User Panel
Originally Posted By hatexoc:
Originally Posted By silhouette_:
Originally Posted By rippleadder:
Originally Posted By Tmender03:
Originally Posted By rippleadder:
Well the parts are flooding in slowly.
next up is the flash hider I can't decided between surefire,DD, or A2X but I want the barrel sent to ADCO asap. Go with Knights NT4. Any specific reason other than authenticity and using the NT4 can? I have a b5 sopmod stock in black I'll sell you =] ETA pic thread http://i1053.photobucket.com/albums/s473/paytonpTX/7298E0C4-D652-449A-81DF-CB49E391862C-5591-000004DA809EE46E.jpg You need a tan 952v. I know :(. I'm actually getting either a 620 or a WMX200 by I have only seen the wmx fielded on mk18s. |
|
Native Texan
LaRuemimati There is no such thing as an unethical round against feral hogs. -BushmanLA |
Originally Posted By ragincajun1919:
http://img.photobucket.com/albums/v217/punkrockpoet/89BA3AD8-2C4A-417B-AC05-F6A243B3C26F-15949-0000100CA6C4F8D4.jpg Added redi mag to my Block II FSP. Moving it backwards to more a PR rifle. The T1 is going to be replaced with an ECOS-N (Comp M2 in Wilcox mount). The only block II items with my the M6X and the RISII. Why? ....why not. I hate you. I was going to move mine to my block II since I'm selling my PR. Looks good though |
|
Native Texan
LaRuemimati There is no such thing as an unethical round against feral hogs. -BushmanLA |
Originally Posted By silhouette_:
Originally Posted By ragincajun1919:
http://img.photobucket.com/albums/v217/punkrockpoet/89BA3AD8-2C4A-417B-AC05-F6A243B3C26F-15949-0000100CA6C4F8D4.jpg Added redi mag to my Block II FSP. Moving it backwards to more a PR rifle. The T1 is going to be replaced with an ECOS-N (Comp M2 in Wilcox mount). The only block II items with my the M6X and the RISII. Why? ....why not. I hate you. I was going to move mine to my block II since I'm selling my PR. Looks good though Why hate me? I'm just trying out new stuff. |
|
|
Originally Posted By silhouette_:
Originally Posted By hatexoc:
Originally Posted By silhouette_:
Originally Posted By rippleadder:
Originally Posted By Tmender03:
Originally Posted By rippleadder:
Well the parts are flooding in slowly.
next up is the flash hider I can't decided between surefire,DD, or A2X but I want the barrel sent to ADCO asap. Go with Knights NT4. Any specific reason other than authenticity and using the NT4 can? I have a b5 sopmod stock in black I'll sell you =] ETA pic thread http://i1053.photobucket.com/albums/s473/paytonpTX/7298E0C4-D652-449A-81DF-CB49E391862C-5591-000004DA809EE46E.jpg You need a tan 952v. I know :(. I'm actually getting either a 620 or a WMX200 by I have only seen the wmx fielded on mk18s. I really want to find a 620v in tan and put it in an offset Haley mount. The M952V disrupts how I want to hold the rifle. I don't use the clicky function of it either, so I would like the slimmer, tape-switch only cap. |
|
|
Will
That is the same reason why I want a 620. I don't have NV nor will I I'm the foreseeable future so I wouldn't need the IR. I canget the 620 and the WMX200 both through work for a great price I just can't figure out which one. The 620 is slimmer than the wmx which I like a lot. Ragin I don't really hate you.. |
|
Native Texan
LaRuemimati There is no such thing as an unethical round against feral hogs. -BushmanLA |
Originally Posted By silhouette_:
Will That is the same reason why I want a 620. I don't have NV nor will I I'm the foreseeable future so I wouldn't need the IR. I canget the 620 and the WMX200 both through work for a great price I just can't figure out which one. The 620 is slimmer than the wmx which I like a lot. Ragin I don't really hate you.. There is also a 600V that isn't listed on the website. It has the same mount points as the M600. I opted for this one because it shoves the light a little forward. |
|
Run with scissors!!!!
|
Originally Posted By coctailer:
Originally Posted By silhouette_:
Will That is the same reason why I want a 620. I don't have NV nor will I I'm the foreseeable future so I wouldn't need the IR. I canget the 620 and the WMX200 both through work for a great price I just can't figure out which one. The 620 is slimmer than the wmx which I like a lot. Ragin I don't really hate you.. There is also a 600V that isn't listed on the website. It has the same mount points as the M600. I opted for this one because it shoves the light a little forward. There are some pics around either this thread or the Mk 18 thread of a Marine's rifle that is really well laid out; he's got a 620V in an offset/forward mount of some type and it just looks slicker than heck. Really clean and tucked in close. I want to do the same thing. When I first got my 952V I was fine with the size of it but these days, as I've gotten better at shooting and refined my grip and stance, I feel like its always interfering with where I want my hand to be. |
|
|
I've gotten away from long bodied lights... they get too much in the way of my grip and I prefer pistol lights on my rifles now. Funny that I used to prefer pistol lights before but I decided I wanted to try other things such as the scout light. Expensive mistakes.
|
|
|
Does anyone have that pic of the SOF guy sitting against a wall with his rifle( I think a CQBR but was posted here) leaning against the wall with a trijicon and a t1 in an offset mount?
|
|
Native Texan
LaRuemimati There is no such thing as an unethical round against feral hogs. -BushmanLA |
Originally Posted By Blanco_Diablo:
Originally Posted By silhouette_:
Does anyone have that pic of the SOF guy sitting against a wall with his rifle( I think a CQBR but was posted here) leaning against the wall with a trijicon and a t1 in an offset mount? Here ya go! http://i156.photobucket.com/albums/t15/BlancoDiablo/525899_540074262676181_519615843_n.jpg Update on my Block II: Just ordered an FDE Daniel Defense M4A1 rail, FDE TangoDown battlegrip, VLTOR VC1 flashider, and a BCM gunfighter charging handle. As soon as I get that package from Rainier, my Block II will be complete Sounds good, make sure to get some pics up. What optic did you go with? |
|
|
Originally Posted By Will816:
Originally Posted By Blanco_Diablo:
Originally Posted By silhouette_:
Does anyone have that pic of the SOF guy sitting against a wall with his rifle( I think a CQBR but was posted here) leaning against the wall with a trijicon and a t1 in an offset mount? Here ya go! http://i156.photobucket.com/albums/t15/BlancoDiablo/525899_540074262676181_519615843_n.jpg Update on my Block II: Just ordered an FDE Daniel Defense M4A1 rail, FDE TangoDown battlegrip, VLTOR VC1 flashider, and a BCM gunfighter charging handle. As soon as I get that package from Rainier, my Block II will be complete Sounds good, make sure to get some pics up. What optic did you go with? Will do! I have a TA31F that I'll be putting on it. May eventually get a tan EOTech EXPS3-0. |
|
|
Originally Posted By Blanco_Diablo:
Originally Posted By silhouette_:
Does anyone have that pic of the SOF guy sitting against a wall with his rifle( I think a CQBR but was posted here) leaning against the wall with a trijicon and a t1 in an offset mount? Here ya go! http://i156.photobucket.com/albums/t15/BlancoDiablo/525899_540074262676181_519615843_n.jpg Update on my Block II: Just ordered an FDE Daniel Defense M4A1 rail, FDE TangoDown battlegrip, VLTOR VC1 flashider, and a BCM gunfighter charging handle. As soon as I get that package from Rainier, my Block II will be complete Awesome thanks man. I think since I'm doing away with my PR I'm going to so this setup with a block II. Since I like using my TA01 for hunting. Can't decide between a KAC mount or Larue. The 45 degree is the same price as the larue bu the standard kac is only 40 bucks or so. |
|
Native Texan
LaRuemimati There is no such thing as an unethical round against feral hogs. -BushmanLA |
Originally Posted By thesocialistnetwork: After much debate I've decided the B5 FDE sopmod is going to get rit dyed to a darker shade of tan. Can't stand the seasick green hue of B5's FDE and the LMT is just too dark. Maybe it's an OCD thing but I'll probably dye the ladder rail covers as well so that it matches closer in color. Will post results once it's all done and hopefully it doesn't turn out like shit. Spray. Paint. |
|
|
Originally Posted By RTUtah:
Originally Posted By thesocialistnetwork:
After much debate I've decided the B5 FDE sopmod is going to get rit dyed to a darker shade of tan. Can't stand the seasick green hue of B5's FDE and the LMT is just too dark. Maybe it's an OCD thing but I'll probably dye the ladder rail covers as well so that it matches closer in color. Will post results once it's all done and hopefully it doesn't turn out like shit. Spray. Paint. Easily the best solution. Paint makes all Colors Match |
|
|
This may be a dumb question, but how do you make sure all the cracks and crevices are properly painted too? I only considered rit dye because I know the application will be even and it will help with the hard to reach areas. I also like how the dye won't rub or wash off and comes out with a factory looking finish. Although wear marks and chipped paint from use does look cool.
|
|
|
Originally Posted By thesocialistnetwork:
This may be a dumb question, but how do you make sure all the cracks and crevices are properly painted too? I only considered rit dye because I know the application will be even and it will help with the hard to reach areas. I also like how the dye won't rub or wash off and comes out with a factory looking finish. Although wear marks and chipped paint from use does look cool. Just spray it lightly at all angles, always in a sweeping motion. The paint will be propelled into and through the cracks and crevices and fill them in. ETA: Find something you don't care about that has complex shapes and crevices and make some practice runs on it, see how it works. I've been spray painting and airbrushing forever, it's pretty easy. |
|
|
Originally Posted By thesocialistnetwork: This may be a dumb question, but how do you make sure all the cracks and crevices are properly painted too? I only considered rit dye because I know the application will be even and it will help with the hard to reach areas. I also like how the dye won't rub or wash off and comes out with a factory looking finish. Although wear marks and chipped paint from use does look cool. You're over-thinking it. A good paint-job isn't too planned out in my opinion, and the BEST paint-jobs are those that are wearing thin on the edges. I wouldn't want a permanent spray because I dig how it looks when it begins to wear away. And it allows you to paint according to the environment. Don't over-think, just paint. |
|
|
Originally Posted By RTUtah: Originally Posted By thesocialistnetwork: This may be a dumb question, but how do you make sure all the cracks and crevices are properly painted too? I only considered rit dye because I know the application will be even and it will help with the hard to reach areas. I also like how the dye won't rub or wash off and comes out with a factory looking finish. Although wear marks and chipped paint from use does look cool. You're over-thinking it. A good paint-job isn't too planned out in my opinion, and the BEST paint-jobs are those that are wearing thin on the edges. I wouldn't want a permanent spray because I dig how it looks when it begins to wear away. And it allows you to paint according to the environment. Don't over-think, just paint. I do think rifles look cool with worn paint. Just like I think road worn guitars look badass - gives them character. |
|
"People don't like the looks of the AK - it's an ugly gun. You can't picture John Wayne carrying an AK. Would he? Probably. He was a practical man."
|
|
Originally Posted By StevieJ309:
I kind of want to build my version of a Block III using the Sand colored Geissele rail as a base. It probably won't happen, though. Is this what you had in mind? http://i1026.photobucket.com/albums/y322/_MacGyver-/23-1.jpg |
|
|
Originally Posted By JShepard:
Originally Posted By StevieJ309:
I kind of want to build my version of a Block III using the Sand colored Geissele rail as a base. It probably won't happen, though. Is this what you had in mind? http://i1026.photobucket.com/albums/y322/_MacGyver-/23-1.jpg Bottom one looks great! Lets not clutter this thread with non-Block II clones Any Block III is only hypothetical and not likely to be developed anytime soon given the current state of the conflict and the diminishing budget for these types of projects. |
|
|
Originally Posted By Will816:
Any Block III is only hypothetical and not likely to be developed anytime soon given the current state of the conflict and the diminishing budget for these types of projects. Thanks captain obvious. |
|
|
|
|
Originally Posted By JShepard:
Originally Posted By StevieJ309:
I kind of want to build my version of a Block III using the Sand colored Geissele rail as a base. It probably won't happen, though. Is this what you had in mind? http://i1026.photobucket.com/albums/y322/_MacGyver-/23-1.jpg I want to let you know that you're the reason I decided to put a TD grip on my Block II. I used to hate them but then I saw it on yours and it just looks awesome! |
|
|
|
Are black M4A1 RIS II rails welcome here? or is this dark earth only territory?
|
|
|
Originally Posted By Wormydog1987:
Are black M4A1 RIS II rails welcome here? or is this dark earth only territory? Spray paint it |
|
|
Originally Posted By JShepard:
Originally Posted By StevieJ309:
I kind of want to build my version of a Block III using the Sand colored Geissele rail as a base. It probably won't happen, though. Is this what you had in mind? http://i1026.photobucket.com/albums/y322/_MacGyver-/23-1.jpg Nice! I picked up the Geissele Rail a few months ago but, haven't gotten around to building it yet..Gonna end up similar to yours.. |
|
Freedom is not Free..
|
|
Bloodsport2885: Because if your riflemen can't reach it, your marksman can. If your marksman can't reach it, your sniper can. If your sniper can't reach it, your arty/air can. If they can't reach it then fuck that target. He isn't even worried about you.
|
|
|
|
|
Originally Posted By GADeerHunter:
[email=http://www.flickr.com/photos/73307770@N04/8248689520/]http://farm9.staticflickr.com/8062/8248689520_8133544b0e_b.jpg[/email] Battery Tube! |
|
|
|
Originally Posted By thesocialistnetwork:
Only got a few pics of mine.. http://i53.photobucket.com/albums/g71/j0ny4ng/blockII.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0500.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0498.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0502.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0499.jpg And just posted this a page back. http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0501.jpg Best looking one in this thread. |
|
I have never been there or done that and basically have no idea what I''m talking about.
Im in a wheel chair and cant even touch my ears |
|
|
"People don't like the looks of the AK - it's an ugly gun. You can't picture John Wayne carrying an AK. Would he? Probably. He was a practical man."
|
what we do in life..echoes in eternity
|
Originally Posted By ragincajun1919: http://img.photobucket.com/albums/v217/punkrockpoet/DSC00603.jpg http://img.photobucket.com/albums/v217/punkrockpoet/DSC00604.jpg You win page 400. |
|
"People don't like the looks of the AK - it's an ugly gun. You can't picture John Wayne carrying an AK. Would he? Probably. He was a practical man."
|
Originally Posted By RePp:
Originally Posted By thesocialistnetwork:
Only got a few pics of mine.. http://i53.photobucket.com/albums/g71/j0ny4ng/blockII.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0500.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0498.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0502.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0499.jpg And just posted this a page back. http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0501.jpg Best looking one in this thread. Not even close, these guys have some of the baddest rifles I've ever seen. |
|
|
Originally Posted By thesocialistnetwork:
Originally Posted By RePp:
Originally Posted By thesocialistnetwork:
Only got a few pics of mine.. http://i53.photobucket.com/albums/g71/j0ny4ng/blockII.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0500.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0498.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0502.jpg http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0499.jpg And just posted this a page back. http://i53.photobucket.com/albums/g71/j0ny4ng/DSC_0501.jpg Best looking one in this thread. Not even close, these guys have some of the baddest rifles I've ever seen. fake lasers? |
|
I have never been there or done that and basically have no idea what I''m talking about.
Im in a wheel chair and cant even touch my ears |
|
Where are you guys all getting your M3X lights?
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.