes View All Quotes |
|
Quoted:
A true cowitness would be huge for the learning curve. View Quote Quoted:
Yep, something I've noticed with the Shield RMS, it's much easier to pick up the dot than with an RMR even though the glass is significantly smaller. View Quote Quoted:
The video says no adjustment. Mount and hope for the best. View Quote |
|
The entire optic needs to be level with the top of the slide.
The future is projection without a glass lens to get damaged. |
|
|
|
|
Window seems a bit too small. The RMR window is small, but still workable...I don't know how well that one will be.
Quoted:
Is there any purpose to the wings on the sides? View Quote |
|
|
Are RMRs really that much better than irons?
How about while carrying? Does it effect that? |
|
I really don't see what's so wrong with the current crop of slide-mounted dots that this supposedly solves. They're really not that bulky, they don't add size to the dimensions of the pistol that are difficult to conceal, and I wouldn't want a window much smaller than an RMR anyway. It's innovative, certainly, and will be interesting to see how it develops. I suppose I'm just skeptical for now.
What I'd really like to see is more development of frame-mounted, non-reciprocating optics on duty/carry pistols. That's the next step |
|
|
Is it me or is the most important picture not loading or borked at that link?
Not a single sight picture? And IN before someone beats this on a fence post! |
|
Looks pretty interesting. Searching around I also see they have a shotgun sight (“5.0 VR”) that appears similar in construction. They say it has a steel body.
https://www.optics-trade.eu/us/docter-quicksight-5-0-vr.html Here’s a vid on the “5.0 VR” Docter QUICKsight 5.0 VR Red Dot Sight review ETA: I found a “through the sight” pic here: https://www.av-ase.fi/ase/tuote/noblex-glock-mos-50-moa-punapiste/4022203557804/ No idea what that site says, but here’s the pic Attached File No dot visible though. Anywhoo, looking through that window, it might not be that bad of a tradeoff in size since the horizontal plane of the slide will help keep you honest in your presentation. |
|
|
Quoted:
The video says no adjustment. Mount and hope for the best. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
How does the end-user sight it in? I see no elevation or windage adjustment controls. ETA it is adjustable |
|
Quoted:
Are RMRs really that much better than irons? How about while carrying? Does it effect that? View Quote As for carrying, I was able to put my buddy's CZ P-10c with RMR into my Safariland Glock holster no problem. |
|
Quoted: As for acquiring targets, I'm still on the fence as to whether that's quicker with a dot than with irons. So far I've only played around with RMS sights on friends' pistols, but I have a hard time getting the presentation to be automatic. Of course, it would improve with practice. View Quote |
|
Quoted:
You can cowitness now with tall sights on current setups. I know it's a bit higher but I'm not convinced that matters much after talking to and shooting with a bunch of USPSA open shooters. View Quote |
|
Quoted:
Once you're dialed in it probably doesn't really matter. But in my experience a lower sight window does reduce the learning curve a bit. View Quote View All Quotes View All Quotes Quoted:
Quoted:
You can cowitness now with tall sights on current setups. I know it's a bit higher but I'm not convinced that matters much after talking to and shooting with a bunch of USPSA open shooters. |
|
|
Even if it's not perfect i'm pretty happy to see development going on for handgun applications.
|
|
Quoted:
Even if it's not perfect i'm pretty happy to see development going on for handgun applications. View Quote |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.